Exhibit 10.73

CONFIDENTIAL TREATMENT REQUESTED

INFORMATION FOR WHICH CONFIDENTIAL TREATMENT HAS BEEN REQUESTED IS OMITTED AND NOTED WITH “***”.

AN UNREDACTED VERSION OF THIS DOCUMENT HAS ALSO BEEN PROVIDED TO THE SECURITIES AND EXCHANGE COMMISSION.

 

 

 

Final Execution Version

FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

by and between

RETAILER CREDIT SERVICES, INC.

and

FIRST DATA RESOURCES, LLC

Dated As Of

December 1, 2009

 

 

 


Final Execution Version

 

TABLE OF CONTENTS

 

TABLE OF CONTENTS

     I   

LIST OF SCHEDULES

     IV   
1.  

BACKGROUND AND OBJECTIVES

     1   

1.1

     BACKGROUND      1   

1.2

     OBJECTIVES      1   

1.3

     CONSTRUCTION      2   
2.   DEFINITIONS      2   

2.1

     CERTAIN DEFINITIONS      2   

2.2

     OTHER TERMS      6   
3.   PROVISION OF PRODUCTION SERVICES      6   

3.1

     SCOPE      6   

3.2

     IMPLIED SERVICES      6   

3.3

     OTHER ENTITIES      6   

3.4

     PRODUCTION SERVICES PERFORMED BY RCSI OR THIRD PARTIES      7   

3.5

     COOPERATION WITH THIRD PARTIES      7   

3.6

     EVOLUTION OF THE PRODUCTION SERVICES      8   

3.7

     NEW PRODUCTION SERVICES      8   

3.8

     SYSTEM ENHANCEMENTS      9   
4.  

TERM

     10   

4.1

     INITIAL TERM      10   

4.2

     EXTENSION      10   
5.  

FIRST DATA PERSONNEL

     10   

5.1

     KEY FIRST DATA POSITIONS      10   

5.2

     QUALIFICATIONS, RETENTION AND REPLACEMENT OF FIRST DATA PERSONNEL      11   
6.  

PERFORMANCE

     12   

6.1

     MANNER OF PERFORMANCE      12   

6.2

     PLACE OF PERFORMANCE      13   

6.3

     TIME OF PERFORMANCE      13   

6.4

     PERFORMANCE IMPROVEMENT      13   

6.5

     COMPLIANCE WITH LAWS      13   

6.6

     COMPLIANCE WITH RCSI’S SECURITY REQUIREMENTS      14   

6.7

     COMPLIANCE WITH RCSI STATEMENT OF PRINCIPLES ON HUMAN RIGHTS      15   

6.8

     COMPLIANCE WITH RCSI INTEGRITY POLICIES      15   

6.9

     CANADIAN REQUIREMENTS      15   
7.  

PROJECT AND CONTRACT MANAGEMENT

     15   

7.1

     FIRST DATA - RCSI CONTACTS      15   

7.2

     STEERING COMMITTEE      16   

7.3

     REPORTS AND MEETINGS      16   

7.4

     PROCEDURES MANUAL      19   

7.5

     CHANGE CONTROL PROCEDURE      19   

7.6

     USE OF SUBCONTRACTORS      21   

7.7

     QUALITY ASSURANCE AND IMPROVEMENT PROGRAMS      22   

7.8

     PRODUCTIVITY AND MANAGEMENT TOOLS      22   

7.9

     RESTRICTIVE COVENANT      23   

 

 

PSA    i    RCSI / First Data Confidential


Final Execution Version

 

8.  

AUDITS

     23   

8.1

     AUDIT RIGHTS      23   

8.2

     AUDIT FOLLOW-UP      24   

8.3

     ANNUAL AUDIT      25   

8.4

     RECORD KEEPING AND RECORD RETENTION      25   

8.5

     SCOPE OF AUDITS      26   

8.6

     CONFIDENTIALITY OF AUDITS      26   

8.7

     FINANCIAL REPORTS      26   
9.  

RCSI RESPONSIBILITIES

     26   

9.1

     RESPONSIBILITIES      26   

9.2

     SAVINGS CLAUSE      26   
10.  

CHARGES

     27   

10.1

     GENERAL      27   

10.2

     PASS-THROUGH EXPENSES      27   

10.3

     INCIDENTAL EXPENSES      27   

10.4

     TAXES      28   
11.  

INVOICING AND PAYMENT

     30   

11.1

     INVOICING      30   

11.2

     PAYMENT DUE      30   

11.3

     ACCOUNTABILITY      30   

11.4

     PRORATION      31   

11.5

     REFUNDABLE ITEMS      31   

11.6

     DEDUCTION      31   

11.7

     DISPUTED CHARGES      31   
12.  

SAFEGUARDING OF DATA; CONFIDENTIALITY

     31   

12.1

     RCSI INFORMATION      31   

12.2

     SAFEGUARDING RCSI DATA      32   

12.3

     FIRST DATA INFORMATION      32   

12.4

     SAFEGUARDING FIRST DATA DATA      33   

12.5

     CONFIDENTIALITY      33   

12.6

     RETURN OR DESTRUCTION      36   

12.7

     PROVISIONS FOR DATA COMPLIANCE      36   

12.8

     SECURITY ASSESSMENT/DUE DILIGENCE      37   

12.9

     SURVIVAL      37   
13.  

REPRESENTATIONS AND WARRANTIES

     37   

13.1

     WORK STANDARDS      37   

13.2

     MAINTENANCE      37   

13.3

     EFFICIENCY AND COST EFFECTIVENESS      38   

13.4

     TECHNOLOGY      38   

13.5

     NON-INFRINGEMENT      38   

13.6

     OWNERSHIP AND USE OF SOFTWARE AND RELATED MATERIALS      38   

13.7

     ABSENCE OF LITIGATION      38   

13.8

     INDUCEMENTS      38   

13.9

     VIRUSES      38   

13.10

     DISABLING CODE      39   

13.11

     DISCLAIMER      39   

 

 

PSA    ii    RCSI / First Data Confidential


Final Execution Version

 

14.  

INSURANCE AND RISK OF LOSS

     39   

14.1

    INSURANCE      39   

14.2

    RISK OF LOSS      40   

15.

 

INDEMNITIES

     40   

15.1

    INDEMNITY BY FIRST DATA      40   

15.2

    INDEMNITY BY RCSI      41   

15.3

    ADDITIONAL INDEMNITIES      42   

15.4

    INFRINGEMENT      42   

15.5

    INDEMNIFICATION PROCEDURES      42   

15.6

    SUBROGATION      43   

16.

 

LIABILITY

     43   

16.1

    GENERAL INTENT      43   

16.2

    LIABILITY LIMITATIONS      43   

16.3

    FORCE MAJEURE      44   

17.

 

DISPUTE RESOLUTION

     45   

17.1

    INFORMAL DISPUTE RESOLUTION      45   

17.2

    ARBITRATION      46   

17.3

    LITIGATION      47   

17.4

    CONTINUED PERFORMANCE      47   

17.5

    GOVERNING LAW      47   

18.

 

TERMINATION

     48   

18.1

    TERMINATION FOR CAUSE      48   

18.2

    TERMINATION UPON CHANGE OF CONTROL      49   

18.3

    TERMINATION FOR CONVENIENCE      49   

18.4

    TERMINATION DUE TO FAILURE BY FIRST DATA TO RESET PURSUANT TO SECTION 16.2(D)      49   

18.5

    EXTENSION OF TERMINATION EFFECTIVE DATE      49   

18.6

    TERMINATION/EXPIRATION ASSISTANCE      49   

18.7

    EQUITABLE REMEDIES      52   

19.

 

GENERAL

     53   

19.1

    BINDING NATURE AND ASSIGNMENT      53   

19.2

    ENTIRE AGREEMENT; AMENDMENT      53   

19.3

    NOTICES      53   

19.4

    COUNTERPARTS      54   

19.5

    MUTUAL RELEASE OF CLAIMS      54   

19.6

    HEADINGS      54   

19.7

    RELATIONSHIP OF THE PARTIES      55   

19.8

    SEVERABILITY      55   

19.9

    CONSENTS AND APPROVAL      55   

19.10

    WAIVER OF DEFAULT; CUMULATIVE REMEDIES      55   

19.11

    SURVIVAL      55   

19.12

    PUBLIC DISCLOSURES      55   

19.13

    SERVICE MARKS      56   

19.14

    THIRD PARTY BENEFICIARIES      56   

19.15

    COVENANT OF GOOD FAITH      56   

19.16

    ORDER OF PRECEDENCE      56   

19.17

    INTERPRETATION      56   

19.18

    RELATIONSHIP TO ORIGINAL AGREEMENT      57   

 

 

PSA    iii    RCSI / First Data Confidential


Final Execution Version

 

LIST OF SCHEDULES

 

Schedule A:    Services
Schedule B:    Service Levels
Schedule C:    Charges by First Data to RCSI
Schedule D:    Key First Data Positions
Schedule E:    Facilities
Schedule F:    *** Subcontractors
Schedule G:    Reports
Schedule H:    Human Rights
Schedule I:    RCSI Integrity Policies
Schedule X:    Miscellaneous Provisions
Schedule Y:    Concordance

 

 

PSA    iv    RCSI / First Data Confidential


Final Execution Version

 

FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

First Amended and Restated Production Services Agreement (the “Agreement”), executed as of August 19, 2009 (the “Execution Date”) and entered into and effective as of December 1, 2009 (the “Effective Date”), by and between RETAILER CREDIT SERVICES, INC., a Utah corporation, with offices at 170 Election Road, Draper, Utah 84020-6425 and FIRST DATA RESOURCES, LLC (“First Data”), a Delaware corporation with offices at 6855 Pine Street, Omaha, Nebraska 68106. As used in this Agreement, “Party” means either RCSI or First Data, as appropriate, and “Parties” means RCSI and First Data. The Parties agree that the following terms and conditions shall apply to the services to be provided by First Data under this Agreement in consideration of certain payments to be made by RCSI.

 

1. BACKGROUND AND OBJECTIVES

1.1 Background.

This Agreement is being made and entered into with reference to the following:

(a) On November 16, 1999 RCSI (then known as Montgomery Ward Credit Corporation) and First Data’s predecessor in interest, First Data Resources Inc., entered into a Production Services Agreement (hereinafter defined as the “Original Agreement”). The Original Agreement has been amended by the Parties numerous times. As more fully provided in Section 19.18, this First Amended and Restated Production Services Agreement replaces and supersedes the Original Agreement, as amended, in its entirety.

(b) RCSI and First Data are also parties to a Technology Sourcing Agreement, dated as of December 10, 1998, as amended (the “TSA”) pursuant to which First Data provides to RCSI and its Affiliates various Transaction Card data processing and related services, which services relate to, but do not include, the services described in this Agreement.

(c) RCSI desires that certain production and related services, including printing and mailing of Statements and Letters and Transaction Card embossing be performed and managed by an experienced and capable vendor skilled in the performance of these functions.

(d) First Data wishes to perform the requested services for RCSI and has the skills, qualifications and experience necessary to perform and manage such services in an efficient, cost-effective and controlled manner with a high degree of quality and responsiveness.

1.2 Objectives.

The following are specific goals and objectives for this Agreement:

(a) enable RCSI and RCSI Affiliates to focus on their core competencies and on those activities which provide a competitive advantage;

 

 

PSA    1    RCSI / First Data Confidential


Final Execution Version

 

(b) deliver to RCSI and RCSI Affiliates Six Sigma level quality, including through the provision of relevant production skills, methods, practices and standards;

(c) establish a flexible framework within which to quickly respond to evolving processes, technologies, competitive conditions, and changing RCSI and RCSI Affiliate business needs;

(d) identify means to improve services and reduce costs to RCSI and RCSI Affiliates and enable RCSI and RCSI Affiliates to improve and expand their respective related business operations; and

(e) provide the uninterrupted transitioning of responsibility for performing the services back to RCSI or its Successor in connection with the termination or expiration of this Agreement.

1.3 Construction.

The provisions of this Section 1 are intended to be a general introduction to this Agreement and are not intended to expand the scope of the Parties’ obligations under this Agreement or to alter the plain meaning of the terms and conditions of this Agreement. However, to the extent the terms and conditions of this Agreement do not address a particular circumstance or are otherwise unclear or ambiguous, such terms and conditions are to be interpreted and construed so far as to give effect to the provisions in this Section 1.

 

2. DEFINITIONS

2.1 Certain Definitions.

As used in this Agreement:

(a) “Affiliate” means, with respect to any entity, any other entity Controlling, Controlled by or under common Control with such entity (and, in the case of RCSI, includes GECC).

(b) “Ancillary Services” shall mean those services listed on Exhibit C-4 to Schedule C of this Agreement.

(c) “Asset Purchase Agreement” shall mean the Asset Purchase Agreement, dated as of November 16, 1999, between the Parties.

(d) “Background Checks” shall have the meaning given in Section 5.2(b).

(e) “Change Control Procedure” means the processes and procedures to be followed by the Parties for considering, analyzing, approving (or rejecting) and carrying out Changes requested or proposed by either Party.

(f) “Change Order” means the form of an order documenting the terms of the Parties’ agreement regarding a Change to the Production Services then being provided.

(g) “Confidential Information” has the meaning given in Section 12.5(a).

(h) “Control” and its derivatives means with regard to any entity the legal, beneficial or equitable ownership, directly or indirectly, of twenty-five percent (25%)

 

 

PSA    2    RCSI / First Data Confidential


Final Execution Version

 

or more of the capital stock (or other equity ownership interest, if not a corporation) of such entity ordinarily having voting rights; provided, however, that with respect to the definition of “Major Competitor” and Section 18.2 only, the applicable percentage shall be fifty percent (50%).

(i) “Coupons” means documents that entitle a consumer to discounts, rewards, rebates, points, gift(s) or other special offer which provide incentives to the Cardholder on current or future purchases or transaction activity. A coupon is most commonly separated from the main Statement information and often accompanied by a coupon code and/or bar code used to entitle the consumer to the incentive.

(j) “Customer” has the meaning given in Section 7.9.

(k) “Default Rate” means the rate identified as the prime rate as published in The Wall Street Journal from time to time.

(l) “Effective Date” has the meaning given in the first paragraph of this Agreement. Various provisions in this Agreement are effective prior to the Effective Date as so stipulated in such provision.

(m) “First Data Confidential Information” has the meaning given in Section 12.5(c).

(n) “First Data Contract Administrator” has the meaning given in Section 5.1(a)(ii).

(o) “First Data Data” shall mean information, whether or not Confidential Information, transmitted to or entered in software or equipment by or on behalf of any clients of First Data, other than RCSI and its Affiliates and RCSI Customers, and information derived from such information, including as stored in or processed through the First Data System.

(p) “First Data Equipment” means the equipment which is owned or leased (as lessee) by First Data or is otherwise within First Data’s control.

(q) “First Data Information” means all information, in any form, furnished or made available directly or indirectly by First Data to RCSI or otherwise obtained by RCSI from First Data.

(r) “First Data Personnel” means employees of First Data and its approved Subcontractors assigned to perform the Production Services pursuant to this Agreement.

(s) “First Data Software” means (i) the First Data-owned software and the third party software licensed to First Data which is utilized by First Data in performing the Production Services and (ii) the documentation (in any format) necessary for the use of the software referenced in clause (i).

(t) “First Data System” means the First Data Equipment, First Data Software, the hardware, the systems incorporating such software and hardware and the documentation (in any format) and the processes used to provide the Production Services (specifically excluding the data processing software and system used to provide TSA Services).

 

 

PSA    3    RCSI / First Data Confidential


Final Execution Version

 

(u) “GECC” means General Electric Capital Corporation, a Delaware corporation.

(v) “GE Consumer Finance” means the divisions of GECC conducting consumer finance operations as of the Effective Date.

(w) “GECOM/Prox/CARMS Portfolio” or “GECOM/Prox” means RCSI’s GE Commercial Line Account portfolio.

(x) “GLB Act” has the meaning given in Section 12.7(a).

(y) “Including” and its derivatives (such as “include” and “includes”) means including without limitation. This term is as defined, whether or not capitalized in this Agreement.

(z) “Initial Term” has the meaning given in Section 4.1.

(aa) “Key First Data Positions” has the meaning given in Section 5.1(a).

(bb) “Losses” means all losses, liabilities, damages and claims, and all related costs and expenses (including reasonable legal fees and disbursements and costs of investigation, litigation, settlement, judgment, interest and penalties).

(cc) “License Agreement” shall mean the License Agreement, dated as of November 19, 1999, between the Parties.

(dd) “Major Competitor” means, with respect to RCSI, the following entities: *** and the respective Affiliates and successors thereof.

(ee) “Majority Owned Affiliate” shall mean an Affiliate where control is measured at greater than fifty percent (50%).

(ff) “New Production Service(s)” has the meaning given in Section 3.7(a).

(gg) “Non-Public Personal Information” has the meaning given in Section 12.7(c).

(hh) “Original Agreement” means the Production Services Agreement, dated November 16, 1999, as amended, between the Parties and their predecessors.

(ii) “Original Effective Date” means November 16, 1999.

(jj) “Party” and “Parties” have the meanings given in the first paragraph of this Agreement.

(kk) “Pass-Through Expenses” means the reasonable and actual out-of-pocket expenses reasonably incurred by First Data for equipment, materials, supplies, or other services provided to RCSI under this Agreement (which expenses do not include First Data’s overhead costs (or allocations thereof), administrative expenses or other mark-ups) which RCSI has agreed in writing to pay directly or for which it will reimburse First Data. Pass-Through Expenses agreed upon as of the Effective Date are listed in Schedule C, Exhibit C-3 hereto.

(ll) “Procedures Manual” means the standards and procedures manual described in Section 7.4(a).

(mm) “Production Services” has the meaning given in Section 3.1.

 

 

PSA    4    RCSI / First Data Confidential


Final Execution Version

 

(nn) “Production Year” has the meaning given in Section 4.1.

(oo) “RCSI Confidential Information” has the meaning given in Section 12.5(b).

(pp) “RCSI Customer Information” has the meaning given in Section 12.7.

(qq) “RCSI Customers” means customers of RCSI or of any RCSI Affiliate who receive, or contract to receive, from RCSI or any RCSI Affiliate production and related services of the type described in this Agreement.

(rr) “RCSI Customer Contracts” means any contract or agreement entered into at any time, either before or after the Effective Date, between RCSI or an RCSI Affiliate and another entity for the provision of production and related services of the type described in this Agreement.

(ss) “RCSI Data” means all information, whether or not Confidential Information, transmitted to or entered in software or equipment by or on behalf of RCSI or any RCSI Affiliate and information derived from such information, including as stored in or processed through such equipment or software.

(tt) “RCSI Information” means all information, in any form, furnished or made available directly or indirectly to First Data by RCSI or any RCSI Affiliate or otherwise obtained by First Data from RCSI or any RCSI Affiliate (excluding any information or intellectual property licensed to or acquired by First Data in connection with the Asset Purchase Agreement or License Agreement or otherwise used by First Data with the consent or agreement of RCSI or any RCSI Affiliate).

(uu) “RCSI Initiated System Enhancements” has the meaning given in Section 3.8.

(vv) “Renewal Term” has the meaning given in Section 4.2.

(ww) “Service Recipient” has the meaning given in Section 3.3.

(xx) “Six Sigma’” means, as appropriate, (i) the management philosophy which has as its goal the improvement of processes through a defined methodology of measurement, analysis, modification and control, as that philosophy is interpreted and applied by GECC, RCSI and other RCSI Affiliates from time to time, or (ii) a measurement, which may be expressed as (A) a yield of 99.99966% or (B) 3.4 defects per 1,000,000 units or an equivalent numerical relationship (e.g., 0.34 defects per 100,000 units).

(yy) “Steering Committee” has the meaning given in Section 7.2.

(zz) “System Enhancement” means a material enhancement or modification to, any system, hardware, application or functionality of the First Data System, but does not include changes required to be made by First Data in order to comply with First Data’s obligation to provide the Production Services pursuant to this Agreement including Sections 3.1, 3.2, 13.2, and 13.4. A System Enhancement is not a New Production Service.

(aaa) “Term” has the meaning given in Section 4.1.

(bbb) “TSA” has the meaning given in Section 1.1(b).

 

 

PSA    5    RCSI / First Data Confidential


Final Execution Version

 

(ccc) “TSA Services” means the services provided by First Data under the TSA.

(ddd) “Virus” means: (i) program code, programming instruction or set of instructions intentionally constructed with the ability to damage, interfere with or otherwise adversely affect computer programs, data files or operations; or (ii) other code of the type typically designated to be a computer virus.

2.2 Other Terms.

Other terms used in this Agreement are defined in the context in which they are used and shall have the meanings there indicated. In addition, certain terms used in this Agreement are defined in the TSA (as indicated) and shall have the meanings given therein. Terms used as defined terms in both this Agreement and the TSA, but defined differently, shall, as to this Agreement, have the meanings given in this Agreement.

 

3. PROVISION OF PRODUCTION SERVICES

3.1 Scope.

The Production Services consist of First Data’s obligations expressly provided for in this Agreement, including those described in Schedule A, as they may evolve and be supplemented, modified, changed pursuant to the Change Control Procedure, or replaced during the Term. First Data shall provide the following services, functions and responsibilities, as they may evolve during the Term and as they may be supplemented, enhanced, modified or replaced (the “Production Services”):

(a) the services, functions and responsibilities described in this Agreement, including its Schedules and Exhibits;

(b) except as otherwise expressly provided in this Agreement, providing the facilities, personnel and other resources as necessary to provide the Production Services; and

(c) any New Production Services and/or Changes RCSI contracts with First Data to perform pursuant to a Change Order or amendment in accordance with Section 19.2.

3.2 Implied Services.

If any services, functions or responsibilities not specifically described in this Agreement are necessarily required for the proper performance and provision of the Production Services (and are not required to be provided by First Data under the TSA), they shall be deemed to be implied by and included within the scope of the Production Services to the same extent and in the same manner as if specifically described in this Agreement.

3.3 Other Entities.

First Data shall provide the Production Services (a) to RCSI and, as may be requested by RCSI, the RCSI Customers, (b) to those entities to whom services similar to the Production Services were being provided immediately prior to the Original Effective Date, (c) as requested by RCSI, to other RCSI components and

 

 

PSA    6    RCSI / First Data Confidential


Final Execution Version

 

Affiliates and clients and customers thereof, and (d) to those other entities as may be identified by RCSI from time to time (each, a “Service Recipient”). To the extent that Production Services are characterized herein as provided to RCSI, those references will be deemed to include those Production Services provided to the Service Recipients. For purposes of this Agreement, Production Services provided to Service Recipients other than RCSI shall be deemed to be Production Services provided to RCSI.

3.4 Production Services Performed by RCSI or Third Parties.

(a) First Data is a non-exclusive provider of Production Services. Except as provided otherwise in Section 5 of Exhibit C (Minimum Volume Commitment) RCSI may perform itself, discontinue, or retain third parties to perform any of the Production Services. Without limitation of the foregoing, RCSI may sell Accounts, portfolios or lines of business which are receiving the Production Services, and if so elected by RCSI any such sold Accounts, portfolios or lines of business will no longer be subject to this Agreement. RCSI also may acquire Accounts, portfolios or lines of business and to provide, or have third parties provide, Production Services in connection with such Accounts, portfolios or lines of business separately from this Agreement and the Production Services provided hereunder. Except as provided otherwise in Section 5 of Exhibit C (Minimum Volume Commitment), RCSI makes no commitment for any minimum amount of Production Services to be purchased under this Agreement. For the avoidance of doubt, First Data’s approval is not required for any reduction of Production Services that RCSI is entitled to make pursuant to the provisions of this Agreement, and any requirement that such changes be documented through the Change Control Procedure shall not be deemed to require First Data’s approval.

(b) If a component of the Basic Production Services or any other bundled Production Service is reduced pursuant to this Section 3.4, the charges for the Basic Production Services shall be equitably adjusted in good faith to reflect *** to First Data resulting from First Data’s ceasing to provide the component of the Basic Production Services or any other bundled Production Service no longer required. The Parties acknowledge that, due to the nature of the pricing in Schedule C hereto, in many instances no changes will be required to the charges described in Schedule C and in other instances (including unbundled Production Services) charges will be eliminated if a component is reduced pursuant hereto.

3.5 Cooperation with Third Parties

(a) If RCSI performs or discontinues any of the Production Services itself or retains a third party to do so, First Data shall cooperate with RCSI and any such third party, as reasonably necessary to enable each of RCSI and such third party to perform its respective work, which cooperation shall include: (i) to the extent that First Data exercises any control over any RCSI facilities or any facility of an RCSI Affiliate being used to provide the Production Services, providing reasonable access to such facilities; (ii) providing reasonable access to the First Data System (to the extent permitted under any underlying agreements with third parties) and to the other relevant First Data-operated production facilities; and (iii) providing such information regarding the operating environment, system constraints and other parameters as a person with reasonable commercial skills and expertise would find

 

 

PSA    7    RCSI / First Data Confidential


Final Execution Version

 

reasonably necessary for RCSI or a third party to perform its work. Third parties retained by RCSI shall comply with First Data’s reasonable security and confidentiality requirements, and shall, to the extent performing work interfacing with the First Data System or First Data Equipment, comply with First Data’s reasonable work standards, methodologies and procedures.

(b) First Data shall promptly notify RCSI if an act or omission of such a third party may cause a problem or delay in providing the Production Services and shall work with RCSI to prevent or circumvent such problem or delay.

3.6 Evolution of the Production Services

RCSI operates in a business environment characterized by constant change. Accordingly, First Data will use commercially reasonable efforts throughout the Term to evolve and improve the quality, efficiency and effectiveness of the Production Services (including technology) consistent with similar services provided by leading well managed credit card industry operations performing services similar to the Production Services. Changes in the Production Services pursuant to this Section 3.6 will not be considered New Production Services unless they otherwise qualify as such in accordance with the provisions of Section 3.7, but will be subject to the Change Control Procedure, as applicable.

3.7 New Production Services

(a) “New Production Services” means functions RCSI requests First Data to perform under this Agreement that are (i) materially different from, and in addition to, the Production Services then being provided under this Agreement and (ii) not Services or New Services (as defined in the TSA) under the TSA. Subject to Section 3.7(b), RCSI will notify First Data if RCSI desires to acquire additional services which would constitute New Production Services. Within *** Business Days following the date of such notification, First Data will provide RCSI with a quote for one-time development and ongoing service fees (or revised Schedule C charges) for such functions which take into account (A) the existing volume of business between First Data and RCSI, and (B) the elimination or modification of Production Services and related tasks which would be replaced or changed by the proposed New Production Services. Such proposed charges shall *** (a) *** such New Production Services as provided in *** and (b) *** for such New Production Services ***. Upon receipt of such quote, RCSI may elect to have First Data implement and perform such services, at which point such services will be deemed Production Services and shall be subject to the provisions of this Agreement. If RCSI elects to have First Data implement and perform such New Production Services and at any time thereafter *** for such New Production Service First Data shall, ***.

(b) At the time RCSI requests the First Data Contract Administrator (or begins receiving, either as a result of an independent action of RCSI to initiate use of an available service offering or as a result of a request by RCSI to another individual at First Data) a Production Service that First Data believes is a New Production Service First Data shall notify the RCSI Relationship Executive within *** days of the request (or ***) days if the parenthetical above applies) that First Data believes that it is a New Production Service. If First Data does not notify the

 

 

PSA    8    RCSI / First Data Confidential


Final Execution Version

 

RCSI Relationship Executive that First Data considers such a New Production Service within the requisite period then ***. For any proposed or contemplated service that is within the general scope of the Production Services, if First Data and RCSI are unable to agree on whether such item is a New Production Service or what charges and other terms and conditions should be applicable thereto, ***, subject to the resolution of any such dispute in accordance with the provisions of this Agreement. Once the Parties have agreed on the charges and other terms and conditions any charges shall be ***. Until the matter is resolved ***. In accordance with processes to be mutually agreed upon, RCSI shall use commercially reasonable efforts to identify and notify First Data on or before RCSI independently begins to use an available service offering that RCSI reasonably believes First Data may consider a New Production Service (it being understood that RCSI shall not be responsible if such processes do not identify changes to RCSI’s usage in order for RCSI to provide notification).

(c) Unless otherwise agreed to by the Parties, all application development services, application maintenance services, and implementation services therefor undertaken or provided in connection with providing or implementing a New Production Service or RCSI-Initiated System Enhancement shall be governed by the terms of the TSA, including the applicable pricing terms, representations and warranties, and terms of Schedule A thereto; provided, however, that any disputes between the Parties concerning such services and any breach of the terms of this Agreement or the applicable terms of the TSA in connection with such services, including any related liability and limitations thereon, and indemnification obligations of the Parties in connection therewith, shall be governed by the terms of this Agreement.

(d) During the Term, if First Data initiates a program with one or more customer(s) to review, modify, test or enhance any New Production Services which First Data intends to offer generally to its customers, then First Data shall allow RCSI the opportunity to participate in such program (the “Pilot Program”). If RCSI desires to use the New Production Service, RCSI shall be charged for such New Production Service in accordance with Section 3.7(a). During the Term, if First Data offers generally to its customers any New Production Service without the establishment of a Pilot Program, then no later than the time that First Data first notifies its other customers of such New Production Service First Data shall notify RCSI.

(e) Except as provided above, First Data will not perform any additional functions that would constitute New Production Services without first informing RCSI and receiving RCSI’s written authorization to proceed. If First Data performs the additional functions without RCSI’s prior written authorization, such functions will be ***.

3.8 System Enhancements.

(a) First Data shall not *** of the Production Services to RCSI as a result of First Data’s unilateral implementation of any System Enhancements.

(b) First Data may charge RCSI or revise Exhibit C pricing only pursuant to a written agreement with RCSI (and not on a unilateral basis) for any System Enhancements requested by RCSI (“RCSI-Initiated System Enhancements”) ***.

 

 

PSA    9    RCSI / First Data Confidential


Final Execution Version

 

4. TERM

4.1 Initial Term.

The term of this Agreement (the “Term”) shall begin on the Effective Date and shall extend for five (5) Production Years (the “Initial Term”) unless terminated earlier or extended in accordance with this Agreement. “Production Year 1” of the Term shall commence on the Effective Date and shall continue through the last day of the twelfth (12th) consecutive month thereafter. A “Production Year” means each of Production Year 1 and each twelve (12) month period thereafter (beginning on the first anniversary of the first day of Production Year 1).

4.2 Extension.

Upon at least (6) months’ written notice prior the expiration of the Initial Term or any Renewal Term, RCSI may extend the Term for additional renewal terms of up to two (2) years on the terms in force at the time of such extension (a “Renewal Term”). RCSI has the option for three (3) such Renewal Terms, for a maximum extension beyond the Initial Term of six (6) years.

 

5. FIRST DATA PERSONNEL

5.1 Key First Data Positions.

(a) “Key First Data Positions” are listed in Schedule D hereto. First Data shall cause each of the personnel filling the Key First Data Positions (other than the First Data Contract Administrator) to devote his or her full time and effort to the provision of the Production Services (or jointly with the Services under the TSA)(unless indicated in Schedule D that the position is not full time on RCSI’s account).

(i) RCSI may from time to time change the positions designated as Key First Data Positions under this Agreement, provided that without First Data’s consent, the number of Key First Data Positions shall not exceed the number specified in Schedule D as of the Effective Date.

(ii) In accordance with Section 5.1(b) below, First Data shall designate an individual to serve as “First Data Contract Administrator”. The First Data Contract Administrator shall (A) serve as the single point of accountability for First Data for the Production Services, (B) have day-to-day authority for undertaking to ensure customer satisfaction, and (C) have a corporate title of Vice President or higher. The First Data Contract Administrator’s compensation shall include significant financial incentives based on RCSI’s satisfaction with (1) the performance of Production Services, (2) First Data’s contribution to RCSI’s achievement of its objectives, as relevant, and (3) retention of applicable First Data Personnel. Such basis for financial incentives shall be in conjunction and consistent with those objectives in equivalent RCSI/RCSI Affiliate and First Data management positions.

 

 

PSA    10    RCSI / First Data Confidential


Final Execution Version

 

(b) Before assigning an individual to a Key First Data Position, whether as an initial assignment or a subsequent assignment, First Data shall notify RCSI of the proposed assignment, shall introduce the individual to appropriate RCSI representatives (and, upon request, provide such representatives with the opportunity to meet with the individual) and shall provide RCSI with a resume and other information about the individual reasonably requested by RCSI. If RCSI in good faith objects to the proposed assignment, the Parties shall attempt to resolve RCSI’s concerns on a mutually agreeable basis, including through discussions of the pertinent issues by senior management of the Parties. If the Parties have not been able to resolve RCSI’s concerns within ten (10) days of the date RCSI communicated to First Data its objections to the proposed assignment, First Data shall not assign the individual to that position and shall propose to RCSI the assignment of another individual of suitable ability and qualifications. Personnel filling Key First Data Positions may not be transferred or re-assigned until a suitable replacement has been approved by RCSI and the replacement has been successfully transitioned into the Key First Data Position. Further, the timing for any transfer or reassignment of persons filling Key First Data Positions will be closely coordinated with the requirements of ongoing projects and other elements of the Production Services, and no transfer or reassignment will occur at a time that would adversely impact the Production Services in a non-trivial manner.

(c) The personnel approved as of the Effective Date to fill the Key First Data Positions are listed in Schedule D. Subject to promotions, dismissals, resignations and medical leave, such persons will remain in these positions for the period specified in Schedule D.

5.2 Qualifications, Retention and Replacement of First Data Personnel.

(a) First Data shall assign an adequate number of personnel to perform the Production Services. The personnel First Data assigns to perform the Production Services shall be properly educated, trained and fully qualified for the Production Services they are to perform.

(b) First Data shall, at no additional expense to RCSI, and prior to placing any First Data Personnel on the RCSI account, complete background checks for all such personnel (“Background Checks”), which Background Checks may be (or have been) performed at the initiation of the individual’s employment with First Data (or its predecessors). Background Checks shall include verification of work history, verification of the lawful right to work in the United States drug testing (for employees whose employment began after January 1, 2005), and such other background checks as First Data performs with regard to similar employees generally. Background Checks shall also identify felony convictions which bear a reasonable relationship to the position and verify the social security number of such personnel, if applicable to such personnel. The personnel will be asked for educational background data and, with respect to United States resident personnel, at least the last seven (7) years of residence. Subject to applicable Law, First Data Personnel may be tested for drugs and/or alcohol whenever First Data or RCSI has reasonable suspicion that the personnel is under the influence of drugs and/or alcohol in the workplace or has violated the substance abuse policy. Results of

 

 

PSA    11    RCSI / First Data Confidential


Final Execution Version

 

Background Checks and drug testing will remain First Data’s confidential information and will not be provided to RCSI, but any negative or questionable background check or drug test of personnel will require First Data to remove or not assign such personnel to providing the Production Services. First Data shall hire all First Data Personnel and other personnel involved in the RCSI account strictly in accordance with all Laws applicable to the hiring and employment of individuals including all equal employment opportunity Laws. First Data agrees not to use any child labor or prison inmates nor shall it contract with any prison system to perform any Production Services under this Agreement.

(c) RCSI and First Data both agree that it is in their best interests to keep the turnover rate of the First Data Personnel performing the Production Services to a reasonably low level. Accordingly, if RCSI believes that First Data’s turnover rate may be excessive and so notifies First Data, First Data shall provide data concerning its turnover rate, meet with RCSI to discuss the reasons for, and impact of, the turnover rate and otherwise use its best efforts to keep such turnover rate to a reasonably low level. If appropriate, First Data shall submit to RCSI its proposals for reducing the turnover rate, and the Parties will mutually agree on a program to bring the turnover rate down to an acceptable level. In any event, notwithstanding transfer or turnover of personnel, First Data remains obligated to perform the Production Services without degradation and in accordance with this Agreement.

(d) If RCSI determines in good faith that the continued assignment to the RCSI account of any particular First Data Personnel is not in the best interests of RCSI, then RCSI will give First Data written notice to that effect. After receipt of such notice, First Data shall have a reasonable period of time (not greater than ten (10) days) in which to investigate the matters stated in such notice, discuss its findings with RCSI and resolve any problems with such person. As requested by First Data, senior management of the Parties shall address and discuss the pertinent issues during the referenced time period. If, following this period, RCSI requests replacement of such person, First Data shall promptly replace that person with another person of suitable ability and qualifications.

 

6. PERFORMANCE

6.1 Manner of Performance.

First Data shall perform the Production Services at least at the same level and with at least the same degree of accuracy, quality, completeness, timeliness, responsiveness and efficiency of the greater of (a) as provided by RCSI and the RCSI Affiliates prior to the Original Effective Date, and (b) as is consistent with the *** standards which First Data is required to meet for the other customers for whom it provides services substantially similar to the Production Services using similar equipment. Quantitative performance standards and Service Levels for certain of the Production Services are set forth in Schedule B. At all times, First Data’s level of performance of the Production Services shall be at least equal to the Service Levels and otherwise not less than commercially reasonable standards satisfied by leading well managed credit card industry operations performing services similar to the Production Services.

 

 

PSA    12    RCSI / First Data Confidential


Final Execution Version

 

6.2 Place of Performance.

First Data may perform the Production Services at, and deliver the Production Services from, any First Data-operated facility in the United States. Production Services or New Production Services provided from or to locations outside the continental United States or (with respect to Canadian Production Services) Canada may require new service definitions and/or charges to be created by mutual agreement of the Parties in their sole discretion (and corresponding amendment to this Agreement). Schedule E provides a list of the primary First Data facilities from which First Data provides the Production Services as of the Execution Date.

6.3 Time of Performance

(a) First Data will perform and complete the Production Services diligently, in a timely manner, and in accordance with any applicable time schedules provided in this Agreement (including in any Change Orders).

(b) First Data will notify RCSI within a commercially reasonable time following First Data becoming aware of any circumstances that may materially impact the timely and successful completion (or delivery) of any Production Service. Without prejudice to any remedies available to RCSI, First Data will use commercially reasonable efforts to avoid or minimize any delays in performance. In such event, First Data will inform RCSI of the steps First Data is taking or will take to do so and the projected actual completion (or delivery) time. If a time period for notice or cure is provided in Schedule A or the Procedures Manual such time period shall control.

6.4 Performance Improvement

First Data will perform in a proactive manner, actively identifying ways to improve RCSI’s customer experience, efficiency, and cost profile.

6.5 Compliance with Laws

(a) First Data is solely responsible for compliance with laws, regulations, ordinances and codes (including identifying and procuring required permits, certificates, approvals and inspections) applicable to First Data as a third party provider of production-related services. If a charge of non-compliance which may have an adverse impact on RCSI occurs, First Data promptly shall notify RCSI of such charge in writing. First Data shall maintain the First Data System so that the First Data System contains functionality enabling RCSI to comply with the Legal Requirements to the extent the Legal Requirements pertain to RCSI and any RCSI activities for which RCSI uses the Production Services.

(b) RCSI is solely responsible for monitoring and interpreting the federal, state and local laws, regulations, ordinances and codes pertaining to equal credit opportunity, truth in lending, fair credit billing, fair credit reporting, fair debt collection practices and general consumer protection (the “Legal Requirements”). RCSI is responsible for selecting the available parameter settings and programming

 

 

PSA    13    RCSI / First Data Confidential


Final Execution Version

 

features and options within the First Data System that apply to RCSI’s use of the Production Services in compliance with the Legal Requirements and for determining that such selections are consistent with the Legal Requirements. In making such determinations, RCSI may rely on the descriptions of such settings, features and options provided by First Data. First Data shall review with and explain to RCSI such settings, features and options and shall provide clarification on the operation of such features as requested by RCSI.

(c) Subject to Section 12, each Party shall cooperate in providing information and/or records to the other Party in connection with the examinations, requests or proceedings of its regulatory agencies.

(d) Whenever relevant information is available to First Data, and subject to Section 12, First Data shall share with RCSI information concerning the various compliance practices and interpretive positions taken by its customer base, as well as the understandings which First Data personnel may have with respect to such practices and positions.

(e) Compliance with First Data’s obligations set forth above, as they exist as of the Effective Date, is entirely First Data’s responsibility and no additional charges may be imposed with respect thereto. The additional cost of compliance with changes may be charged to RCSI except where:

(i) Such changes are a result of laws directly applicable to First Data because of the business it is in as opposed to because it serves RCSI in particular;

(ii) Such changes are necessary for RCSI to have the capability described in the last sentence of Section 6.5(a); or

(iii) First Data makes such additional capabilities available to its other customers without additional charge.

6.6 Compliance with RCSI’s Security Requirements.

First Data represents, warrants and covenants that it is, and at all times during the term of this Agreement will continue to be, in full compliance with the then current PCI Data Security Standards issued by the PCI Security Standards Council and in verification thereof, on an annual basis (and at such other times as RCSI may reasonably request), will furnish RCSI with ongoing certifications, questionnaires or other documentation confirming such compliance. If at any time during the Term hereof, First Data fails to be in full compliance with the then current PCI Data Security Standards RCSI shall have the right to terminate this Agreement subject to the cure period provided in Section 18.1(a). RCSI may require First Data to comply from time to time with RCSI’s own data security standards but if such standards are more stringent than (a) then current PCI Data Security Standards, (b) First Data’s standards in effect as of the Execution Date and (c) First Data’s standards at the time, then First Data may charge RCSI for the incremental cost of complying with such standards provided that before implementing such higher standard First Data notifies RCSI that it will be chargeable to RCSI and offers RCSI the opportunity to withdraw its request.

 

 

PSA    14    RCSI / First Data Confidential


Final Execution Version

 

6.7 Compliance with RCSI Statement of Principles on Human Rights

First Data agrees, with respect to any of the Production Services that are provided outside of the United States or Canada, to comply with and adhere to GE’s Statement of Principles on Human Rights (the “RCSI Requirements for Human Rights”) provided in Schedule H (Human Rights) hereto. Updates and changes to the RCSI Requirements for Human Rights may be made by RCSI from time to time, and First Data will adhere to the RCSI Requirements for Human Rights as so updated or changed. First Data covenants that, as applicable, it shall be in full compliance with the then current RCSI Requirements for Human Rights (except to the extent they are inconsistent with the terms of this Agreement), and upon request, First Data will confirm such compliance in writing. If at any time during the Term First Data is providing Production Services outside of the United States and Canada and First Data fails to be in full compliance with the then current RCSI Requirements for Human Rights, if the breach is sufficiently egregious RCSI may terminate this Agreement upon written notice to First Data (without opportunity to cure), without penalty or further obligation of any kind.

6.8 Compliance with RCSI Integrity Policies

First Data acknowledges and agrees that it, its agents and subcontractors shall, when performing the Production Services, comply with RCSI’s applicable integrity policies governing service providers as generally applicable to the Production Services and personnel of First Data, its Affiliates and subcontractors (including, employees, agents, representatives, internal or external consultants or contractors) performing the Production Services or otherwise receiving or accessing RCSI Confidential Information or systems of RCSI, its Affiliates or their respective contractors. If there is any conflict between the provisions of any such integrity policy and the provisions of this Agreement, the provisions of this Agreement will control and resolve the conflict with respect to the subject matter thereof. First Data will provide a copy of RCSI’s integrity policies to all personnel in the Key First Data Positions, have them sign the acknowledgement provided on its back cover, and retain the original signed acknowledgments on file until three (3) years after the expiration or termination of this Agreement. RCSI shall have the right to audit that such acknowledgements are on file with First Data upon notice to First Data. A copy of RCSI’s and its Affiliates’ current integrity policies as of the Execution Date is attached as Schedule I.

6.9 Canadian Requirements

To the extent the Production Services involve RCSI’s Canadian customers, the provisions of Exhibit X-6 shall apply.

 

7. PROJECT AND CONTRACT MANAGEMENT

7.1 First Data - RCSI Contacts.

In terms of providing daily operational support during the Term, unless otherwise requested by RCSI, the First Data Contract Manager shall directly contact

 

 

PSA    15    RCSI / First Data Confidential


Final Execution Version

 

the RCSI Relationship Executive and his or her designees and representatives. Only RCSI or a designee of RCSI (as identified by RCSI to First Data in writing) will be authorized to make commitments on the part of RCSI with First Data that amend this Agreement or waive compliance.

7.2 Steering Committee.

(a) The Parties shall form a steering committee (“Steering Committee”) to provide high-end support and coordination in the relationship between First Data and RCSI. This support may include high-level discussions regarding policies, procedures, guiding principles of the relationship, issues associated with First Data’s execution of the Production Services, allocation of resources, support and understanding of RCSI’s strategic direction and review of RCSI priorities. The Steering Committee shall also serve in an advisory role. The Steering Committee and the actions it takes shall in no way diminish the rights and authority provided to RCSI in this Agreement. The RCSI Relationship Executive shall retain the right to review and reverse the decisions of the Steering Committee.

(b) The Steering Committee shall be comprised of at least four (4) individuals: two (2) appointed by RCSI and two (2) appointed by First Data. The Parties may, upon their mutual consent, add additional persons to the Steering Committee.

7.3 Reports and Meetings.

(a) Reports. At a minimum, First Data shall issue the same combination of performance, utilization and status reports regarding the Production Services at the same frequency as prior to the Effective Date.

(i) First Data will provide:

(A) the reports included in Schedule G at the frequency indicated therein;

(B) up to *** hours of report development to provide reports in addition to those listed in Schedule G during the Initial Term with an *** per year of each Renewal Term (such hours to be increased by *** hours for each new portfolio brought into scope, up to an aggregate addition of *** hours). Upon completion of contractual allotted hours the Parties will mutually agree upon on any changes of type and frequency of reports going forward; and

(C) one (1) full time employee (“FTE”) to perform ad hoc reporting functions in addition to the functions listed in this Section 7.3(a) above.

(ii) The type and frequency of such reports may be changed going forward as the Parties may mutually agree. Additionally, First Data shall issue the performance, financial, utilization and status reports identified in this Agreement, as well as reports reasonably requested by RCSI. Such reports shall be pursuant to the reporting structure jointly developed by the Parties and shall be issued at the frequency reasonably requested by RCSI. First Data shall provide RCSI with suggested formats for such reports, for RCSI’s review and approval. The performance, financial, utilization and status reports shall include the following:

(A) First Data shall provide to RCSI a daily performance report which describes First Data’s performance of the Production Services, including all relevant Service Level and performance measurements, on the previous day. First Data shall also provide to RCSI on Monday of each week a performance report which describes First Data’s performance of the Production Services, including all relevant Service Level and performance measurements, during the week which ended on the Sunday immediately prior to such Monday.

 

 

PSA    16    RCSI / First Data Confidential


Final Execution Version

 

(B) First Data shall provide to RCSI a monthly performance report, which shall be delivered to RCSI by the tenth (10th) Working Day after the end of each month, describing First Data’s performance of the Production Services in the preceding month (the “Monthly Performance Report”). Such report shall (i) separately address First Data’s performance in each area of the Production Services including, as requested by RCSI, by RCSI Customer, lines of business, marketing segment and portfolio; (ii) for each area of the Production Services, assess the degree to which First Data has attained or failed to attain the pertinent objectives in that area, including measurements with respect to the Service Levels; (iii) describe the status of each key project, problem resolution effort, and any other initiative; (iv) explain deviations from the Service Levels and include for each deviation a plan for corrective action; (v) set forth a record of the equipment, software, personnel changes and other changes to the Production Services environment including the First Data System during the reporting period that affect, or could affect, the Production Services and describe the planned changes during the upcoming month that may affect the Production Services; and (vi) include the documentation and other information which RCSI may request to verify compliance with this Agreement. Regarding Internal and External Defects, the Monthly Performance Report shall also contain appropriate details on all (1) Defects and Defectives identified during First Data internal sampling and (2) all External Defects and Defectives that were reported during the previous month. For each External Defect or Defective reported, First Data will fully investigate each incident and will provide the actual number of Defectives that resulted from the incident. Where First Data is not able to provide such specific data to RCSI’s reasonable satisfaction, it shall be presumed that the entire batch, run or job involved was defective, and each Transaction Card, Statement and/or Letter counts as a Defective.

(C) First Data shall provide a quarterly and an annual planned activities report, which shall be delivered to RCSI within five (5) Business Days after the end of each RCSI fiscal quarter and fiscal year, respectively, describing the activities to be undertaken by First Data in connection with the Production Services during the then-current fiscal quarter and the three (3) subsequent fiscal quarters (the “Quarterly Plan”), or the then-current fiscal year and the subsequent fiscal year, respectively (the “Annual Plan”). The Quarterly Plan and Annual Plan shall (i) separately describe each material activity to be undertaken by First Data in connection with the Production Services, including on-going and planned projects, the introduction of new systems and software and the

 

 

PSA    17    RCSI / First Data Confidential


Final Execution Version

 

maintenance releases, enhancements, upgrades, patches, new versions and other releases implemented in connection with the First Data Software which could affect the Production Services or First Data’s delivery thereof; (ii) explain for each such activity the time budgeted for its completion; and (iii) be accompanied by related documentation which may be reasonably requested in advance by RCSI.

(b) Meetings. At the RCSI Relationship Executive’s discretion, the Parties shall hold those meetings which are identified in this Agreement, including Schedule B, and those which are requested by RCSI or First Data. At the request of the RCSI Relationship Executive, First Data shall prepare and circulate an agenda sufficiently in advance of each such meeting to give participants an opportunity to prepare for the meeting and shall incorporate into such agenda items that RCSI desires to discuss. At the request of the RCSI Relationship Executive, First Data shall prepare and circulate minutes promptly after a meeting. The meetings may include the following:

(i) a quarterly management meeting of the Steering Committee to review the Monthly Performance Reports for the quarter, review First Data’s overall performance under this Agreement, review the performance of the First Data System, review progress on the resolution of issues, provide a strategic outlook for RCSI in connection with the Production Services, and discuss such other matters as appropriate.

(ii) an annual senior management meeting by senior officers of the Parties to review relevant contract and performance issues, including (a) overall Service Levels performance, (b) quality improvement, (c) RCSI Customer satisfaction and (d) disaster recovery.

(iii) as requested by RCSI, meetings between RCSI key customers and First Data.

(iv) a bi-annual review between First Data’s parent company’s Chief Executive Officer (currently Michael Capellas) RCSI’s parent company’s Chief Executive Officer (currently Mark Begor).

(v) quarterly reviews of First Data’s parent company’s financial status with First Data Resource’s Chief Financial Officer (currently Heath Sampson) and GE Consumer Finance’s Chief Financial Officer (currently Brian Wenzel), along with, if requested by RCSI, financial officers of one or more RCSI program clients.

(vi) monthly meetings between the appropriate representatives from RCSI and First Data after receipt of the Monthly Performance Report to review the Defects and Defectives and agree upon appropriate Service Level Credits for the month.

(vii) on request by the RCSI Relationship Executive, First Data shall participate in a “Strategic Account Meeting” with the RCSI Service Interface Team (and any Affiliate that elects to attend) to discuss each Party’s plans and objectives for the next six (6) months, including (i) business direction and technology, (ii) resource management, (iii) capacity planning, (iv) quality improvement and (v) RCSI Customer satisfaction. First Data shall provide agreed upon data, which shall include Dashboards and other detailed reports to facilitate these meetings; and

(viii) on request by the RCSI Relationship Executive, First Data shall participate in a “Service Review Call” with the RCSI Service Interface Team to discuss matters related to the performance of the Production Services by First Data, including (A) compliance with the Service Levels, (B) reporting, (C) scheduling and (D) new client implementations.

 

 

PSA    18    RCSI / First Data Confidential


Final Execution Version

 

7.4 Procedures Manual.

(a) A procedures manual (the “Procedures Manual”) is to be established for the Production Services. First Data shall prepare and deliver a draft of the Procedures Manual to RCSI by the Effective Date. RCSI shall return the draft Procedures Manual to First Data within ninety (90) days of receipt following which the Parties shall collaborate and mutually agree upon which RCSI suggested changes should be incorporated into the initial Procedures Manual.

(b) The Procedures Manual shall describe how First Data will perform and deliver the Production Services under this Agreement, the equipment and software being used, and the documentation (e.g., operations manuals, user guides, specifications) which provide further details of such activities. The Procedures Manual shall describe the activities First Data proposes to undertake in order to provide the Production Services, including those direction, supervision, monitoring, staffing, reporting, planning and oversight activities normally undertaken at facilities that provide services of the type First Data shall provide under this Agreement. The Procedures Manual shall also document certain roles and responsibilities of RCSI and shall include descriptions of quality assurance procedures, First Data’s problem management and escalation procedures, and the other standards and procedures of First Data pertinent to RCSI’s interaction with First Data in obtaining the Production Services. The Procedures Manual shall also contain the process map for Statement production. The Procedures Manual shall be suitable for use by RCSI to understand the Production Services.

(c) First Data shall periodically update the Procedures Manual to reflect material changes in the operations or procedures described therein. Significant updates of the Procedures Manual shall be provided to RCSI for review and comment. If there is a conflict between the Procedures Manual and this Agreement this Agreement shall control.

7.5 Change Control Procedure.

(a) First Data shall comply with the following general requirements:

(i) Prior to using any new software or new equipment to provide the Production Services, First Data shall have verified that the item has been properly installed, is operating in accordance with its specifications, interfaces with RCSI properly, and is performing its intended functions in a reliable manner.

(ii) First Data shall not take an action or make a decision which may have a material effect on RCSI or the RCSI Affiliates or which adversely affects the function or performance of, or decreases the resource efficiency of, the Production Services, including implementing Changes in technology or equipment

 

 

PSA    19    RCSI / First Data Confidential


Final Execution Version

 

and software configuration, without first ***; provided however, that Changes in the production cycle shall be governed by Section 7.5(a)(iv) below. First Data may make temporary Changes required by an emergency if after making reasonable efforts it has been unable to contact an appropriate RCSI manager to ***. First Data shall document and promptly report such emergency Changes to the RCSI Relationship Executive. First Data shall, as requested by RCSI, provide support for Changes to the RCSI and RCSI Affiliate systems and procedures, if any, necessitated by Changes in the First Data Software or First Data System.

(iii) First Data shall, as requested by RCSI, support RCSI’s testing of Changes to the First Data System and RCSI’s testing of its information and processing systems and those of the RCSI Affiliates in connection with Changes which may affect such systems.

(iv) With respect to the addition of material new RCSI Volumes requested by RCSI for (A) existing RCSI Customers resulting from the acquisition of material new business volumes from third parties by such customers (rather than volume growth related to their existing business operations) or (B) persons who become RCSI Customers after the Effective Date into then-existing production cycles (the “Cycle Schedules”; and such Cycle Schedules as modified, adjusted or reloaded to accommodate such new RCSI Volumes shall be referred to as “New Cycle Schedules”), RCSI and First Data shall use commercially reasonable efforts to mutually agree on such New Cycle Schedules, including adding shifts, extending shift hours, the movement of the new RCSI Volumes to other First Data-operated production facilities so long as neither RCSI nor any RCSI Affiliate is prevented, either contractually (under agreements with RCSI Customers or otherwise) or under legal requirements, rules or regulations from approving the performance of the Production Services at, or having the Production Services performed at, other First Data-operated facilities.

(b) The Parties shall adhere to the following requirements regarding the Change Control Procedure:

(i) “Change” means any addition to, modification or removal of any aspect of the Production Services which is reasonably expected by First Data to have a more than insubstantial impact to RCSI or requires changes in one or more interfaces.

(ii) “Change Control Procedure” means the written procedure prepared by First Data under the Original Agreement and approved by RCSI (and updated from time to time) for considering, analyzing, approving and carrying out Changes designed to ensure that only desirable Changes are made and that Changes made by or on behalf of First Data are carried out in a controlled manner with minimal disruption to the Production Services and Service Recipients’ business operations.

(c) Exhibit A-4 to this Agreement describes the types of Changes that typically occur between the Parties as well as the types of documentation that typically accompany each Change type.

 

 

PSA    20    RCSI / First Data Confidential


Final Execution Version

 

7.6 Use of Subcontractors.

Subcontracting” means the delegation by First Data of any function(s) constituting a part of the Production Services, and “Subcontractor” means any third party (other than any First Data Majority Owned Affiliates who remain Majority Owned Affiliates) to whom First Data has subcontracted any function(s) constituting a part of the Production Services (including any Affiliate of a Subcontractor or other entity to whom a Subcontractor further subcontracts or otherwise sub-delegates any of its subcontracted duties or obligations). First Data may subcontract the performance of Production Services only in accordance with the following:

(a) First Data may, in the ordinary course of business, utilize third party services or products that are not dedicated to performance of Production Services for RCSI and that are not material to any particular function constituting a part of the Production Services. First Data may also engage individual independent contractors (either directly or through “staffing” companies) to supplement its employee workforce. Such arrangements shall not be deemed Subcontracting for the purposes of this Section. First Data will nevertheless be responsible for such parties.

(b) First Data may not use Subcontractors (including Affiliates of First Data) to perform any material portion of the Production Services without ***. First Data will be responsible to RCSI for all subcontractor services as if they were performed directly by First Data. RCSI may require First Data to replace any previously approved Subcontractor whose performance, in the reasonable judgment of RCSI, has been unacceptable.

(c) First Data shall have formal written contracts with all Subcontractors (including First Data’s Affiliates) and shall ensure that all confidentiality, regulatory, and similar obligations of First Data are contractually undertaken by each Subcontractor. First Data shall include in its subcontracts as flow-down provisions, provisions substantially similar to Section 5 (First Data Personnel), Section 8 (Audit), Section 12 (Safeguarding of Data; Confidentiality), Section 13.1 (Work Standards), Section 19.7 (Relationship of the Parties) of this Agreement, and any other provisions as necessary for First Data to fulfill its obligations under this Agreement. Even if there is no breach of the underlying obligation, a failure to obtain such obligation shall be a material breach of this Agreement, subject to the cure periods provided herein.

(d) All subcontracts shall be between First Data and the Subcontractor and will provide that the Subcontractor will look solely to First Data and not to RCSI, will waive all rights to make any claim against RCSI. As between RCSI and First Data, First Data shall remain responsible for obligations, services and functions performed by Subcontractors to the same extent as if such obligations, services and functions were performed by First Data employees, and for purposes of this Agreement such work shall be deemed work performed by First Data. First Data shall be RCSI’s sole point of contact regarding the Production Services, including with respect to payment. First Data shall not disclose RCSI Confidential Information to a Subcontractor unless and until such Subcontractor has agreed in writing to protect the confidentiality of such Confidential Information in a manner substantially equivalent to that required of First Data under this Agreement.

(e) First Data’s Subcontractors that have been *** as of the Effective Date are listed in Schedule F of this Agreement.

 

 

PSA    21    RCSI / First Data Confidential


Final Execution Version

 

7.7 Quality Assurance and Improvement Programs.

(a) First Data, as part of its total quality management process, shall provide continuous quality assurance and quality improvement through: (i) the identification and application of proven techniques and tools from other installations within its operations (i.e., “Best Practices”) that would benefit RCSI or the RCSI Affiliates either operationally or financially; and (ii) the implementation of concrete programs, practices and measures. Such procedures shall include checkpoint reviews, testing, acceptance and other procedures for RCSI and the RCSI Affiliates to assure the quality of First Data’s performance, and shall be included in the Procedures Manual.

(b) First Data will implement the following Six Sigma requirements:

(i) As of the Effective Date, as required by RCSI First Data shall have delivered Level 1, 2, 3, 4 and 5 process flows for all of its processes which affect the Basic Production Services for Statements and Letters, and Level 1, 2 and 3 process flows for all of its processes which affect the Basic Production Services for Embossing.

(ii) As of the Effective Date, First Data shall have implemented SIPOC, FEMA and PCS for each of the foregoing processes.

(iii) First Data shall show continuous improvement in all of its operations relating to or affecting the Production Services and will provide RCSI information sufficient to demonstrate such improvement.

(iv) The Production Services shall contribute toward the financial requirement set forth in Section 9.7(b)(v) of the TSA, which requirement shall be considered to be cumulative between this Agreement and the TSA. If the TSA is terminated or its term expires and this Agreement is still in effect, the amount due under Section 9.7(b)(v) of the TSA shall be deemed to be a separate and continuing obligation of First Data under this Agreement.

(v) As of the Effective Date, all First Data Personnel providing management services on First Data’s RCSI account shall have successfully completed RCSI’s Six Sigma Green Belt instruction at First Data’s expense and a number of First Data management personnel (as mutually agreed to by the Parties) shall complete RCSI’s Six Sigma Black Belt instruction.

(vi) A First Data employee has been identified and has been certified as a Master Black Belt.

7.8 Productivity and Management Tools.

First Data shall utilize project management tools, including productivity aids and project management systems, as reasonably necessary to perform the Production Services. First Data shall use project management tools in all major projects and employ a regular reporting mechanism to identify project tasks, present current status reports, and identify potential bottlenecks and problems.

 

 

PSA    22    RCSI / First Data Confidential


Final Execution Version

 

7.9 Restrictive Covenant.

(a) First Data agrees that during the Term, it will not ***

(b) Nothing in this Section 7.9 shall be construed to prohibit First Data or any First Data Affiliate, and they shall not be restricted from, ***

(c) In connection with Sections 7.9(a) and 7.9(b), First Data agrees that it shall ***

 

8. AUDITS

8.1 Audit Rights.

(a) First Data shall maintain a complete audit trail of financial and non-financial transactions resulting from this Agreement. First Data shall provide to RCSI, its Affiliates, auditors (including internal audit staff and external auditors), inspectors, regulators and other representatives (which representatives may include RCSI Customers) as RCSI may from time to time designate in writing, access at reasonable times to any facility or part of a facility from which either First Data or any of its Subcontractors is providing the Production Services and to data and records relating to the Production Services for the purpose of performing audits and inspections of either First Data or any of its Subcontractors to:

(i) verify the accuracy of charges and invoices, and the inventory of RCSI supplies and other RCSI assets, if any;

(ii) verify the integrity of RCSI Data and examine the systems that receive, process store, support and transmit that data and First Data’s compliance with the data privacy, data protection, and confidentiality provisions of this Agreement; and

(iii) examine First Data’s performance of the Production Services including, to the extent applicable to the Production Services performed by First Data and to the charges therefor, performing audits: (A) of practices and procedures, (B) of systems, (C) of general controls and security practices and procedures, (D) of disaster recovery and back-up procedures, (E) of the efficiency of First Data in performing the Production Services (but only to the extent affecting charges for, or timing of, Production Services hereunder), (F) as necessary to enable RCSI to meet applicable regulatory requirements, and (G) to verify First Data’s compliance with any other provisions of this Agreement.

(b) First Data shall provide to such auditors, inspectors, regulators, and representatives such assistance as they require, including, subject to First Data’s reasonable requirements designed to maintain the security of First Data Data, installing and operating audit software. First Data shall cooperate fully with RCSI or its designees in connection with audit functions and with regard to examinations by regulatory authorities. RCSI’s auditors and other representatives shall comply with First Data’s reasonable security requirements. With respect to RCSI-initiated general audits that are conducted on-site at First Data, RCSI shall give First Data reasonable prior notice of RCSI’s intent to audit and the notice shall include a description of the scope of the audit. If there are more than two (2) such RCSI-initiated general audits during any calendar year First Data may charge RCSI for its incremental cost thereof, and the period during which such audits will each be conducted on-site at First Data will not exceed ten (10) days. In the case of an RCSI audit respecting particular identified problems, RCSI will provide such notice, if any, as is appropriate under the circumstances.

 

 

PSA    23    RCSI / First Data Confidential


Final Execution Version

 

8.2 Audit Follow-up.

(a) Within fifteen (15) days following RCSI’s receipt of a report on the results of an audit or examination, to the extent possible, RCSI or its auditor shall provide First Data with a report of the audit or examination report’s findings that pertain to First Data. Following an audit or examination, RCSI may conduct (in the case of an internal audit), or request its external auditors or examiners or regulatory agencies to conduct, an exit conference with First Data to obtain factual concurrence with issues identified in the review. First Data promptly shall notify RCSI if any review or audit conducted by First Data, its Affiliates, or their contractors, agents or representatives (including internal and external auditors or a regulatory agency), reveals that a material failure to perform in accordance with this Agreement has occurred or may occur and shall provide RCSI with a copy of the applicable portions of the audit and shall advise RCSI of the status of remedial efforts being undertaken with respect to such failure or potential failure to perform.

(b) First Data and RCSI shall meet to review each audit report promptly after the issuance thereof and to mutually agree upon the appropriate manner, if any, in which to respond to the changes suggested by the audit report. RCSI and First Data shall develop operating procedures for the sharing of audit and regulatory findings and reports related to First Data’s operating practices and procedures produced by auditors or regulators of either Party; provided, however, that the sharing of audit information (i) must relate to an audit relevant and specific to the Production Services provided to RCSI, and (ii) will be subject to First Data’s confidentiality obligation to its other customers; and further provided, however, that First Data shall extend every reasonable effort to gain release of its confidentiality obligation to support these audit efforts.

(c) If an audit report indicates that a problem exists, then within ten (10) days following RCSI’s receipt of the report, the Parties will meet to review that problem and to agree mutually upon the appropriate manner, if any, in which to address the problem; provided, however, that the foregoing notwithstanding, if any audit or examination identifies a failure by First Data or any First Data Subcontractor to comply with any relevant law, rule, ordinance, code or other obligation in performing the Production Services or to comply with this Agreement, which noncompliance creates the risk that RCSI or any RCSI Affiliate is violating or will be deemed to violate any requirement of law or any contractual obligation, First Data shall, (i) immediately upon the earlier of discovering or being notified of such failure cease and cure such failure, (ii) not more than ten (10) days following the earlier of discovering or being notified of such failure develop a plan for ensuring that such failure does not reoccur, which plan is acceptable to RCSI, and (iii) implement such plan not more than thirty (30) days after the earlier of discovering or being notified of such failure.

(d) If an audit shows that First Data has overcharged RCSI, First Data will be obligated, at RCSI’s option, to credit to RCSI’s account an amount equal to the amount of the overcharge plus interest at the Default Rate calculated from the date the overcharge was paid by RCSI to First Data, or to pay the amount to RCSI

 

 

PSA    24    RCSI / First Data Confidential


Final Execution Version

 

directly. If an audit shows that First Data overcharged RCSI on any invoice by more than *** Dollars *** of the correct amount of the invoice, then First Data will also pay RCSI for the cost of the audit.

8.3 Annual Audit.

First Data will conduct its own audits pertaining to the Production Services consistent with the audit practices of well-managed companies that perform services similar to the Production Services. Each year of the Term, upon RCSI’s written request First Data will provide no more often than annually: (i) a Statement of Auditing Standards No. 70, Type II review (“SAS 70”)(or the relevant successor statement adopted by the American Institute of Certified Public Accountants) of the facilities from where the Production Services are performed, (ii) written evidence of the Payment Card Industry (PCI) Data Security Standard (DSS) certification, and (iii) the BITS FISAP SIG as a means of demonstrating compliance with the financial institution-service provider industry standard questionnaire. Additionally, or as part of the SAS 70 Type II audit, if necessary for RCSI’s compliance with Section 404 of the Sarbanes-Oxley Act of 2002 First Data shall provide the necessary certification to verify that the Production Services are performed in compliance with the provisions of the Sarbanes-Oxley Act of 2002. First Data will provide RCSI with a summary of the results of all First Data audits relating to the Production Services. If a First Data audit indicates an adverse impact to RCSI Data, or to RCSI or other Service Recipients, or any violation of this Agreement, First Data will immediately notify RCSI, providing pertinent details so that RCSI can take steps to avoid or minimize the adverse impacts. First Data will also correct the errors or problems as soon as reasonably possible.

8.4 Record Keeping and Record Retention.

(a) First Data will maintain complete and accurate records of, and supporting documentation for, the amounts billable to and payments made by RCSI under this Agreement. First Data agrees to provide RCSI with documentation and other information with respect to each invoice as may be reasonably requested by RCSI to verify accuracy and compliance with the provisions of this Agreement.

(b) In support of RCSI’s Audit rights, First Data will keep and maintain records pertaining to First Data’s compliance with the Service Levels, including root cause analyses, and such other operational records pertaining to performance of the Production Services, in each instance as First Data keeps in the ordinary course of its business.

(c) Until (i) no longer required to meet RCSI’s records retention policy (as that policy may be adjusted from time to time); or (ii) all pending matters relating to this Agreement (including disputes) are closed; but (iii) no later than the date three (3) years after the date of expiration or termination of this Agreement unless otherwise required by law, First Data will maintain and provide access upon request to the records, documents and other information required to meet RCSI’s requirements and audit rights under this Agreement.

 

 

PSA    25    RCSI / First Data Confidential


Final Execution Version

 

8.5 Scope of Audits.

Notwithstanding anything to the contrary herein, the various audit rights described in this Agreement shall be limited to items and events occurring up to three (3) years prior to the date of the subject audit, provided, however, that audits requested by or in response to legal proceedings or requests, or to inquiries or directives by governmental or regulatory agencies shall not be subject to such three (3) year limitation period.

8.6 Confidentiality of Audits

All Audit results and disclosed records will be treated as First Data Confidential Information (except to the extent they contain RCSI Confidential Information or fall within an exception in Section 12.5(e)) and shall not be used for any purpose except to verify First Data’s compliance with its obligations under this Agreement and except that such results and records may be disclosed to regulators in accordance with Section 12.5(e).

8.7 Financial Reports

At RCSI’s request, First Data will provide to RCSI copies of all publicly-available audited and unaudited financial statements of First Data and its Affiliates.

 

9. RCSI RESPONSIBILITIES

9.1 Responsibilities.

In addition to RCSI’s responsibilities as expressly set forth elsewhere in this Agreement, RCSI shall be responsible for the following:

(a) RCSI shall designate one individual from time to time, to whom all First Data communications concerning this Agreement may be addressed (the “RCSI Relationship Executive”). As of the Effective Date the RCSI Relationship Executive is Julie Stansbury.

(b) RCSI shall cooperate with First Data by, among other things, making available, as reasonably requested by First Data, management decisions, information, approvals and acceptances so that First Data may accomplish its obligations and responsibilities hereunder. The RCSI Relationship Executive or his or her designee will be the principal point of contact for obtaining such decisions, information, approvals and acceptances.

9.2 Savings Clause.

*** First Data’s nonperformance of its obligations under this Agreement shall be excused if and to the extent (a) such First Data nonperformance results from RCSI’s failure to perform its responsibilities set forth in this Agreement or if RCSI fails to perform its obligations (as such obligations are set forth in the Procedures Manual) to transfer or provide to the First Data System data at such frequency as reasonably required to perform First Data’s obligations under this Agreement, and (b) First Data provides RCSI with reasonable notice of such non-performance and uses commercially reasonable efforts to perform notwithstanding RCSI’s failure to perform (with RCSI reimbursing First Data for its additional out-of-pocket expenses for such efforts).

 

 

PSA    26    RCSI / First Data Confidential


Final Execution Version

 

10. CHARGES

10.1 General.

All charges for the Production Services are set forth in this Section 10 and in Schedule C hereto. RCSI shall not be required to pay First Data any amounts for the Production Services in addition to those payable to First Data under this Section 10 or Schedule C hereto. For the avoidance of any doubt or confusion, the charges set forth in the TSA for the Services (as defined in the TSA), including any charges relating to print and mail or embossing services or functions, do not apply to the Production Services hereunder.

10.2 Pass-Through Expenses.

(a) Pass-Through Expenses are charges to be paid directly by RCSI or by RCSI through First Data. All Pass-Through Expenses are listed in Exhibit C-3 hereto. If the Parties agree that a particular Pass-Through Expense is to be paid by RCSI directly, First Data shall promptly provide RCSI with the original third-party invoice for such expense together with a statement that First Data has reviewed the invoiced charges and made a determination of which charges are proper and valid and should be paid by RCSI. Otherwise, First Data shall act as payment agent for RCSI and shall pay third-party charges comprising the Pass-Through Expense. Prior to making any such payment, however, First Data shall review the invoiced charges to determine whether such charges are proper and valid and should be paid. Upon request and subject to First Data’s confidentiality requirements with its suppliers, First Data shall provide RCSI with a reasonable opportunity to review the invoice to confirm First Data’s determination. Following such review by First Data and RCSI, First Data shall pay the amounts due and shall invoice RCSI for such charges.

(b) First Data shall use commercially reasonable efforts to ***. With respect to services or materials paid for on a Pass-Through Expenses basis, RCSI reserves the right to: (i) obtain such services or materials ***; (ii) *** for such services or materials; (iii) *** First Data shall obtain, provided that if First Data demonstrates to RCSI that such designation will have an adverse impact on First Data’s ability to meet the Service Levels, such designation shall be ***; (iv) require First Data *** share the results thereof with RCSI; and (v) review and approve the Pass-Through Expense for such services or materials ***.

10.3 Incidental Expenses.

First Data acknowledges that, except as may be otherwise provided in this Agreement, expenses that First Data expects to incur in performing the Production Services (including travel and lodging, document reproduction and administrative correspondence shipping, and long-distance telephone) are included in First Data’s charges and rates set forth in this Agreement. Accordingly, such First Data expenses are not separately reimbursable by RCSI unless, on a case-by-case basis for unusual expenses, RCSI has agreed in advance and in writing to reimburse First Data for the expense. RCSI acknowledges that it will be responsible for its own incidental expenses (including travel and lodging, document reproduction and administrative correspondence shipping, and long-distance telephone).

 

 

PSA    27    RCSI / First Data Confidential


Final Execution Version

 

10.4 Taxes.

The Parties’ respective responsibilities for taxes arising under or in connection with this Agreement shall be as follows:

(a) Each Party shall be responsible for any personal property taxes on property it owns or leases, for franchise and privilege taxes on its business, and for taxes based on its net income or gross receipts.

(b) First Data shall be responsible for any sales, use, excise, gross receipts, value-added, services, consumption, and other taxes and duties payable by First Data on any goods or services used or consumed by First Data in providing the Production Services where the tax is imposed on First Data’s acquisition or use of such goods or services and the amount of tax is measured by First Data’s costs in acquiring such goods or services.

(c) RCSI shall be responsible for any sales, use, excise, gross receipts, value-added, services, consumption, or other tax existing as of the Effective Date that is assessed on the provision of the Production Services as a whole, or on any particular Production Services received by RCSI from First Data. RCSI will be responsible for any sales, use, excise, gross receipts, value-added, services, consumption, or other tax becoming applicable during the Term (or that is increased during the Term) that is assessed on the provision of the Production Services as a whole, or on any particular service received by RCSI from First Data.

(d) Notwithstanding anything to the contrary, the charges to RCSI shall not include any component related to applicable sales taxes regarding (i) plastic materials for Transaction Cards used by First Data in providing the Production Services or (ii) the Production Services (including sorting services and envelope inserting services) provided by First Data so long as applicable resale certificates are provided to First Data by RCSI. However, First Data may include in the charges to RCSI a component to reimburse First Data for any applicable sales tax paid by First Data with respect to Statements and other printed materials used by First Data in providing the Production Services (other than plastic materials for Transaction Cards).

(e) If a sales, use, excise, gross receipts, value-added, services, consumption, or other tax is assessed on the provision of any of the Production Services, the Parties shall work together to segregate the payments under this Agreement into three (3) payment streams:

(i) those for taxable Production Services;

(ii) those in which First Data functions merely as a payment agent for RCSI in receiving goods, supplies, or services (including leasing and licensing arrangements); and

(iii) those for other nontaxable Production Services.

(f) The Parties agree to cooperate with each other to enable each to more accurately determine its own tax liability and to minimize such liability to the extent legally permissible. First Data’s invoices shall separately state the amounts of any taxes First Data is collecting from RCSI. The various charges for the Production

 

 

PSA    28    RCSI / First Data Confidential


Final Execution Version

 

Services provided by First Data are set forth in Schedule C. Each Party shall provide and make available to the other any resale or direct pay certificates, information regarding out-of-state or out-of-country sales or use of equipment, materials or Production Services, other exemption certificates, power of attorney or other necessary authorizations or information reasonably requested by the other Party.

(g) First Data shall promptly notify RCSI of, and coordinate with RCSI the response to, any claim for taxes asserted by applicable taxing authorities for which RCSI is responsible hereunder. RCSI shall, at its option and expense (including, if required by a taxing authority, pay such tax, interest or penalty prior to final resolution of the issue) have the right to request (which request shall not be denied, delayed, subject to any conditions, or withheld by First Data) to seek administrative relief, a ruling, judicial review (original or appellate level) or other appropriate review (hereinafter referred to as “Proceeding(s)”) (in a manner deemed appropriate by RCSI), as to the applicability of any tax, interest or penalty, or to protest any assessment and participate with First Data in any legal challenge to such assessment, but RCSI shall be liable hereunder for any such amount ultimately determined to be due. Notwithstanding the above, such indemnity is conditioned upon First Data providing RCSI timely notification within ten (10) Business Days of receiving any proposed assessment of any such additional taxes, interest or penalty due, and First Data shall provide RCSI with the necessary authority or powers to provide RCSI with the opportunity to participate in such Proceeding(s) or other appropriate review as to the applicability of any such taxes prior to any assessment of additional taxes; provided, however, that First Data’s failure to provide timely notice shall not affect the indemnity hereunder to the extent such failure does not actually prejudice RCSI. First Data shall, when requested by RCSI and at RCSI’s expense, cooperate with and/or allow RCSI to participate with First Data in any such Proceeding, protest or legal challenge related to matters for which RCSI is responsible. In any proceeding which involves issues affecting only RCSI or RCSI and other First Data customers, First Data shall make reasonable efforts to sever the issues relating to RCSI from all other issues raised in the Proceeding, so that RCSI may control the portion of the Proceeding relating to RCSI, and First Data may control the portion of the Proceeding relating to those issues that do not relate to RCSI; provided, however, that if First Data is unable to sever the issues in a Proceeding, First Data shall control the Proceeding, but shall give RCSI the right to participate in any Proceeding(s). Notwithstanding the above, RCSI’s participation in any Proceeding shall not prohibit or inhibit First Data from concluding or resolving matters related to First Data or First Data’s other clients, provided, however, that First Data shall not pay any claimed liability or settle any Proceeding unless RCSI has consented in writing to such payment or settlement (which consent shall not be unreasonably withheld).

(h) RCSI shall be entitled to any tax refunds or rebates granted to the extent such refunds or rebates are of taxes that were paid by RCSI.

 

 

PSA    29    RCSI / First Data Confidential


Final Execution Version

 

11. INVOICING AND PAYMENT

11.1 Invoicing.

(a) First Data shall invoice RCSI on a monthly basis in arrears for all amounts due under this Agreement at its address in Utah, with a copy to Manager of Finance of RCSI, 485 Lake Mirror Road, Bldg 700, College Park, Georgia 30349. First Data will provide RCSI with on line access to all necessary information in order for RCSI to validate the charges, and a monthly paper invoice will follow. The invoice shall show details as to charges as reasonably specified by RCSI. First Data shall include the calculations utilized to establish the charges in sufficient detail to enable RCSI to confirm the accuracy of the charges included in the invoice.

(b) To the extent a credit may be due RCSI pursuant to this Agreement, First Data shall provide RCSI with an appropriate credit against amounts then due and owing; if no further payments are due to First Data, First Data shall pay such amounts to RCSI within thirty (30) days.

(c) First Data shall render a single consolidated invoice for each month’s charges, showing such details as reasonably specified by RCSI, including as necessary to satisfy RCSI’s internal accounting and chargeback requirements (such as service components, projects, locations, and departments). Such invoice shall separately state the amounts of any taxes First Data is collecting from RCSI. The invoice shall state for each item or service charged the clause in Schedule C authorizing First Data to charge for such item or service.

(d) If First Data discovers that an invoice failed to include any amounts which were properly billable to RCSI, First Data will identify those amounts in detail and will explain the reason for the omission at the time of the appropriate invoice. First Data waives, and RCSI shall not be responsible for, any amount that is invoiced later than one hundred and eighty (180) days after RCSI’s receipt of the related invoice.

(e) If First Data incorrectly charges RCSI for Monthly Charges or Pass-Through Expenses two times in a twelve (12) month period in an amount in excess of *** of the aggregate amount of Monthly Charges and Pass-Through Expenses for such months, First Data shall, within thirty (30) days of RCSI’s notice to First Data of such fact, *** in the months for which the invoices containing the incorrect charges are made.

11.2 Payment Due.

Subject to the other provisions of this Section 11, invoices provided for under Section 11.1 and properly submitted to RCSI pursuant to this Agreement shall be due and payable by RCSI within *** days after receipt thereof. Any amount due under this Agreement for which a time for payment is not otherwise specified shall be due and payable within *** days after receipt of a proper invoice for such amount. RCSI shall pay amounts due from it to First Data electronically.

11.3 Accountability.

First Data shall maintain complete and accurate records of, and supporting documentation for, the amounts billable to and payments made by RCSI hereunder,

 

 

PSA    30    RCSI / First Data Confidential


Final Execution Version

 

in accordance with generally accepted accounting principles applied on a consistent basis. First Data agrees to provide RCSI with documentation and other information with respect to each invoice as may be reasonably requested by RCSI to verify accuracy and compliance with the provisions of this Agreement. RCSI and its authorized agents and representatives shall have access to such records for purposes of audit during normal business hours during the Term and during the period for which First Data is required to maintain such records.

11.4 Proration.

Periodic charges under this Agreement are to be computed on a calendar month basis, and shall be prorated for any partial month.

11.5 Refundable Items.

(a) Prepaid Amounts. Where RCSI has prepaid for a service or function for which First Data is assuming financial responsibility under this Agreement, First Data shall refund to RCSI, upon either Party identifying the prepayment, that portion of such prepaid expense which is attributable to periods on and after the Effective Date.

(b) Refunds and Credits. If First Data should receive a refund, credit or other rebate for goods or services previously paid for by RCSI, First Data shall promptly notify RCSI of such refund, credit or rebate and shall promptly pay the full amount of such refund, credit or rebate, as the case may be to RCSI. Unless previously paid to RCSI, First Data will reflect any refund, credit or rebate as a reduction of the amounts payable to First Data in the next invoice delivered to RCSI under this Agreement. If no further payments are due to First Data under this Agreement, First Data shall pay such amounts to RCSI within thirty (30) days of RCSI’s request therefor.

11.6 Deduction.

With respect to an amount to be paid by RCSI hereunder, RCSI may deduct from that amount any amount that First Data is obligated to pay or credit to RCSI.

11.7 Disputed Charges.

Subject to Section 11.6, RCSI shall pay undisputed charges when such payments are due under this Section 11 and Schedule C. RCSI may withhold payment of particular charges that RCSI disputes in good faith. RCSI agrees to notify First Data within one hundred eighty (180) days of and to use best efforts to resolve in a timely manner, any material disputed charges.

 

12. SAFEGUARDING OF DATA; CONFIDENTIALITY

12.1 RCSI Information.

(a) RCSI Information shall be and remain the property of RCSI. First Data shall not assert any lien or other right against or to RCSI Information. No RCSI Information, or any part thereof, shall be sold, assigned, leased, or otherwise disposed of to third parties by First Data or commercially exploited by or on behalf of First Data, its employees or agents.

 

 

PSA    31    RCSI / First Data Confidential


Final Execution Version

 

(b) Upon any of (i) RCSI’s request, (ii) the expiration of this Agreement, or (iii) the termination of this Agreement for any reason (including termination for cause) or, with respect to any particular data, on such earlier date that the same shall be no longer required by First Data in order to render the Production Services hereunder, such RCSI Information (including copies thereof in the possession or under the control of First Data, except as necessary to comply with regulatory requirements applicable to First Data) shall be promptly returned to RCSI by First Data in a form reasonably requested by RCSI or, if RCSI so elects, shall be destroyed.

(c) RCSI Information shall not be utilized by First Data for any purpose other than that of rendering the Production Services under this Agreement.

12.2 Safeguarding RCSI Data.

(a) First Data shall establish and maintain safeguards against the destruction, loss, or alteration of RCSI Data in its possession which are no less rigorous than the most stringent safeguards maintained by First Data for its other customers of services similar to the Production Services. RCSI shall have the right to establish backup security for data and to keep backup data and data files in its possession if it chooses.

(b) Without limiting the generality of Section 12.2(a) above:

(i) First Data Personnel shall not attempt to access, or allow access to, any RCSI Data or RCSI Information which is not required for performance of the Production Services by First Data Personnel. If such access is attained, First Data shall use best efforts to promptly report such incident to RCSI, describe in detail any accessed materials, and return to RCSI any copied or removed materials.

(ii) First Data shall institute industry *** systems security, backup and disaster recovery measures to guard against the unauthorized access, alteration, destruction or loss of RCSI Data. Such measures shall include the installation of software which: (A) requires all users to enter a user identification number and password prior to gaining access to the information systems; (B) controls and tracks the addition and deletion of users; (C) controls user access to areas and features of the systems; and (D) requires passwords to be changed periodically and under specified circumstances.

(c) First Data will be responsible for the security of all RCSI customized inventory, including plastics, in its possession or under its control.

12.3 First Data Information.

(a) First Data Information shall be and remain the property of First Data. RCSI shall not assert any lien or other right against or to First Data Information. No First Data Information, or any part thereof, shall be sold, assigned, leased, or otherwise disposed of to third parties by RCSI or commercially exploited by or on behalf of RCSI, its employees or agents.

(b) Upon any of (i) the expiration of this Agreement (ii) the termination of this Agreement for any reason (including termination for cause), or (iii) with respect

 

 

PSA    32    RCSI / First Data Confidential


Final Execution Version

 

to any particular data, on such earlier date that the same shall be no longer required by RCSI in order to receive and use the Production Services hereunder, but subject in all cases to the provisions of Section 18.6, such First Data Information (including copies thereof in the possession or under the control of RCSI, except as necessary to comply with regulatory requirements applicable to RCSI) shall be promptly returned to First Data by RCSI in a form reasonably requested by First Data or, if First Data so elects, shall be destroyed.

(c) First Data Information shall not be utilized by RCSI for any purpose other than that of receiving and using the Production Services under this Agreement.

12.4 Safeguarding First Data Data.

(a) RCSI shall establish and maintain safeguards against the destruction, loss, or alteration of First Data Data in its possession which are no less rigorous than those maintained by RCSI for its own information of a similar nature. First Data shall have the right to establish backup security for data and to keep backup data and data files in its possession if it chooses.

(b) Without limiting the generality of Section 12.4(a) above, RCSI employees shall not attempt to access, or allow access to, any First Data Data or First Data Information which is not required for receiving or using the Production Services. If such access is attained, RCSI shall use best efforts to promptly report such incident to First Data, describe in detail any accessed materials, and return to First Data any copied or removed materials.

12.5 Confidentiality.

(a) Confidential Information. First Data and RCSI each acknowledge that they may be furnished with, receive, or otherwise have access to information of or concerning the other Party which such Party considers to be confidential, proprietary, a trade secret or otherwise restricted. “Confidential Information” of a Party means any non-public, commercially proprietary or sensitive information (or materials) belonging to, concerning or in the possession or control of the Party or its Affiliates (the “Furnishing Party”) that is furnished, disclosed or otherwise made available to the other Party (the “Receiving Party”) (or entities or persons acting on the other Party’s behalf) in connection with this Agreement and which is either marked or identified in writing as confidential, proprietary, secret or with another designation sufficient to give notice of its sensitive nature, or is of a type that a reasonable person would recognize it to be commercially sensitive. Without limiting the foregoing, the terms and conditions of this Agreement shall be deemed Confidential Information.

(b) RCSI Confidential Information. Without limiting Section 12.5(a), in the case of RCSI, Confidential Information shall include, whether or not designated “Confidential Information”, (i) all specifications, designs, documents, correspondence, software, documentation, data and other materials and work products produced by RCSI or its agents or representatives, (ii) all information concerning the operations, affairs and businesses of RCSI (including ideas, marketing plans, business strategies, data and other information that are trade secrets or are competitively sensitive), the financial affairs of RCSI, and the relations

 

 

PSA    33    RCSI / First Data Confidential


Final Execution Version

 

of RCSI with its customers, employees and service providers (including customer lists, customer information, account information, transaction information, and consumer markets); (iii) software provided to First Data by or through RCSI; (iv) information about, regarding or provided by a RCSI customer; and (v) other information or data concerning RCSI and its businesses or customers stored on magnetic media or otherwise or communicated orally, and obtained, received, transmitted, processed, stored, archived or maintained by First Data under this Agreement (collectively, the “RCSI Confidential Information”).

(c) First Data Confidential Information. Without limiting Section 12.5(a), in the case of First Data, Confidential Information shall include, whether or not designated “Confidential Information”, (i) all User Manuals, specifications, designs, documents, correspondence, software, software documentation, the First Data System, First Data Equipment, and data and other materials and work products owned or produced by First Data in the course of performing the Production Services located therein or thereon (other than software, documentation and other materials which the Parties agree or have agreed is owned by RCSI or an RCSI Affiliate); (ii) all information concerning the operations, affairs and businesses of First Data (including ideas, marketing plans, business strategies, data and other information that are trade secrets or are competitively sensitive), the financial affairs of First Data, and the relations of First Data with its other customers, employees and service providers (including customer lists, customer information, account information and consumer markets); (iii) software provided to RCSI by or through First Data, and (iv) other information or data concerning First Data and its businesses or other customers stored on magnetic media or otherwise or communicated orally, and obtained, received, transmitted, processed, stored, archived, or maintained by First Data under this Agreement (collectively, the “First Data Confidential Information”).

(d) Obligations.

(i) Each Party’s Confidential Information shall remain the property of that Party except as expressly provided otherwise by the other provisions of this Agreement. RCSI and First Data shall each use at least the same degree of care to prevent disclosing to third parties the Confidential Information of the other as it employs to avoid unauthorized disclosure, publication or dissemination of its own information of a similar nature (but at least a reasonable degree of care); provided that the Parties may disclose such information to an employee, officer, director, agents, representative, external or internal auditors and independent contractors of the Party or of an Affiliate of the Party requiring access to the same in the course of his or her employment or his, her or its engagement. Furthermore, the Parties may disclose such information to entities performing services required hereunder where (A) use of such entity is authorized under this Agreement, (B) such disclosure is necessary or otherwise naturally occurs in that entity’s scope of responsibility, and (C) the entity agrees in writing to assume the obligations described in this Section 12.5. Any disclosure to the entities and individuals referenced in this Section 12.5(d) shall be under the terms and conditions as provided herein.

(ii) As requested by a Party during the Term but, in the case of First Data Information, except as required by RCSI and the RCSI Affiliates in order

 

 

PSA    34    RCSI / First Data Confidential


Final Execution Version

 

to receive and use the Production Services, and upon expiration or any termination of this Agreement and completion of the other Party’s obligations under this Agreement, such other Party shall return or destroy, as the requesting Party may direct, all material in any medium that contains, refers to, or relates to the requesting Party’s Confidential Information. Neither Party shall retain copies of the other Party’s Confidential Information (except as may be necessary to comply with regulatory requirements applicable to the retaining Party).

(iii) Each Party shall take reasonable steps to ensure that its employees comply with these confidentiality provisions.

(iv) Neither Party shall alter or remove any identification, copyright or proprietary rights notice which indicates the ownership of any part of the other Party’s Confidential Information.

(e) Exclusions. This Section 12.5 shall not apply to any particular information which First Data or RCSI can demonstrate (i) was, at the time of disclosure to it, in the public knowledge; (ii) after disclosure to it, is published or otherwise becomes part of the public knowledge through no fault of the receiving Party; (iii) was received from a third party who had a lawful right to disclose such information to it without any obligation to restrict its further use or disclosure; or (iv) was independently developed by the receiving Party without reference to Confidential Information of the furnishing Party. In addition, a Party shall not be considered to have breached its obligations by disclosing Confidential Information of the other Party as required to satisfy any legal requirement of a competent government body, provided that, immediately upon receiving any such request and to the extent that it may legally do so, such Party advises the other Party promptly and prior to making such disclosure in order that the other Party may interpose an objection to such disclosure, take action to assure confidential handling of the Confidential Information, or take such other action as it deems appropriate to protect the Confidential Information, including that the Furnishing Party may seek a protective order or other appropriate remedy. If a protective order or similar order is not obtained by the date by which the Receiving Party must comply with the request, the Receiving Party may furnish that portion of the Confidential Information that it determines it is legally required to furnish.

(f) Loss of Confidential Information. In the event of any disclosure or loss of, or inability to account for, any Confidential Information of the furnishing Party, the receiving Party shall promptly, at its own expense: (i) notify the furnishing Party in writing; (ii) take such actions as may be necessary or reasonably requested by the furnishing Party to minimize the violation or the damage resulting therefrom; and (iii) cooperate in all reasonable respects with the furnishing Party to minimize the violation and any damage resulting therefrom.

(g) No Implied Rights. Except as otherwise specifically provided in this Agreement, nothing in this Section 12.5 shall be construed as obligating a Party to disclose its Confidential Information to the other Party, or as granting to or conferring on a Party, expressly or implied, any rights or license to the Confidential Information of the other Party.

 

 

PSA    35    RCSI / First Data Confidential


Final Execution Version

 

(h) Release of Information. Notwithstanding the foregoing, RCSI agrees that RCSI Confidential Information may be made available to supervisory or regulatory authorities of RCSI or of First Data upon the written request of any of the foregoing; provided, however, upon receipt of the request and prior to making the information available, First Data shall provide notice to RCSI of such request and shall provide RCSI a reasonable period of time in which RCSI may object to such disclosure, including obtaining suitable equitable protection.

12.6 Return or Destruction.

As requested by the Furnishing Party during the Term, the Receiving Party will return or provide the Furnishing Party a copy of any designated Confidential Information of the Furnishing Party. When Confidential Information of the Furnishing Party is no longer required for the Receiving Party’s performance under this Agreement, or in any event upon expiration or termination of this Agreement, the Receiving Party will return all materials in any medium that contain Confidential Information of the Furnishing Party or, at the Furnishing Party’s election, destroy them. At the Furnishing Party’s request, the Receiving Party will certify in writing that it has returned or destroyed all copies of the Furnishing Party’s Confidential Information in the possession or control of the Receiving Party’s or any of its Affiliates or contractors.

12.7 Provisions for Data Compliance.

(a) In addition to and not in limitation of First Data’s other obligations of confidentiality and non-disclosure under this Agreement, (i) First Data will implement appropriate administrative, technical, and physical safeguards and other appropriate measures to protect the security, confidentiality and integrity of Non-Public Personal information relating to customers of RCSI and its Affiliates and, to the extent relative to the Gramm-Leach-Bliley Act (“GLB Act”), other RCSI Information received by First Data from RCSI and its Affiliates, all as may be appropriate to meet the objectives of the GLB Act, including its implementing regulations promulgated thereunder and the guidelines issued pursuant to § 501 of the GLB Act, and (ii) First Data shall not use any Non-Public Personal Information relating to RCSI Customers received from RCSI or its Affiliates or obtained as a result of Production Services performed for RCSI (“RCSI Customer Information”) except as necessary in the ordinary course of business to perform Production Services hereunder or as authorized in writing by RCSI. First Data will ensure that any such third party to whom RCSI authorizes First Data to transfer or provide access to RCSI Customer Information (other than those to whom RCSI has instructed First Data to transfer or provide access, who should be RCSI’s responsibility):

(i) signs a written agreement to restrict its use of RCSI Customer Information to the use specified in the agreement between the First Data and the third party (which use must be in conjunction with First Data’s performance of its obligations hereunder);

(ii) agrees to restrict disclosure of Non-Public Personal Information of RCSI and its Affiliates as provided in this Section; and

(iii) agrees to implement and maintain appropriate administrative technical and physical safeguards to protect the security, confidentiality and integrity of all RCSI Customer Information as provided herein.

 

 

PSA    36    RCSI / First Data Confidential


Final Execution Version

 

(b) First Data will be responsible for the acts or omissions of any third party to whom it transfers or provides access to RCSI Customer Information hereunder, other than a third party whom RCSI or its Affiliates has instructed First Data to make such disclosure.

(c) “Non-Public Personal Information” means information as defined in the GLB Act, including (i) an individual’s name, address, e-mail address, IP address, telephone number and/or social security number; (ii) the fact that an individual has a relationship with RCSI or any of its Affiliates; and (iii) an individual’s or RCSI Customer’s account information.

12.8 Security Assessment/Due Diligence.

First Data shall cooperate with RCSI’s due diligence and security assessment process as it relates to the Production Services. If RCSI finds deficiencies as a result of this assessment process RCSI may advise First Data of its findings and may request changes to First Data’s processes, facilities, systems or procedures which RCSI reasonably believes will remedy the deficiencies. Final remediation actions will be mutually agreed upon by First Data and RCSI.

12.9 Survival.

The obligations under this Section 12 will survive the expiration or termination of this Agreement.

 

13. REPRESENTATIONS AND WARRANTIES

13.1 Work Standards.

Unless expressly addressed in another provision of this Agreement (such as being subject to a specific performance standard), First Data represents and warrants that the Production Services shall be rendered with promptness and diligence and shall be executed in a workman-like manner, in accordance with the practices and high professional standards used in well-managed operations performing services similar to the Production Services. First Data represents and warrants that it shall use adequate numbers of qualified individuals with suitable training, education, experience, and skill to perform the Production Services.

13.2 Maintenance.

First Data represents and warrants that it shall maintain the First Data System, and the First Data Equipment so that they operate in accordance with their specifications, including (a) maintaining such equipment in good operating condition, subject to normal wear and tear, (b) undertaking repairs and preventive maintenance on such equipment in accordance with the applicable equipment manufacturer’s recommendations, and (c) performing software maintenance in accordance with the applicable documentation, recommendations and specifications.

 

 

PSA    37    RCSI / First Data Confidential


Final Execution Version

 

13.3 Efficiency and Cost Effectiveness.

First Data represents and warrants that it shall use efficiently the resources or services necessary to provide the Production Services. First Data represents and warrants that it shall perform the Production Services in a reasonably cost-effective manner consistent with the required level of quality and performance.

13.4 Technology.

First Data represents and warrants that it shall provide the Production Services using, consistent with the Change Control Procedure, proven, current technology that will enable RCSI to take advantage of ***.

13.5 Non-Infringement.

First Data represents and warrants that it shall ***

13.6 Ownership and Use of Software and Related Materials.

First Data represents and warrants that ***

13.7 Absence of Litigation.

First Data represents and warrants that there is no claim, or any litigation, proceeding, arbitration, investigation or material controversy pending to which First Data or any of First Data’s Affiliates, agents, or representatives is a party, relating to the provision of the services offered by First Data, including the Production Services, or which would have a material adverse effect on First Data’s ability to enter into this Agreement and perform its obligations hereunder and, to the best of First Data’s knowledge, no such claim, litigation, proceeding, arbitration, investigation, or material controversy has been threatened or is contemplated. First Data shall promptly notify RCSI in writing if it receives written notice of any claim, litigation, proceeding, arbitration, investigation or material controversy to which First Data or any of its Affiliates, representatives or agents is a party, that, if adversely determined, would have a material and adverse effect on RCSI or any of its Affiliates, on any of the Production Services or on First Data’s ability to perform any of its obligations under this Agreement.

13.8 Inducements.

First Data represents and warrants to RCSI that it has not knowingly violated any applicable laws or regulations or any RCSI policies of which First Data has been given notice regarding the offering of unlawful inducements in connection with this Agreement. If at any time during the Term, RCSI determines that the foregoing warranty is inaccurate, then, in addition to any other rights RCSI may have at law or in equity, RCSI shall have the right to terminate this Agreement for cause without affording First Data an opportunity to cure.

13.9 Viruses.

First Data represents and warrants that it will ensure that no Viruses are coded or introduced into the First Data System or into the RCSI or RCSI Affiliate information environments through the First Data System or the Production Services. If (a) a Virus which has adversely affected, or could adversely affect, the Production Services or the RCSI Data in the possession or under the control of First

 

 

PSA    38    RCSI / First Data Confidential


Final Execution Version

 

Data, is found to have been introduced into the First Data System or (b) a Virus has been introduced into the RCSI or RCSI Affiliate information environment through the First Data System or the Production Services, First Data promptly will (i) notify RCSI of the introduction and the extent of any known damage to the RCSI Data, (ii) if the Virus is in the First Data System, eradicate the Virus, repair any damage to the RCSI Data and eliminate any adverse effect on the Production Services resulting from the Virus or the eradication thereof, and (iii) if the Virus has been introduced into the RCSI or RCSI Affiliate information environment through the First Data System or the Production Services, assist RCSI and the RCSI Affiliate in eradicating the Virus and reducing the effects of the Virus and, if the Virus causes a loss of operational efficiency or loss of data, assist RCSI and the RCSI Affiliate to mitigate and restore those losses.

13.10 Disabling Code.

First Data represents and warrants that, without the prior written consent of RCSI, First Data shall not knowingly insert into the First Data Software any code which would have the effect of disabling or otherwise shutting down all or any portion of the First Data Software or Production Services. First Data further represents and warrants that, with respect to any disabling code that may be part of the First Data Software, First Data shall not invoke such disabling code at any time, including upon expiration or termination of this Agreement for any reason, without RCSI’s prior written consent.

13.11 Disclaimer.

EXCEPT AS PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER EXPRESS WARRANTIES AND THERE ARE NO IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS AGREEMENT IS A SERVICE AGREEMENT AND THE PROVISIONS OF ARTICLE II OF THE UNIFORM COMMERCIAL CODE SHALL NOT APPLY TO IT.

 

14. INSURANCE AND RISK OF LOSS

14.1 Insurance.

First Data shall during the Term have and maintain in force the following insurance coverages:

(a) Worker’s Compensation Insurance, including occupational illness or disease coverage, or other similar social insurance in accordance with the laws of the country, state, or territory exercising jurisdiction over the employee and Employer’s Liability Insurance with a minimum limit of $1,000,000 per occurrence.

(b) Comprehensive General Liability Insurance, including Products, Completed Operations Liability and Personal Injury, Contractual Liability and Broad Form Property Damage Liability coverage for damages to any property with a minimum combined single limit of $5,000,000 per occurrence. This policy shall be endorsed to name RCSI and its Affiliates as additional insureds.

 

 

PSA    39    RCSI / First Data Confidential


Final Execution Version

 

(c) Electronic Data Processing All Risk Property Insurance on equipment, data, media and valuable papers, including extra expense coverage, with a minimum limit adequate to cover such risks on a replacement costs basis.

(d) Automotive Liability Insurance covering use of all owned, non-owned, and hired automobiles with a minimum combined single limit of $5,000,000 per occurrence for bodily injury and property damage liability. This policy shall be endorsed to name RCSI and its Affiliates as additional insureds.

(e) Umbrella Liability Insurance with a minimum limit of *** in excess of the insurance under policies indicated in Sections 14.1(a), 14.1(b), and 14.1(d).

(f) Employee Dishonesty and Computer Fraud coverage for loss arising out of or in connection with any fraudulent or dishonest acts committed by the employees of First Data, acting alone or in collusion with others, including the property and funds of others in their care, custody or control, in a minimum amount of $10,000,000. This policy shall name RCSI and its Affiliates as loss payees.

(g) Errors and Omissions Liability Insurance covering the liability for financial loss due to error, omission, negligence of employees and machine malfunction in an amount of at least $10,000,000.

The foregoing insurance coverages shall be primary and non-contributing with respect to any other insurance or self insurance which may be maintained by RCSI. Upon request by RCSI, First Data shall cause its insurers to issue certificates of insurance evidencing that the coverages and policy endorsements required under this Agreement are maintained in force and that not less than thirty (30) days written notice shall be given to RCSI prior to any modification, cancellation or non-renewal of the policies. The insurers selected by First Data shall have an A.M. Best rating of A- or better or, if such ratings are no longer available, with a comparable rating from a recognized insurance rating agency. First Data shall assure that its Subcontractors, if any, maintain insurance coverages as specified in this Section 14 or that, if a Subcontractor does not maintain the coverages, each such Subcontractor will be listed as an additional named insured on the related coverage of First Data, as applicable.

14.2 Risk of Loss.

Each Party shall be responsible for risk of loss of, and damage to, any equipment, software or other materials in its possession or under its control.

 

15. INDEMNITIES

15.1 Indemnity by First Data.

First Data agrees to indemnify, defend and hold harmless RCSI and its Affiliates and their respective officers, directors, employees, agents, successors, and assigns, from any and all Losses and threatened Losses arising from, in connection with, or based on allegations of, any of the following:

(a) First Data’s breach of any of its duties or obligations under this Agreement;

 

 

PSA    40    RCSI / First Data Confidential


Final Execution Version

 

(b) Any claims of infringement of any patent, trade secret, copyright or other proprietary rights, alleged to have occurred because of systems or other resources provided by First Data to RCSI, or based upon performance of the Production Services by First Data, except to the extent the claim: (i) is caused by RCSI’s use of the First Data System outside the intended scope of Production Services; ***; and

(c) For errors arising under this Agreement only (i.e., not to include errors arising under the TSA) with respect to mailing Cardholder Statements, *** sent in any second set of mailings the necessity for which was caused by First Data’s errors or omissions; provided that with respect to each such incident (i) RCSI shall bear *** of the liability above *** and (ii) First Data’s aggregate liability shall be limited to ***. In settling RCSI Customer claims RCSI will have a duty to act reasonably to mitigate damages, subject to considerations of RCSI Customer relations and following consultation with First Data. In determining damages, RCSI will be allowed to prove damages by reasonable estimation based upon comparing the situation at hand with applicable prior experiences, but the methodology must be reasonably designed to estimate actual damages (i.e., must be a comparable comparison). The Parties will attempt to agree on the amounts of damages and the methodology for estimating such damages. If the Parties cannot agree on the amount of damages or the methodology for estimation thereof, they may have experts present to an arbitrator in binary arbitration pursuant to Section 17.2 (e.g., the arbitrator must consider the amounts proposed by each Party and then choose only between the Parties’ respective positions as to which one is more reasonable and the arbitrator may not choose any other alternative). Liability for damages under this Section 15.1(c) shall not include:

(i) Lost interest or late fees;

(ii) Lost sales by the RCSI Customer;

(iii) Any damages of any type (including the type described in Section 16.2(a)) incurred by any person other than with respect to RCSI’s and its Affiliates’ liability to the RCSI Customer (and its Affiliates), specifically including RCSI and RCSI’s Affiliates (other than with respect to RCSI’s and its Affiliates’ liability to the RCSI Customer impacted); or

(iv) Any damages not specifically provided in this Section 15.1(c).

The indemnity in this Section 15.1(c) is RCSI’s sole remedy for damages *** issued as a result of First Data mailing errors as provided in this Section 15.1(c).

15.2 Indemnity by RCSI.

RCSI agrees to indemnify, defend and hold harmless First Data and its Affiliates and their respective officers, directors, employees, agents, successors, and assigns, from any and all Losses and threatened Losses arising from, in connection with, or based on allegations of, any of the following:

(a) RCSI’s breach of any of its duties or obligations under this Agreement and;

(b) Any claims of infringement of any patent, trade secret, copyright or other proprietary rights, alleged to have occurred because of (i) RCSI’s use of the First Data System in a manner outside the intended scope of the Production Services; ***.

 

 

PSA    41    RCSI / First Data Confidential


Final Execution Version

 

15.3 Additional Indemnities.

Each Party shall indemnify, defend and hold harmless the other Party, and the other Party’s Affiliates, and their officers, directors, employees, agents, successors, and assigns, from any and all Losses and threatened Losses arising from, in connection with, or based on allegations of, any of the following: (a) the death or bodily injury of any agent, employee, customer, business invitee, or business visitor or other person caused by the tortious conduct of the indemnitor; (b) the damage, loss or destruction of any real or tangible personal property caused by the tortious conduct of the indemnitor; (c) any claim, demand, charge, action, cause of action, or other proceeding asserted against the indemnitee but resulting from an act or omission of the indemnitor in its capacity as an employer of a person; (d) any claim by any person arising out of his or her employment with the indemnitor, any application for such employment or the termination thereof; and (e) any claim by any person alleging to the effect that such person is jointly employed by the indemnitee as a result of performing any services as an employee or independent contractor of the indemnitor.

15.4 Infringement.

If any item used by First Data to provide the Production Services becomes, or in First Data’s reasonable opinion is likely to become, the subject of an infringement or misappropriation claim or proceeding, First Data shall, in addition to indemnifying RCSI as provided in this Section 15 and to the other rights RCSI may have under this Agreement, promptly at First Data’s expense take the following actions: (a) secure the right to continue using the item or replace or modify the item to make it non-infringing, provided that any such replacement or modification will not degrade the performance or quality of the affected component of the Production Services; or (b) if (a) is not available to First Data, remove the item from the Production Services and equitably adjust First Data’s charges to adequately reflect such removal.

15.5 Indemnification Procedures.

With respect to third-party claims, the following procedures shall apply:

(a) Notice. Promptly after receipt by any entity or individual entitled to indemnification under Sections 15.1 through 15.3 of notice of the commencement or threatened commencement of any civil, criminal, administrative, or investigative action or proceeding involving a claim in respect of which the indemnitee will seek indemnification pursuant to any such Section, the indemnitee shall notify the indemnitor of such claim in writing. No failure to so notify an indemnitor shall relieve it of its obligations under this Agreement except to the extent that it can demonstrate damages attributable to such failure. Within fifteen (15) days following receipt of written notice from the indemnitee relating to any claim, but no later than ten (10) days before the date on which any response to a complaint or summons is due, the indemnitor shall notify the indemnitee in writing if the indemnitor elects to assume control of the defense and settlement of that claim (a “Notice of Election”).

 

 

PSA    42    RCSI / First Data Confidential


Final Execution Version

 

(b) Procedure Following Notice of Election. If the indemnitor delivers a Notice of Election relating to any claim within the required notice period, the indemnitor shall be entitled to have sole control over the defense and settlement of such claim; provided that (i) the indemnitee shall be entitled to participate in the defense of such claim and to employ counsel at its own expense to assist in the handling of such claim, and (ii) the indemnitor shall obtain the prior written approval of the indemnitee before entering into any settlement of such claim or ceasing to defend against such claim. After the indemnitor has delivered a Notice of Election relating to any claim in accordance with the preceding paragraph, the indemnitor shall not be liable to the indemnitee for any legal expenses incurred by the indemnitee in connection with the defense of that claim. In addition, the indemnitor shall not be required to indemnify the indemnitee for any amount paid or payable by the indemnitee in the settlement of any claim for which the indemnitor has delivered a timely Notice of Election if such amount was agreed to without the written consent of the indemnitor.

(c) Procedure Where No Notice of Election Is Delivered. If the indemnitor does not deliver a Notice of Election relating to any claim within the required notice period, the indemnitee shall have the right to defend the claim in such manner as it may deem appropriate, at the cost and expense of the indemnitor. The indemnitor shall promptly reimburse the indemnitee for all such costs and expenses.

15.6 Subrogation.

If an indemnitor shall be obligated to indemnify an indemnitee pursuant to Sections 15.1 through 15.3, the indemnitor shall, upon payment of such indemnity in full, be subrogated to all rights of the indemnitee with respect to the claims to which such indemnification relates.

 

16. LIABILITY

16.1 General Intent.

Subject to the specific provisions of this Section 16, it is the intent of the Parties that each Party shall be liable to the other Party for any actual damages incurred by the non-breaching Party as a result of the breaching Party’s failure to perform its obligations in the manner required by this Agreement.

16.2 Liability Limitations.

(a) Subject to Section 16.2(c), IN NO EVENT, WHETHER IN CONTRACT OR IN TORT (INCLUDING BREACH OF WARRANTY, NEGLIGENCE AND STRICT LIABILITY IN TORT), SHALL A PARTY BE LIABLE FOR INDIRECT OR CONSEQUENTIAL, LOST PROFITS, EXEMPLARY, PUNITIVE OR SPECIAL DAMAGES EVEN IF SUCH PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE. This Section 16.2(a) shall ***.

(b) Subject to Section 16.2(c), each Party’s total liability to the other for events occurring within a calendar year, whether in contract or in tort (including breach of warranty, negligence and strict liability in tort), shall be limited to an

 

 

PSA    43    RCSI / First Data Confidential


Final Execution Version

 

amount equal to the greater of (i) the aggregate monthly charges incurred by RCSI under this Agreement during the *** months prior to the month in which the event giving rise to the liability occurred (including, for the avoidance of doubt, any amounts incurred under the Original Agreement) and (ii) ***; provided, however, to the extent any such liability results from (a) ***, or (b) ***, First Data’s total liability under the preceding clause shall be the greater of (x) the aggregate Monthly Charges incurred by RCSI under this Agreement during the *** months prior to the month in which the event giving rise to the liability occurred (including, for the avoidance of doubt, any amounts incurred under the Original Agreement) and (y) ***. Any liability of First Data under Section 4.6(b) of Schedule B shall be subject to (and count against) the limitations of this Section 16.2(b).

(c) The limitations set forth in Section 16.2(b) shall ***.

(d) In addition to the limitations provided in Section 16.2(b), First Data’s aggregate liability over the Term pursuant to Section 15.1(c) of these Terms and Conditions, Sections 4.6(b) and 4.6(c) of Schedule B and the Special Service Levels shall be limited to ***. If, at the beginning of any Renewal Term, the then-current Headroom (as hereinafter defined) is less than ***, the amount of this limitation shall be increased by the amount necessary to make the limitation applicable to such Renewal Term equal to ***. This limitation may also be reset pursuant to Section 18.4. “Headroom” means amount, if any, be which the then-current limitation on liability under this Section 16.2(d) exceeds the then-current amounts that have been subject to and counted against this limitation.

(e) Each Party shall have a duty to mitigate damages for which the other Party is responsible.

16.3 Force Majeure.

(a) Neither Party shall be liable for any default or delay in the performance of its obligations under this Agreement (i) if and to the extent such default or delay is caused, directly or indirectly, by fire, flood, earthquake, elements of nature or acts of God or any other cause beyond the reasonable control of such Party; and (ii) provided the non-performing Party is without fault in causing such default or delay, and such default or delay could not have been prevented by reasonable precautions and cannot reasonably be circumvented by the non-performing Party through the use of alternate sources, workaround plans or other means (including with respect to First Data by First Data meeting its obligations for performing disaster recovery services as described in this Agreement).

(b) In such event the non-performing Party shall be excused from further performance or observance of the obligation(s) so affected for as long as such circumstances prevail and such Party continues to use its best efforts to recommence performance or observance whenever and to whatever extent possible without delay. Any Party so delayed in its performance shall immediately notify the Party to whom performance is due by telephone (to be confirmed in writing within two (2) days of the inception of such delay) and describe at a reasonable level of detail the circumstances causing such delay.

(c) If any event under Section 16.3(a) above substantially prevents, hinders, or delays performance of the Production Services necessary for the

 

 

PSA    44    RCSI / First Data Confidential


Final Execution Version

 

performance of RCSI functions reasonably identified by RCSI as critical for more than *** consecutive days, then at RCSI’s option, RCSI may procure such Production Services from an alternate source, and First Data shall be liable for payment for such Production Services from the alternate source for so long as the delay in performance shall continue. If any event under Section 16.3(a) above substantially prevents, hinders, or delays performance of the Production Services necessary for the performance of RCSI functions reasonably identified by RCSI as critical for more than thirty (30) consecutive days, then at RCSI’s option, (i) RCSI may terminate any portion of this Agreement so affected and the charges payable hereunder shall be equitably adjusted to reflect those terminated Production Services; or (ii) RCSI may terminate this Agreement without liability to RCSI or First Data as of a date specified by RCSI in a written notice of termination to First Data. First Data shall not have the right to any additional payments from RCSI for costs or expenses incurred by First Data as a result of any force majeure occurrence.

 

17. DISPUTE RESOLUTION

Any dispute between the Parties arising out of or relating to this Agreement, including with respect to the interpretation of any provision of this Agreement and with respect to the performance by First Data or RCSI, shall be resolved as provided in this Section 17.

17.1 Informal Dispute Resolution.

Prior to the initiation of formal dispute resolution procedures, the Parties shall first attempt to resolve their dispute informally, as follows:

(a) Upon the written request of a Party, each Party shall appoint a designated representative who does not devote substantially all of his or her time to performance under this Agreement, whose task it will be to meet for the purpose of endeavoring to resolve such dispute.

(i) The designated representatives shall meet as often as the Parties reasonably deem necessary in order to gather and furnish to the other all information with respect to the matter in issue which the Parties believe to be appropriate and germane in connection with its resolution. The representatives shall discuss the problem and attempt to resolve the dispute without the necessity of any formal proceeding.

(ii) During the course of discussion, all reasonable requests made by one Party to another for non-privileged information, reasonably related to this Agreement, shall be honored in order that each of the Parties may be fully advised of the other’s position.

(iii) The specific format for the discussions shall be left to the discretion of the designated representatives.

(b) Formal proceedings for the resolution of a dispute may not be commenced until the earlier of:

(i) the designated representatives concluding in good faith that amicable resolution through continued negotiation of the matter does not appear likely; or

(ii) thirty (30) days after the initial written request to appoint a designated representative pursuant to Section 17.1(a) above (this period shall be deemed to run notwithstanding any claim that the process described in this Section 17.1(a) was not followed or completed).

 

 

PSA    45    RCSI / First Data Confidential


Final Execution Version

 

This Section 17.1 shall not be construed to prevent a Party from instituting, and each Party is authorized to institute, formal proceedings earlier to avoid the expiration of any applicable limitations period, or to preserve a superior position with respect to other creditors, and as provided in Sections 17.3(a) and 18.7 (Equitable Remedies).

17.2 Arbitration.

If the Parties are unable to resolve any dispute as contemplated by Section 17.1 and if such dispute is not subject to Sections 17.3(a) or 18.7 (Equitable Remedies), then such dispute shall be submitted to mandatory and binding arbitration at the election of either Party (the “Disputing Party”) pursuant to the following conditions:

(a) Selection of Arbitrator. The Disputing Party shall notify the CPR Institute for Dispute Resolution (“CPR”) and the other Party in writing describing in reasonable detail the nature of the dispute (“the Dispute Notice”), and shall request that the CPR furnish a list of five (5) possible arbitrators who shall have substantial experience in the areas of card processing or print and mail and embossing services. Each Party shall have fifteen (15) days to reject two (2) of the proposed arbitrators. If only one individual has not been so rejected, he or she shall serve as arbitrator; if two or more individuals have not been so rejected, the CPR shall select the arbitrator from those individuals.

(b) Conduct of Arbitration. The arbitrator shall allow reasonable discovery to the extent consistent with the purpose of the arbitration. The arbitrator shall have no power or authority to amend or disregard any provision of this Section 17.2 or any other provision of this Agreement (in particular, the arbitrator shall not have the authority to exclude the right of a Party to terminate this Agreement when a Party would otherwise have such right). The arbitration hearing shall be commenced promptly and conducted expeditiously, with each of RCSI and First Data being allocated one-half of the time for the presentation of its case. Unless otherwise agreed by the Parties, an arbitration hearing shall be conducted on consecutive days.

(c) Replacement of Arbitrator. Should the arbitrator refuse or be unable to proceed with arbitration proceedings as called for by this Section 17.2, such arbitrator shall be replaced by an arbitrator selected from the other four (4) arbitrators originally proposed by the CPR and not rejected by the Parties, if any, or if there are no remaining proposed arbitrators who have not been rejected, by repeating the process of selection described in Section 17.2(a) above. If an arbitrator is replaced pursuant to this Section 17.2(c), then a rehearing shall take place in accordance with the provisions of this Section 17.2.

(d) Findings and Conclusions. The arbitrator rendering judgment upon disputes between Parties as provided in this Section 17.2 shall, after reaching judgment and award, prepare and distribute to the Parties a writing describing the

 

 

PSA    46    RCSI / First Data Confidential


Final Execution Version

 

findings of fact and conclusions of law relevant to such judgment and award and containing an opinion setting forth the reasons for the giving or denial of any award. The award of the arbitrator shall be final and binding on the Parties, and judgment thereon may be entered in a court of competent jurisdiction.

(e) Place of Arbitration Hearings. Unless otherwise agreed by the Parties, arbitration hearings hereunder shall be held in Stamford, Connecticut.

(f) Time of the Essence. The arbitrator is instructed that time is of the essence in the arbitration proceeding, and that the arbitrator shall have the right and authority to issue monetary sanctions against either of the Parties if, upon a showing of good cause, that Party is unreasonably delaying the proceeding. The arbitrator shall render his or her judgment or award within fifteen (15) days following the conclusion of the hearing. Recognizing the express desire of the Parties for an expeditious means of dispute resolution, the arbitrator shall limit or allow the Parties to expand the scope of discovery as may be reasonable under the circumstances.

17.3 Litigation.

(a) Immediate Injunctive Relief. The Parties agree that the only circumstances in which disputes between them shall not be subject to the provisions of Sections 17.1 and 17.2 is (i) as provided in Section 17.1 and (b) where a Party makes a good faith determination that a breach of the terms of this Agreement by the other Party is such that a temporary restraining order or other injunctive relief is the only adequate remedy. If a Party files a pleading with a court seeking immediate injunctive relief and this pleading is challenged by the other Party and the injunctive relief sought is not awarded in substantial part, the Party filing the pleading seeking immediate injunctive relief shall pay all of the costs and attorneys’ fees of the Party successfully challenging the pleading.

(b) Jurisdiction. The Parties consent to venue in the State of New York and to the non-exclusive jurisdiction of competent State of New York court or federal courts in the Southern District of New York for all litigation which may be brought, subject to the requirement for arbitration hereunder, with respect to the terms of, and the transactions and relationships contemplated by, this Agreement. The Parties further consent to the jurisdiction of any state or federal court with appropriate subject matter jurisdiction located within a district which encompasses assets of a Party against which a judgment has been rendered, either through arbitration or through litigation, for the enforcement of such judgment or award against the assets of such Party.

17.4 Continued Performance.

Each Party agrees to continue performing its obligations under this Agreement while any dispute is being resolved except to the extent the issue in dispute precludes performance; provided that a dispute over payment shall not be deemed to preclude performance.

17.5 Governing Law.

This Agreement and performance under it shall be governed by and construed in accordance with the laws of the State of New York without regard to its choice of law principles.

 

 

PSA    47    RCSI / First Data Confidential


Final Execution Version

 

18. TERMINATION

18.1 Termination for Cause.

(a) If First Data:

(i) commits a material breach of this Agreement, which breach is not cured within thirty (30) days after notice of breach from RCSI to First Data; provided, however, that, unless (A) a different period of time to cure is specified in this Agreement or (B) an extension of time to cure which is contingent upon the exercise by First Data of diligent efforts to cure is not specifically provided, if First Data is making diligent efforts to cure any such breach from the start of the thirty-day (30) cure period, then such cure period shall be extended for an additional period (not to exceed thirty (30) days);

(ii) commits a material breach of this Agreement which is not capable of being cured within thirty (30) days;

(iii) commits numerous breaches of its duties or obligations which collectively constitute a material breach of this Agreement and are not cured within a sixty (60) day period after notice of breach from RCSI to First Data; or

(iv) commits an event which under the terms of Schedule B or Schedule C constitutes a Termination Rights Event and RCSI notifies First Data that it elects to terminate within the period provided in the relevant section therein,

then RCSI may by giving written notice to First Data terminate this Agreement, in whole or in part, as of a date specified in the notice of termination. If RCSI chooses to terminate this Agreement in part, the charges payable under this Agreement will be equitably adjusted to reflect the fact that neither RCSI nor the RCSI Affiliates are receiving the Production Services which have been terminated.

(b) If RCSI:

(i) fails to pay First Data when due undisputed charges under this Agreement totaling at least *** charges under this Agreement within sixty (60) days of the time specified for such payment and such default remains uncured thirty (30) days after written notice from First Data specifying the nature and extent of such default; or

(ii) materially breaches its obligations under *** of this Agreement and does not either (A) cure such breach promptly upon notice or (B) if such breach is not curable with commercially reasonable efforts, provide adequate assurances to First Data that RCSI has taken diligent steps to remedy the circumstances that led to such breach;

then First Data may by giving written notice to RCSI terminate this Agreement as of a date specified in the notice of termination (which date shall be not less than twelve (12) months following the date of such notice).

 

 

PSA    48    RCSI / First Data Confidential


Final Execution Version

 

18.2 Termination Upon Change of Control.

In the event of a change in Control of First Data where such Control is acquired, directly or indirectly, in a single transaction or series of related transactions with, or all or substantially all of the assets of First Data are acquired by, a Major Competitor of RCSI, or if First Data is merged with or into another entity that is a Major Competitor of RCSI, then RCSI may, in its sole discretion, terminate this Agreement by giving First Data at least ninety (90) days prior written notice and designating a date upon which such termination shall be effective.

18.3 Termination for Convenience.

RCSI may terminate this Agreement for convenience and without cause effective during any Renewal Period by giving First Data prior written notice and designating an anticipated service termination date at least six (6) months after the date of such notice.

18.4 Termination Due To Failure By First Data To Reset Pursuant to Section 16.2(d).

Within twelve (12) months following any event that would have resulted in a credit to RCSI but which was wholly or partially limited by the application of Section 16.2(d), RCSI may notify First Data in writing that it is electing to terminate this Agreement effective as of a date designated in such notice (but not later than twelve (12) months from the date of the notice). If within twenty (20) days of receipt of RCSI’s notice First Data notifies RCSI in writing that First Data elects to thereafter reset the cap described in Section 16.2(d) to an amount equal to *** multiplied by each full year remaining in the Term of this Agreement (pro-rated monthly if only a portion of the final year remains) (which reset shall not apply to any events that have occurred prior to the date of First Data’s notice) then RCSI’s notice shall be voided and the amount of the limitation shall be reset to an amount equal *** multiplied by each full year remaining in the Term of this Agreement (pro-rated monthly if only a portion of the final year remains).

18.5 Extension of Termination Effective Date.

RCSI may request First Data to extend the effective date of any termination. If First Data elects to grant such an extension, First Data may implement revised pricing and other necessary terms applicable to the length of and other circumstances surrounding the requested extension.

18.6 Termination/Expiration Assistance.

(a) Beginning twelve (12) months prior to expiration of this Agreement or on such earlier date as RCSI may request, or commencing upon any notice of termination or of non-renewal of this Agreement (including notice based upon default by RCSI), First Data shall provide the assistance that RCSI requests, either on its own behalf or on the behalf of any successor provider of services (collectively, “Successor”) which may reasonably be required in connection with the transition of the Production Services (“Termination/Expiration Assistance”). “Terminated Services” means any Production Services that First Data will cease to provide as a result of any expiration or termination of this Agreement either in its entirety or with respect to such Production Services. If the Successor is an entity other than

 

 

PSA    49    RCSI / First Data Confidential


Final Execution Version

 

RCSI, RCSI shall obtain from the Successor written assurance that the Successor will maintain the confidentiality of First Data’s Confidential Information disclosed or provided to the Successor in the course of receiving such Termination/Expiration Assistance. RCSI shall return all First Data Confidential Information provided to RCSI under this Section 18.6 within thirty (30) days after the transition of Production Services is completed. First Data’s Termination/Expiration Assistance shall include and be governed by the following:

(b) General. First Data shall:

(i) Provide a plan (the “Termination/Expiration Assistance Plan”) for the transition of requested operations from First Data which plan is subject to approval by RCSI, and the Termination/Expiration Assistance Plan shall include at a minimum:

(A) A detailed description of the plan and exhibit for transferring performance of the Terminated Services to RCSI and/or its Successor;

(B) A detailed description of First Data’s responsibilities in support of such transfer of the Terminated Services;

(C) Details of First Data Personnel and other resources to be used in providing Termination/Expiration Assistance, which will include identification of any additional personnel to be used by First Data; and

(D) If the Parties contemplate that First Data Personnel will transfer to RCSI after the notice of termination, procedures addressing the transfer to RCSI and/or its Successor (if applicable) of any such First Data Personnel and other resources to be transferred pursuant to this Section.

(ii) Provide RCSI access to and use of the information of the personnel, third parties and other resources then being used by First Data to provide the Production Services to RCSI.

(iii) Provide RCSI with such information regarding the Production Services as is reasonably prudent or necessary in order for the Successor to assume responsibility for, and continue the performance of, the Production Services in an orderly manner, so as to minimize, as much as possible, disruption in the operations of RCSI.

(c) Pre-Migration Services. First Data shall:

(i) Provide a list of all Equipment, Software and materials used to provide the Production Services and (if applicable) third party services used in providing the Terminated Services.

(ii) Provide to RCSI copies of documentation and other information regarding the Production Services that are required to implement the transition plan, including the Procedures Manual.

 

 

PSA    50    RCSI / First Data Confidential


Final Execution Version

 

(iii) Provide an inventory of telephone numbers being used by First Data in conjunction with performing the Terminated Services.

(iv) Provide assistance to RCSI in notifying third party vendors of the procedures to be followed during the turnover phase.

(v) Assist RCSI in understanding naming conventions.

(vi) Provide to RCSI access to First Data Personnel who were performing the Production Services in order that such personnel may answer the Successor’s questions.

(vii) To the extent that First Data and RCSI have established protocols and procedures with respect to how First Data would assist RCSI in the event of an RCSI disaster, train and inform RCSI and Successor of such protocols and procedures related thereto.

(viii) Update and provide documentation used by First Data to provide business continuity services.

(ix) Cooperate with RCSI in the preparation for and conduct of migration testing to ensure the orderly transfer of the Terminated Services; and

(x) Provide to RCSI current and pending project plans and status to enable RCSI to perform services with minimum disruption to RCSI’s operation.

(d) Migration Services. First Data shall:

(i) In conjunction with RCSI and/or Successor, conduct the cutover of the Terminated Services and support the commencement of the operations by RCSI and/or Successor; and

(ii) Arrange for additional overlapping business continuity coverage and support to minimize disruption.

(e) Post Migration Services. First Data shall:

(i) Provide additional assistance at RCSI’s request to assure continuity of operations relating to or affecting the Production Services. Upon request by RCSI, First Data shall maintain account information on-line for a period of time to be specified by RCSI.

(ii) As requested by RCSI, return to RCSI at RCSI’s request, any remaining property of RCSI in First Data’s possession, including any remaining reports, data, and other RCSI Information with respect to the Production Services. Alternatively, as required by RCSI, First Data shall destroy such property.

(iii) As requested by RCSI, certify to RCSI in writing that all of RCSI’s data and files and all other RCSI Information with respect to the Production Services have been removed from the First Data System, premises and control and returned or destroyed.

 

 

PSA    51    RCSI / First Data Confidential


Final Execution Version

 

(f) Personnel. RCSI or its designee shall be permitted to undertake, without liability to First Data, to hire any First Data employees primarily performing the Services as of the date of notice of termination, or, in the case of expiration, within the six (6) month period (or longer period requested by RCSI) prior to expiration. First Data shall waive any restrictive covenants in any contracts with First Data employees restricting such First Data employees from entering into RCSI’s or its designee’s employ.

(g) Third Party Services. To the extent necessary to complete the transition and to the extent permitted by First Data’s contract with the third party, First Data shall make available or use its best efforts to make available to the extent not permitted by First Data’s contract with the third party to Successor or its designee, pursuant to reasonable terms and conditions, any third party services then being utilized by First Data in the performance of the Production Services including services being provided through third party service. First Data will be entitled to retain the right to utilize any such third party services in connection with the performance of services for any other First Data customer.

(h) Survival; Continuity of Services. This Section 18.6 shall survive termination/expiration of this Agreement. For eighteen (18) months following the effective date of termination/expiration under other provisions of this Agreement, First Data shall provide, at RCSI’s request, any or all of the Terminated Services being performed by First Data prior to such effective date, including any of the Terminated Services under this Section 18.6. To the extent First Data is to perform Terminated Services under this Section 18.6, the provisions of this Agreement shall be applicable as such provisions would have been applicable to such Services prior to such effective date giving due consideration to the reduction in scope and volumes requested by RCSI. Accordingly, to the extent First Data does not continue to provide a material portion of the Production Services, the remaining services shall be provided at First Data’s then standard rates for such services.

18.7 Equitable Remedies.

First Data acknowledges that, in the event it breaches (or attempts or threatens to breach) its obligation to provide Termination/Expiration Assistance as provided in Section 18.6 or breaches its obligation of confidentiality pursuant to Section 12, RCSI will be irreparably harmed. In such a circumstance, RCSI may proceed directly to court. If a court of competent jurisdiction should find that First Data has breached (or attempted or threatened to breach) its obligation to provide Termination/Expiration Assistance or its obligation of confidentiality, First Data waives its right to request or obtain any additional findings of irreparable injury or other conditions to injunctive relief, it shall not oppose the entry of an appropriate order compelling performance by First Data and restraining it from any further breaches (or attempted or threatened breaches). This Section 18.7 does not in any manner limit the rights of the Parties under Section 17.3(a).

 

 

PSA    52    RCSI / First Data Confidential


Final Execution Version

 

19. GENERAL

19.1 Binding Nature and Assignment.

This Agreement shall be binding on the Parties hereto and their respective successors and assigns. Neither Party may, or shall have the power to, assign this Agreement without the prior written consent of the other, except that RCSI may assign its rights and obligations under this Agreement without the approval of First Data to (a) any entity which acquires (i) all or substantially all of the assets of RCSI, or (ii) all or substantially all of the assets of one or more of the business units of RCSI; (b) any RCSI Affiliate; or (c) any successor entity in a merger or acquisition of RCSI; provided, however, that in all such circumstances any permitted successor or assign shall agree in writing to be bound by and assume all of RCSI’s rights and obligations hereunder.

19.2 Entire Agreement; Amendment.

This Agreement, including any Schedules, Exhibits and addenda referred to herein and attached hereto, each of which is incorporated herein for all purposes, constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements, whether written or oral, with respect to the subject matter contained in this Agreement. No change, waiver, or discharge hereof shall be valid unless in writing and signed by an authorized representative of the Party against which such change, waiver, or discharge is sought to be enforced.

19.3 Notices.

All notices, requests, demands, and determinations under this Agreement (other than routine operational communications), shall be in writing and shall be deemed duly given (a) when delivered by hand, (b) one (1) day after being given to an express courier with a reliable system for tracking delivery, (c) when sent by confirmed facsimile with a copy sent by another means specified in this Section 19.3, or (d) six (6) days after the day of mailing, when mailed by United States mail, registered or certified mail, return receipt requested, postage prepaid, and addressed as follows:

 

In the case of RCSI:

 

c/o Chief Information Officer

GE Money Americas

777 Long Ridge Road

Stamford, Connecticut 06927

 

with a copy to:

 

Ricky B.W. Davis, Esq.

Senior Counsel

GE Capital Retail Finance &

Restructuring Operations

901 Main Avenue

Norwalk, Connecticut 06851

  

In the case of First Data:

 

President

First Data Resources, LLC

6855 Pine Street

Omaha, Nebraska 68106

 

with a copy to:

 

General Counsel

First Data Resources, LLC

6855 Pine Street

Omaha, Nebraska 68106

 

 

PSA    53    RCSI / First Data Confidential


Final Execution Version

 

and, if notice of default or termination, with a copy to:

 

James L. Alberg, Esq.

Pillsbury Winthrop Shaw Pittman LLP

2300 N Street NW

Washington, DC 20037

  

Each Party may from time to time change its address or designee for notification purposes by giving the other prior written notice of the new address or designee and the date upon which it will become effective.

19.4 Counterparts.

This Agreement may be executed in several counterparts, all of which taken together shall constitute one single agreement between the Parties.

19.5 Mutual Release of Claims.

(a) Each Party on its own behalf releases, discharges, and acquits the other Party and its Affiliates from any and all breaches, causes of action and claims, including damages and costs related thereto (whether known or unknown, matured or unmatured, asserted or unasserted) arising out of the Agreement prior to the Execution Date, other than:

(i) liabilities for taxes;

(ii) RCSI’s obligation to pay invoices for Services rendered in the prior ninety (90) days;

(iii) breaches of obligations of confidentiality not actually known to the injured Party’s senior officers responsible for dealing with the other Party;

(iv) breaches of obligations which give rise to third party liability, whether known or unknown, and which are subject to the indemnity under Section 16.1(b), Section 16.2(b), or Section 16.3 of this Agreement as it existed prior to the Execution Date; and

(v) claims for personal injury or property damage which are the subject of insurance coverage requirements.

(b) The exclusive remedy for any breach, cause of action or claim related to any of the foregoing exceptions shall be monetary damages only and no such breaches, causes of action or claims shall serve as the basis for termination of this Agreement, except for breaches of confidentiality which were significant in scope and which are subject to Section 19.5(a)(iii).

19.6 Headings.

The section headings and the table of contents used herein are for reference and convenience only and shall not enter into the interpretation hereof.

 

 

PSA    54    RCSI / First Data Confidential


Final Execution Version

 

19.7 Relationship of the Parties.

First Data is, and shall at all times be, an independent contractor under this Agreement and not an agent of RCSI. Nothing in this Agreement nor any actions taken by or arrangements entered into between the Parties in accordance with the provisions of this Agreement shall be construed as or deemed to create as to the Parties any partnership or joint venture. First Data shall not have any authority to bind or commit RCSI contractually or otherwise to any obligations whatsoever to third parties.

19.8 Severability.

If any provision of this Agreement conflicts with the law under which this Agreement is to be construed or if any such provision is held invalid by an arbitrator or a court with jurisdiction over the Parties, such provision shall be deemed to be restated to reflect as nearly as possible the original intentions of the Parties in accordance with applicable law. The remainder of this Agreement shall remain in full force and effect.

19.9 Consents and Approval.

Except where expressly provided as being in the discretion of a Party, where agreement, approval, acceptance, consent, or similar action by either Party is required under this Agreement, such action shall not be unreasonably delayed or withheld. An approval or consent given by a Party under this Agreement shall not relieve the other Party from responsibility for complying with the requirements of this Agreement, nor shall it be construed as a waiver of any rights under this Agreement, except as and to the extent otherwise expressly provided in such approval or consent.

19.10 Waiver of Default; Cumulative Remedies.

(a) A delay or omission by either Party to exercise any right or power under this Agreement shall not be construed to be a waiver thereof. A waiver by either of the Parties of any of the covenants to be performed by the other or any breach thereof shall not be construed to be a waiver of any succeeding breach thereof or of any other covenant in this Agreement.

(b) Except as otherwise expressly provided in this Agreement, all remedies provided for in this Agreement shall be cumulative and in addition to and not in lieu of any other remedies available to either Party at law, in equity or otherwise.

19.11 Survival.

Any provision of this Agreement which contemplates performance or observance subsequent to any termination or expiration of this Agreement, including those provisions relating to the obligations of First Data in connection with the termination/expiration assistance, shall survive any termination or expiration of this Agreement and continue in full force and effect.

19.12 Public Disclosures.

All media releases, public announcements, and public disclosures by either Party relating to this Agreement or the subject matter of this Agreement, including promotional or marketing material, shall be coordinated with and approved by the other Party prior to release.

 

 

PSA    55    RCSI / First Data Confidential


Final Execution Version

 

19.13 Service Marks.

First Data agrees that it shall not, without RCSI’s prior written consent, use the name, service marks or trademarks of RCSI or of any RCSI Affiliates.

19.14 Third Party Beneficiaries.

Except as provided in Section 15 (Indemnification), this Agreement is entered into solely between, and may be enforced only by, RCSI and First Data; and this Agreement shall not be deemed to create any rights in third parties, including suppliers and customers of a Party, or to create any obligations of a Party to any such third parties.

19.15 Covenant of Good Faith.

Each Party agrees that, in its respective dealings with the other Party under or in connection with this Agreement, it shall act in good faith.

19.16 Order of Precedence

In the event of a conflict between the documents comprising this Agreement as of its Effective Date and the documents comprising a Change Order executed subsequent to the Effective Date, the terms of the Change Order will prevail; provided, however, that a Change Order may amend or override the terms and conditions set forth in this Agreement only if (and to the extent that) the Change Order specifically identifies the provision(s) the Parties intend to amend or override and the executed version of the Change Order has been approved by the authorized representatives of both Parties, as evidenced in writing on the executed version of it.

19.17 Interpretation

(a) Unless otherwise indicated, section references are to sections of the document in which the reference is contained. References to sections will be deemed to also refer to and include all subsections of the referenced section.

(b) This Agreement will be deemed to have been written by both Parties, each of whom has been represented by counsel, and shall not be construed against either Party on the basis that it drafted it.

(c) Unless the context requires otherwise, (i) “including” (and any of its derivative forms) means including but not limited to, (ii) “may” means has the right, but not the obligation to do something and “may not” means does not have the right to do something, (iii) “will” and “shall” are expressions of command, not merely expressions of future intent or expectation, (iv) “written” or “in writing” is used for emphasis in certain circumstances, but that will not derogate from the general application of the notice requirements set forth as applicable in those and other circumstances, (v) use of the singular imports the plural and vice versa, and (vi) use of a specific gender imports the other gender.

 

 

PSA    56    RCSI / First Data Confidential


Final Execution Version

 

19.18 Relationship to Original Agreement.

This Agreement replaces and supersedes the Original Agreement as of the Effective Date, and shall be deemed a continuation thereof. If any provision of this Agreement purports to be effective prior to the Effective Date it shall be deemed an amendment to the Original Agreement until such time as the Effective Date has occurred. Subject to adjustment to such charges provided for herein, all charges provided for under the Original Agreement for Production Services provided prior to the Effective Date shall be due and payable in the ordinary course.

 

 

PSA    57    RCSI / First Data Confidential


IN WITNESS WHEREOF, RCSI and First Data have each caused this Agreement to be signed and delivered by its duly authorized officer, all as of the Effective Date.

 

RETAILER CREDIT SERVICES, INC.     FIRST DATA RESOURCES, LLC
By:   /s/ Ralph A. Passarelli     By:   /s/ W. Gay Rich
Name:   Ralph A. Passarelli     Name:   W. Gay Rich
Title:   Attorney In Fact     Title:   Senior Vice President
Date:   August 19, 2009     Date:   August 19, 2009


Final Execution Version

Schedule A

Services

FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

by and between

RETAILER CREDIT SERVICES, INC.

and

FIRST DATA RESOURCES, LLC.

 

 

Schedule A      RCSI / First Data Confidential


Final Execution Version

 

TABLE OF CONTENTS

 

1

 

INTRODUCTION

     1   
  1.1   

General Introduction.

     1   
  1.2   

Definitions.

     1   
  1.3   

Days of Coverage

     6   

2.

 

DATA TRANSMISSIONS

     7   

3.

 

PRINT PRODUCTION SERVICES

     7   
  3.1   

Basic Production Services for Statements and Letters

     7   
  3.2   

SCS Services

     9   
  3.3   

Specific Requirements Regarding Letters

     12   
  3.4   

Print Production Services Inventory.

     12   
  3.5   

Other Print Production Services

     13   

4.

 

PLASTICS PRODUCTION SERVICES

     16   
  4.1   

Basic Production Services for Embossing

     16   
  4.2   

Other Plastics Production Services

     17   
  4.3   

PayPass Plastics Services for the Meijer Program

     17   
  4.4   

Transaction Card Natural Re-Issue

     18   
  4.5   

Plastics Production Services Inventory.

     19   
  4.6   

Digital Card Print Services.

     20   

5.

 

TECHNOLOGY USED TO PERFORM THE PRODUCTION SERVICES

     20   
  5.1   

Print Production Services

     20   
  5.2   

Plastics Production Services

     21   

6.

 

SUPPORT SERVICES

     21   
  6.1   

Introduction

     21   
  6.2   

Perform Quality Checks and Reviews of Production Output of Transaction Cards, Letters, Statements and Other Correspondence.

     21   
  6.3   

RCSI Customer Requirements

     21   
  6.4   

Mail Tracking and Barcoding

     21   
  6.5   

POSTAGE RELATED SERVICES

     22   
  6.6   

Design Support Services

     23   
  6.7   

PROBLEM MANAGEMENT SERVICES

     23   
  6.8   

DISASTER AND BUSINESS RECOVERY

     24   
  6.9   

TRAINING

     27   

7.

 

ANCILLARY SERVICES

     27   
  7.1   

Introduction

     27   
  7.2   

Ancillary Services Related to Print Production Services

     28   
  7.3   

Ancillary Services Related to Plastics Production Services

     31   

 

 

Schedule A      RCSI / First Data Confidential


Final Execution Version

 

LIST OF EXHIBITS

Exhibit A-1 – Process Flow for Statements

Exhibit A-2 – Implementation Terms for SCS and Drop on Demand Technology

Exhibit A-3 – Sample Statement

Exhibit A-4 – Change Control Procedure

Exhibit A-5 – PayPass Specifications

 

 

Schedule A   A - ii    RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE A

PRODUCTION SERVICES

 

1 INTRODUCTION

 

  1.1 General Introduction.

(a) First Data shall provide to RCSI and its Affiliates the Production Services generally described in Section 3 of this Agreement and set forth with more particularity in this Schedule A. First Data shall provide the Production Services so as to comply with the Service Levels, the RCSI Rules and maintain the ISO standards and certifications achieved by RCSI or its Affiliates prior to the Effective Date.

(b) RCSI and its Affiliates operate in a business environment characterized by constant change that directly affects the delivery of the Production Services. First Data shall provide the Production Services described in this Schedule A as they may evolve and change during the Term due to changes in technology and/or changes in RCSI’s or its Affiliate’s business needs, and as the Production Services may be supplemented and enhanced in accordance with this Agreement.

(c) The Production Services described in this Schedule A are intended to be comprehensive as of the Effective Date, but not necessarily all inclusive. Appropriate implementation details and procedures shall be incorporated into the Procedures Manual in accordance with Section 7.4 of this Agreement.

(d) The Production Services are required for RCSI’s business operations in the United States, including its territories.

(e) References to specific resources (e.g., tools, systems) in this Schedule A that are used by First Data in performing the Production Services shall be deemed to include successor or replacement resources.

(f) First Data shall manage and perform the Production Services in a tightly integrated manner (with appropriate consideration given at all times to the impact of change to all Production Services).

 

  1.2 Definitions.

(a) General.

(i) “Account” means a unique database record having a negative, positive, or zero balance during the current billing cycle.

(ii) “Active Collateral” means inventory material that has been used in performance of the Production Services within a rolling six (6) month period.

(iii) “Automatic Rush Embossing” means those Transaction Card Packages required to be completed within a twenty-four (24) hour time frame and is covered by billing element 7611. This service is used to redirect or expedite the delivery of the Transaction Card Package. Automatic Rush Embossing requests are entered into the nightly cycle and are mailed the next Business Day.

 

 

Schedule A      RCSI / First Data Confidential


Final Execution Version

 

(iv) “Basic Production Services” means, collectively, Basic Production Services for Statements and Letters and Basic Production Services for Embossing.

(v) “Basic Production Services for Embossing” means those Production Services identified in Section 4.1 herein which are necessary for the production of Transaction Cards and Transaction Card Packages identical in form, content, composition, functionality and quality to those that First Data provided to RCSI during the six (6) months prior to the Effective Date.

(vi) “Basic Production Services for Statements and Letters” means those Production Services identified in Section 3.1 herein which are necessary for the production of Statements, Statement Packages and Letters identical in form, content, length, composition, functionality and quality to those that First Data produced for RCSI during the six (6) months prior to the Effective Date.

(vii) “Basic Bundled SCS Statement Services” has the meaning provided in Section 3.2(d).

(viii) “Card Carrier” shall refer to the printed document to which the Transaction Cards will be matched prior to mailing. The standard size Card Carrier as of the Effective Date is 8 12” x 11”.

(ix) “Cardholder” means an individual or entity who or that has an Account with an RCSI Customer, RCSI or RCSI’s Affiliates.

(x) “Check” means any check, draft or item processed requiring MICR or required under the terms of the TSA to be processed by First Data.

(xi) “Chip Personalization Services”, means the loading of RCSI data in a manner pursuant to RCSI Chip Personalization Parameters and other designs, instructions and specifications provided by RCSI, on devices (such as a card, fob, cell phone cover or other similar device).

(xii) “Commingle” shall mean the mixing of outgoing Transaction Card mailings with other Statement or Letter mailings between RCSI and other First Data customers. This method is used to spread the consolidation of cards, as a fraud deterrent and to qualify for USPS zip sort credits.

(xiii) “Correspondence DirectorSM Services” means certain document formatting and composition services made available in connection with the SCS Services suite of products.

(xiv) “Cryptography Services” have the meaning set forth in Section 4.3.

 

 

Schedule A   A - 2    RCSI / First Data Confidential


Final Execution Version

 

(xv) “Digital Card” means those First Data Production Services covered by billing elements 7795, 7700, 7796, and 7797 which provide the ability to affix a digitized image on a plastic Transaction Card.

(xvi) “Electronic Statement” shall mean a Statement that has been composed, presented or delivered in an electronic format using the eMessenger Services.

(xvii) “eMessengerSM Services” means certain electronic document delivery services and document availability alerting services.

(xviii) “First Data DecisionQuest® Services” means certain customized, communications-related account record decisioning services.

(xix) “Form Type” means the actual paper/form stock upon which First Data prints the Statement, Letter, or Other Correspondence. Form Types include both (a) generic white forms; and (b) preprinted forms.

(xx) “Hand Emboss Services” means those First Data services covered by billing elements 7747 (as described in Schedule C) which provide the ability to accept information, via the FDR-246 and FDR-246 V Hand Emboss Request Form and create a Transaction Card manually on a stand-alone embossing machine.

(xxi) “Inactive Collateral” means inventory material that has not been used in performance of the Production Services within a rolling six (6) month period.

(xxii) “IntelliColorSM Services” means certain document color printing, MICR printing, selective perforation limited to two (2) perforation plates and related services.

(xxiii) “Key Management Services” has the meaning set forth in Section 4.3(b)(iii).

(xxiv) “Letter” means any non-Statement, non-pin mailer printed correspondence which is performed as part of the Print Production Services.

(xxv) “Manual Rush” means First Data’s rush servicing of an offline RCSI Customer or RCSI request for a Transaction Card. Upon First Data’s receipt of the request for a Manual Rush prior to 5:00 p.m. ET on a Working Day, First Data mails or delivers the Manual Rush Transaction Card Package to a courier on the same Working Day of the request by RCSI or the RCSI Customer. In the event that First Data does not receive the request by 5:00 ET p.m. on that Working Day, First Data will mail or deliver the Manual Rush Transaction Card Package to a courier on the next Working Day. A Manual Rush includes manual embossing of the Transaction Card, Card Carrier printing, manual insertion of the required inserts into the Transaction Card Package, and any other services required to prepare the Transaction Card Package for delivery. Manual Rush applies to any Transaction Card production handled separately from the Basic Production Services for Embossing. If RCSI submits a Manual Rush request prior to 10:00 a.m. ET on a Saturday, First Data will process such request on that same day (Saturday). All Saturday Manual Rush requests submitted by RCSI after 10:00 a.m. ET on that Saturday will be processed by First Data on the next Working Day (Monday). The billing element for a Manual Rush is 7609.

 

 

Schedule A   A - 3    RCSI / First Data Confidential


Final Execution Version

 

(xxvi) “*** Program” means RCSI’s MasterCard PayPass RFID Program in support of RSCI’s *** retail client, ***.

(xxvii) “MICR” means magnetic ink character recognition.

(xxviii) “Other Correspondence” means various non-Statement and non-Letter correspondence and other communications (e.g., promotions, inserts, certificates, Checks, and Coupons) to RCSI, RCSI Customers, Cardholders or Affiliates.

(xxix) “Paper Statement” means a Statement that has been printed on a physical, tangible paper form.

(xxx) “PayPass Plastics Services” are the services provided by First Data in support of RCSI’s MasterCard PayPass RFID program, as defined in Section 4.3. The PayPass Plastics Services provided pursuant to this Agreement shall be limited to the use of Static CVC3 values.

(xxxi) “PayPass Specifications and Related Materials” or collectively ‘’PayPass Specifications” means the specifications provided by MasterCard in connection with the MasterCard PayPass RFID program, as well as any and all related documentation, technical manuals, code and related materials, and any and all future or successor versions or releases thereof.

(xxxii) “PEP” means First Data’s PlastiCard Enterprise Presentation functionality.

(xxxiii) “Photocard Services” means those First Data Production Services covered by billing elements 7664, 7665, 7666, 7667, 7668 and 7669 (as described in Schedule C) which provide the ability to affix a digitized photographic image on a plastic Transaction Card.

(xxxiv) “Plasticard Purging” means each manual removal of a Card Carrier, printed PIN/Post mailer, Transaction Card or Transaction Card Package from the production process prior to its Release into the USPS Mailstream as requested by RCSI. This includes, but is not limited to, pull and destroy, pull and mail to a different address, or pull and mail overnight and is covered by billing element 7615.

(xxxv) “P.O. Returns” means mail returned from the USPS that was undeliverable to the addressee.

(xxxvi) “RCF Portfolio” means RCSI’s Retail Consumer Finance.

(xxxvii) ‘’RCSI Chip Personalization Parameters” mean the parameters and instructions provided by RCSI to First Data.

(xxxviii) “RCSI Rules” means RCSI’s directives, instructions and procedures as they change from time to time. To the extent that a change in the RCSI Rules would qualify as a New Production Service or as an RCSI-Initiated System Enhancement, such changes to RCSI Rules created after the Effective Date are subject to Section 3.7 of this Agreement.

 

 

Schedule A   A - 4    RCSI / First Data Confidential


Final Execution Version

 

(xxxix) “RCSI System” means the in-house data processing system of RCSI from which First Data will receive Print Production Services and Plastics Production Services transmissions.

(xl) “RFID” means radio frequency identification.

(xli) “RFID Card” means a plastic card which contains an embedded chip (sometimes referred to herein as “PayPass Chip”) and uses a contactless chip interface to communicate transactional data with a radio frequency reader.

(xlii) “Replacement Statement” shall mean a printed copy of the original Statement generated during normal Statement cycling.

(xliii) “Reprint” means a Statement, Letter, Other Correspondence, Transaction Card, Card Carrier, or other insert (either individually or at the job level) that has been re-printed after the initial print run due to damage (or other issue) caused during the initial Statement printing process within First Data.

(xliv) “Rerun” means any Paper Statements, Electronic Statement, Letter, Other Correspondence, Transaction Card, Card Carrier or other insert that has been identified as having incorrect data that will be or has been programmatically recomposed.

(xlv) “Same-Day Plastics” means those Transaction Card Packages required to be completed on the same Working Day, so long as First Data receives the Same-Day Plastics request by 3:00 ET p.m. on that Working Day. In the event that First Data does not receive the Same-Day Plastics request by 3:00 p.m. ET on that Working Day, First Data will mail the Same-Day Plastic on the next Working Day. For Same-Day Plastics processed on Saturday, if RCSI submits a Same-Day Plastics request prior to 10:00 a.m. ET, First Data will process such request on that same day (Saturday). All Saturday Same-Day Plastics requests submitted by RCSI after 10:00 a.m. ET on that Saturday will be processed by First Data on the next Working Day (Monday). Billing element 7678 covers this Production Service.

(xlvi) “SCS Services” means the suite of communication related services (the ‘Strategic Communications SolutionsSM (or SCS) Services’) composed of the following groups of services: Correspondence DirectorSM Services, IntelliColorSM Services, First Data DecisionQuest® Services, and eMessengerSM Services.

(xlvii) “Set-up” means any form dimensional or perforation dimensional configuration change.

(xlviii) “SF Portfolio” means RCSI’s Sales Finance Account portfolio.

(xlix) “Statement Package” means the entire package, inclusive of the printed Statement, inserts, and return and outer envelope.

(l) “Statement Production” means the process of receiving, printing, inserting, zip sorting and Releasing into the USPS Mailstream all Statements and Statement Packages.

 

 

Schedule A   A - 5    RCSI / First Data Confidential


Final Execution Version

 

(li) “Statements” means the monthly financial, billing and transaction summaries required by RCSI that notify a RCSI Customer or Cardholder or Affiliate of the status of the Account.

(lii) “Support Services” means non-standard Statement Production, Transaction Card Production and/or other activities or processes required to satisfy RCSI requirements or RCSI Customer requirements under this Agreement and are set forth in Section 6 of this Schedule A.

(liii) “Tap Test” means the testing performed by the USPS to verify compliance with USPS requirements.

(liv) “Transaction Card” means the embossed Cardholder plastic card which is used to execute transactions on an Account.

(lv) “Transaction Card Package” means the envelope and its contents which include the Transaction Card(s), Card Carrier and any related inserts.

(lvi) “Transaction Card Production” means the process of producing and processing all Transaction Cards.

(lvii) “WMS” means RCSI’s “Warehouse Management System” software as it exists by version, functionality and application.

(b) Capitalized terms used in this Schedule A are defined in the context in which they are used and shall have the meaning herein indicated. Capitalized terms not defined in this Schedule A shall have the meanings set forth in the text of this Agreement, its Schedules or its Exhibits. References to this Agreement shall mean the text of this Agreement and any and all Exhibits, Schedules, Attachments or Addenda thereto, as it may be amended from time to time. Unless otherwise provided to the contrary, any reference herein to a “Section,” or “Schedule” shall be deemed to refer to a Section of, or Schedule to, this Schedule A.

 

  1.3 Days of Coverage

First Data shall perform the Production Services in accordance with the following:

(a) First Data shall perform the Production Services related to Statements on Production Days (unless otherwise set forth in this Agreement).

(b) Unless otherwise set forth in this Agreement, First Data shall perform the following Production Services on Business Days:

(i) Transaction Card Production Services; and

(ii) All Print Production Services except the Production Services related to Statements.

(c) First Data shall perform the Production Services not set forth in Sections 1.3(a) and 1.3(b) on Working Days unless otherwise mutually agreed by the Parties.

 

 

Schedule A   A - 6    RCSI / First Data Confidential


Final Execution Version

 

2. DATA TRANSMISSIONS

(a) First Data shall provide most of the data used to perform the Production Services. However, during the Term, First Data will accept data transmission and file feeds from the RCSI System, RCSI, RCSI Customers, RCSI Affiliates and other third parties, as applicable, as may be required to provide the Production Services. To the extent the relevant files, feeds or transmissions of RCSI Data originate or are received by First Data from a system other than the First Data System, RCSI shall reasonably cooperate with First Data and coordinate with any RCSI Customers or other third parties as reasonably necessary to enable First Data to perform its respective work, which cooperation shall include:

(i) providing First Data such access to any relevant RCSI and RCSI Affiliate facilities from which such data is transmitted as is reasonably necessary for First Data to perform the relevant Production Services;

(ii) providing access to the RCSI System to the extent reasonably necessary for First Data to perform the Production Services and permitted under any underlying agreements with third parties; and

(iii) providing any other information that a person with reasonable commercial skills and expertise would find reasonably necessary for First Data to perform its work.

(b) First Data shall promptly notify RCSI if an act or omission of a third party or RCSI may cause a problem or delay in providing the Production Services, and RCSI shall use commercially reasonable efforts to work with First Data to prevent or circumvent such problem or delay.

(c) RCSI shall use commercially reasonable efforts to provide First Data with at least thirty (30) days advance notice, or such longer period of advance notice as may be reasonable under the circumstances, of changes to or affecting data transmissions or file feeds to the First Data System.

 

3. PRINT PRODUCTION SERVICES

 

  3.1 Basic Production Services for Statements and Letters

Subject to separate billing rules in accordance with the provisions of Schedule C, First Data shall perform the Basic Production Services for Statements and Letters (Billing Element Numbers 0601, 7471, 7801) which are:

(a) First Data shall receive, collect, organize, decipher and present (in tangible written form) print-ready data collected from the First Data System (as defined in the TSA), relevant RCSI systems or an equivalent third party source.

(b) From the data referenced in Section 2 above, First Data shall prepare the Statements, Letters and Other Correspondence in the format required by RCSI Rules (e.g., paper) in quantities and on the schedule as agreed by the Parties and subject to Section 3.5(h). The process for the printing and mailing of Paper Statements under this Section 3.1 is described in Exhibit A-1 to this Agreement. Based on RCSI Rules in each instance, First Data’s responsibilities shall include the following:

(i) Subject to the provisions of Schedule C, provide Statements, Statement Packages and Letters in accordance with the following specifications: 6 15/16 x 11 inch form stock, simplex, black and white, 20 or 24 lb paper, 20 or 24 lb envelopes, insert processing, outside envelopes and remittance envelopes for *** pages.

 

 

Schedule A   A - 7    RCSI / First Data Confidential


Final Execution Version

 

(ii) Obtain release from RCSI which RCSI will attempt to provide no later than 7:00 am ET prior to Statement, Statement Package, and Other Correspondence release into production of Statements, Statement Packages, and Other Correspondence. Regardless of whether First Data has received release from RCSI in accordance with this Section, First Data may begin the production process as of 7:00 a.m. ET.

(iii) Correct all errors in a timely fashion (which correction shall be at the sole cost of First Data in the event that any error is caused by First Data).

(iv) Print Statements, Letters and Other Correspondence (to the extent Other Correspondence is not supplied by third parties).

(v) Ensure form and Form Type compliance with First Data requirements as they may change from time to time; and

(vi) Subject to Section 3.1(b)(ii), provide RCSI with the opportunity for prior review and approval of Statements, Letters and Other Correspondence prior to Commingling, and subject to the requirements surrounding Holds in this Agreement.

(c) Based on RCSI Rules in each instance (and as required by RCSI) First Data shall perform the functions necessary to insert, sort, zip sort and Release into the USPS Mailstream all Statements, Letters and Other Correspondence. First Data’s responsibilities shall include the following:

(i) Review marketing and legal material received from RCSI, RCSI Affiliates or RCSI Customers (or their agents) to determine (in accordance with weight restrictions for mailings and RCSI Rules), whether and when such materials will be included in the applicable Statement, Letters and Other Correspondence mailings. RCSI will abide by the insert specifications provided to RCSI by First Data as of the Effective Date. The Parties will mutually agree to any material changes to the inserts specifications after the Effective Date, and neither Party will unreasonably withhold consent to such changes. First Data will use commercially reasonable efforts to accommodate exceptions to the insert specifications to the extent reasonably possible consistent with the Parties’ past practices prior to the Effective Date (including First Data providing feedback to RCSI if the inserts provided are not in compliance with First Data’s specifications).

(ii) Trim, burst, fold and insert Statements, Letters and Other Correspondence and other RCSI-approved materials into the correct envelopes in the order and priority required by RCSI Rules.

 

 

Schedule A   A - 8    RCSI / First Data Confidential


Final Execution Version

 

(iii) Supply and affix the required postage prior to zip sorting those envelopes being delivered to their respective intended recipients by the USPS or other non-USPS mail courier.

(iv) Seal and Release into the USPS Mailstream or release to the other non-USPS mail courier (in compliance with the time frames required by RCSI) envelopes containing Statements, Statement Packages, Letters and Other Correspondence and/or other RCSI-approved material that are to be delivered to their respective intended recipients by the USPS or other non-USPS mail courier.

(v) Confirm to RCSI Release into the USPS Mailstream, or other non-USPS mail carrier, of Statements, Statement Packages, Letters and Other Correspondence and associated materials.

(vi) In the event that any Statement, Statement Package, Letter, or Other Correspondence is returned to First Data by the USPS or any other non-USPS mail courier, First Data shall identify the appropriate Cardholder or RCSI Customer Account, notify RCSI that the Statements, Statement Package, Letters and Other Correspondence have been returned, and comply with RCSI Rules; and

(vii) Provide at least fourteen (14) pocket insert capability to support the *** Portfolio.

 

  3.2 SCS Services

(a) From the data referenced in Section 2 above, First Data shall prepare the Statements, Letters and Other Correspondence for SCS Services in the format required by RCSI Rules (e.g., paper) in quantities and on the schedule agreed by the Parties and subject to Section 3.5(h). The process for the printing and mailing of Paper Statements under this Section 3.2 is described in Exhibit A-1 to this Agreement.

(b) First Data shall in addition to the Basic Production Services for Statements and Letters set forth in Section 3.1 provide to RCSI a suite of certain communication related services (the “SCS Services”). The SCS Services shall be composed of the following groups of services as described below: Correspondence DirectorSM Services, IntelliColorSM Services, First Data DecisionQuest® Services, and eMessengerSM Services and are more fully described below.

(c) As of the Effective Date, First Data has not implemented the SCS Services for all the RCSI Customers and portfolios. First Data will implement the SCS Services in accordance with the timeframe and description set forth in Exhibit A-2.

(d) Attached as Exhibit A-3 is a sample page of a Statement produced as of the Execution Date on the Drop on Demand technology. The sample contained in Exhibit A-3 shall be the quality baseline for the output First Data produces from the Print Production Services after April 1, 2010. The Parties acknowledge that the appearance of any particular Statements, and as applicable Letters, will contain minor variations depending on the image being presented thereon. Except as otherwise provided in this Section, Exhibit A-3 is attached for example purposes only and its inclusion in this Agreement in no way alters

 

 

Schedule A   A - 9    RCSI / First Data Confidential


Final Execution Version

 

First Data’s obligations hereunder. The Parties acknowledge that the attached sample itself may degrade over time, and therefore, upon mutual agreement, the Parties may refresh the sample as necessary.

(e) Certain of the SCS Services have been bundled together for purposes of pricing in accordance with billing element 7814 (the “Basic Bundled SCS Statement and Letter Services”). Subject to separate billing rules in accordance with the provisions of Schedule C, First Data will perform the following Basic Bundled SCS Statement and Letter Services:

(i) First Data will print Statements and Letters using 6 15/16 x14 inch, white, 24lb bond MOCR paper, envelopes in approximately the following distribution: *** 20 lb, *** 24 lb, *** 28 lb envelopes.

(ii) Up to *** Form Types for Paper Statement Production are included in the Basic Bundled SCS Statement and Letter Services as of the Effective Date. First Data will also provide *** additional Form Type as part of the Basic Bundled SCS Statement and Letter Services for each new RCSI Customer portfolio added by RCSI after the Effective Date. RCSI and First Data will aspire to retain *** or less Form Types for Statements. There are no limitations on the number of Form Types for Letters or Other Correspondence. RCSI and First Data will aspire to retain approximately the number of Form Types for Letters as of the Effective Date or to the extent possible reduce the number of Form Types for Letters.

(iii) Duplex print for page one is included.

(iv) Print resolution will be a minimum of 360 x 360 DPI while running at the manufacturer’s then current recommended high-speed production speed. The Parties may mutually agree to change the production speed for the Production Services during the Term.

(v) As of April 1, 2010, these services include a four over one, color on front and black on back printing process. Print coverage on the front of the Statement will total 50%. Print coverage on the back will be black 15%. Coverage percentages are calculated based on uniform coverage over a page.

(vi) A single Setup consisting of two (2) perforation plates per page resulting the following perforation options per page: i) no perforations; ii) single perforation 3  12” from bottom; iii) two perforations 3  12” and 7” from top of page; iv) three perforations two perforations 3  12” and 7” from top and one perforation 3  12” from bottom of page.

(f) RCSI Portfolios Not on the First Data System (e.g.GECOM/Prox Portfolio/CARMS) SCS Services Requirements

(i) RCSI will send a raw data file containing variable data to First Data for the creation of the Letter production file and Statement file.

(ii) Statements and Letters will be composed by First Data on the Correspondence DirectorSM platform.

 

 

Schedule A   A - 10    RCSI / First Data Confidential


Final Execution Version

 

(g) SCS Services Proofing and Testing Support

(i) For the RCF Portfolio and the SF Portfolio Prebill and checker files:

(A) First Data will make the prebill file and the checker file available in color for RCSI to approve.

(B) First Data will store such prebill and checker files in AFP for sixty (60) days.

(C) For Rerun files, First Data will make the Rerun checker file available in color for RCSI to approve.

(D) First Data will store such Rerun checker files for sixty (60) days in AFP in accordance with the TSA.

(ii) For SF Portfolio Statements, First Data will send RCSI an electronic copy of the images and logos for RCSI to proof and approve.

(iii) For the RCF Portfolio Statements, First Data will send RCSI a printed color Statement, rendered in a similar color quality as the color printer used in production, for RCSI to approve. RCSI may request to have the RCF Portfolio’s image and logo proofs printed on the Business Color Proofer and sent to RCSI to approve. The Business Color Proofer resides in the First Data Image Composition Group and renders a similar color quality output of the image as the color printer.

(iv) The Parties will mutually agree to any changes to the processes set forth in this Section. Proofing requirements other than those set forth in this Agreement or otherwise mutually agreed to will be billable to RCSI at the contractual programming rate as set forth in Schedule C.

(v) Test or production samples developed specifically for RCSI will not be provided to current First Data clients or future prospects of First Data without the prior written approval of RCSI.

(h) Scanning and Overlay Specialists (SOS)

(i) RCSI shall submit all images and logos (black & white and color) to be scanned and given image IDs to First Data in a format compliant with First Data’s specification guidelines as of the Effective Date. All changes to First Data’s specifications after the Effective Date will be mutually agreed by the Parties.

(j) eMessenger Services

(i) First Data shall perform the eMessenger Services as of the Effective Date in accordance with billing elements 4726, 4730, 4732, 4733, and 4738 as provided in Exhibit C-4 to Schedule C.

(ii) Electronic eMessenger Statement “Soft/Hard Bounce” Process

 

 

Schedule A   A - 11    RCSI / First Data Confidential


Final Execution Version

 

With respect to Electronic Statements in the event of a Soft or Hard Bounce, the following applies:

(A) In the event of a Soft Bounce, which means that the receiving email server (i.e. Yahoo) returned an error message, which may be due to several things including a server issue or no room in the receiver’s “inbox” (“Soft Bounce”), First Data will attempt to deliver messages that have experienced a Soft Bounce in intervals of twelve (12) hours for three (3) attempts. If a message Soft Bounces three (3) times, it is then treated as a Hard Bounce.

(B) A “Hard Bounce” is a message that has (i) experienced a Soft Bounce three (3) times; or (ii) a message that cannot be delivered due to an invalid email address. When a Hard Bounce occurs, First Data sends a letter to the Cardholder that informs the Cardholder that they are being un-enrolled for Electronic Statement delivery.

(C) After a Hard Bounce, First Data then sends the Statement to the next available print cycle for print and mail. Day Zero begins when the Electronic Statement enters the print cycle for production.

 

  3.3 Specific Requirements Regarding Letters

(a) First Data will provide full color printing on the front side of the page for Letters printed under the SCS Services.

(b) For Letters on the ABC and Crown platforms, First Data will print logos in color.

(c) First Data will generate Collection Letters and mail them via USPS certified mail via the USPS.

 

  3.4 Print Production Services Inventory.

(a) Print Production Services Inventory Management.

(i) As requested by RCSI (and pursuant to RCSI Rules) First Data shall provide inventory management (including secure and proper handling thereof) of Statements, Letters and Other Correspondence and the insert materials, forms and envelopes. “Inventory Management” means First Data receiving materials, performing quality checks of materials, weighing, counting, and tracking materials, and recording the storage location and type of materials.

(ii) As part of its Inventory Management functions, First Data shall inventory all materials sent out and received by First Data.

(iii) First Data will maintain an inventory of all Active Collateral used by First Data during the previous calendar month. First Data will conduct a *** audit of the Active Collateral inventory within ten (10) Production Days of the expiration of the previous calendar month, and First Data will provide RCSI with a report upon completion of the ten percent (10%) audit.

 

 

Schedule A   A - 12    RCSI / First Data Confidential


Final Execution Version

 

(iv) *** Inventory. If First Data exhausts the allotted *** inserts in the middle of a production cycle, First Data shall complete the remainder of that *** production cycle without including the exhausted inserts in the *** Statement Package for that cycle. During the following production cycle(s), in the event that there are excess *** inserts remaining in the inventory, First Data will exhaust the remaining *** inserts supply.

(v) First Data shall make available to RCSI on-line inventory management reports for Statements, Letters and Other Correspondence insert materials, forms and envelopes. To the extent reasonably possible First Data shall use available WMS functionality as of the Effective Date to support the on-line inventory.

(b) Print Services Inventory Procurement.

As requested by RCSI (and pursuant to RCSI Rules) First Data shall order and stock materials required for Statement, Letters and Other Correspondence production, including envelopes and paper, so that there is a sufficient supply available at all times to perform the Production Services.

(c) Obsolete Print Services Inventory.

(i) On a rolling six (6) month calendar basis beginning on the Effective Date, First Data shall conduct a complete inventory of any materials that have not been used by First Data during the past six (6) calendar months (“Inactive Collateral”), and First Data will provide RCSI with a report upon completion of the inventory. Test samples, scrap inventory adjustments, or items shipped to RCSI will not be considered a production issuance for determining whether stock is Inactive Collateral.

(ii) First Data shall, at its own expense, dispose of any Inactive Collateral resulting from the routine course of production.

(iii) Once an inventory item has been identified as being Inactive Collateral, First Data will notify RCSI to determine whether the item should be destroyed or shipped to RCSI or an RCSI Customer. RCSI shall respond to First Data within thirty (30) days of the receipt of the notice. First Data must destroy or ship any Inactive Collateral within thirty (30) calendar days of such notification to destroy or ship by RCSI.

 

  3.5 Other Print Production Services

(a) Replacement Statements

Upon request by RCSI, First Data will prepare, print and Release into the USPS Mailstream Replacement Statements. Replacement Statements will be printed in black and white. Such Replacement Statements will also be stored as black and white on AFP OnDemand.

 

 

Schedule A   A - 13    RCSI / First Data Confidential


Final Execution Version

 

(b) Document Archival

Until such time as the Parties execute a statement of work, amendment or other written document addressing new document archival functionality, in accordance with the TSA, First Data will use the AFP OnDemand product and functionality existing as of the Effective Date for document archival purposes under this Agreement.

(c) MICR Usage for Checks, Coupons, and Other Correspondence.

(i) First Data shall perform Magnetic Ink Character Recognition (MICR) printing for Checks, Coupons, and Other Correspondence. IntelliColorSM Services support the use of spot MICR. RCSI and First Data will mutually agree on a signal strength range. More than 8 million MICR items in a month will incur an additional fee at the charge set forth in Schedule C.

(ii) Additionally, First Data currently provides IntelliColorSM unique security features of void pantograph and microprint lines for Checks. This is in addition to Account number verification, amount in words legal amount field, Check digit validation, colored ink, decorative border, document fraud deterrent icon, embedded data and magnetic ink. As additional security technology becomes available for this process, the Parties may, upon mutual written agreement, incorporate such technology into the Production Services.

(d) Reprints.

(i) First Data will communicate the problem potentially necessitating a Reprint to the RCSI Production team, who will determine whether the Statement, Letter or Other correspondence can be Released into the USPS Mailstream.

(ii) If RCSI determines that the Statement, Letters, or Other Correspondence do not conform to the RCSI Rules, the previously printed Statement, Letters and Other Correspondence will be identified, re-spooled, re-printed and mailed.

(iii) First Data will complete a Root Cause Analysis with corrective action taken.

(iv) Color and black and white Statements and MICR color and black and white Statements damaged during the production process will be reprinted no later than with the next day’s production work at no additional charge to RCSI.

(v) Color and black and white Statements with no MICR will be reprinted in color or black and white, depending on the original set-up of the Statement. Color and black and white Statements with MICR will be reprinted in black & white MICR toner.

(e) Reruns.

(i) RCSI Rules determine when Statements, Letters and Other Correspondence must be re-run.

(ii) A Rerun scenario may occur both prior to Statements being launched to print or after they are in production.

 

 

Schedule A   A - 14    RCSI / First Data Confidential


Final Execution Version

 

(iii) With consensus of the First Data and RCSI, First Data will re-schedule all of the necessary work in to the production platform for it to be re-processed, re-printed, inserted and Released into the USPS Mailstream with the earliest possible cycle/mail date.

(iv) First Data will complete a Root Cause Analysis with corrective action taken.

(v) Color Statements and MICR color Statements damaged during the production process will be reprinted no later than with the next day’s production work at no additional charge to RCSI.

(vi) Color statements with no MICR will be reprinted in color. Color Statements with MICR will be reprinted in black & white MICR toner.

(f) First Data will work with RCSI to aspire to retain approximately the number of insert strategies as of the Effective Date or to the extent possible reduce the number of insert strategies (excluding inserts provided by third parties).

(g) Convenience Checks. First Data will print and mail convenience Checks as part of the Production Services.

(h) In the event of ad hoc unique special mailings, the Parties will mutually agree on format, quantity and timeframe.

(i) Paper and Envelopes

(i) After First Data converts to the Drop on Demand technology, RCSI may elect to use any paper within the weight range of *** pounds for Print Production Services, subject to First Data’s reasonable review, testing, and acceptance of such testing results (which results shall not be unreasonably rejected by First Data). First Data testing includes testing on all equipment (i.e. print, insertion and zipsorting equipment) and processes potentially affected by any change in paper weight. First Data will perform such testing at no additional charge.

(ii) RCSI may elect to use envelopes weighted at *** pounds subject to First Data’s reasonable review, testing, and acceptance of such testing results (which results shall not be unreasonably rejected by First Data). First Data testing includes testing on all equipment (i.e. print, insertion and zipsorting equipment) and processes potentially affected by any change in envelope type. First Data will perform such testing at no additional charge.

(iii) First Data will use commercially reasonable efforts to accommodate RCSI’s requests for changes to paper weight and envelope type during the Term. First Data will allow reasonable access to industry experts and/or consultants to review and test the equipment and processes.

 

 

Schedule A   A - 15    RCSI / First Data Confidential


Final Execution Version

 

4. PLASTICS PRODUCTION SERVICES

 

  4.1 Basic Production Services for Embossing

First Data shall perform the Basic Production Services for Embossing (Billing Element Number 7473) which are:

(a) Transaction Card Production, Insertion and Distribution.

First Data shall:

(i) Receive and inspect all plastics required in Transaction Card Production.

(ii) Notify suppliers, and obtain replacements or credits for, plastics that do not meet the applicable specifications. Custom materials may be ordered with RCSI’s approval pursuant to plastic proof or RCSI may order its own plastics.

(iii) Collect, organize and present (including embossing tapes) the necessary emboss-ready data collected from the First Data System (as defined in the TSA), the RCSI System or an equivalent third party source, including any relevant electronic Transaction Card files from RCSI or RCSI Affiliates and any other files containing information concerning production of the Transaction Cards.

(iv) Accurately and timely emboss Transaction Cards, including adding text, numbers and logos in compliance with RCSI’s specifications and approved embossing parameters.

(v) Accurately and timely encode Transaction Cards.

(vi) Accurately and timely print required Cardholder information on Card Carriers.

(vii) Provide design support, including support related to magnetic strip parameters.

(b) Based on RCSI Rules in each instance, First Data shall perform all functions necessary to insert, sort, mail and timely, reliably and accurately deliver to their intended recipients Transaction Card Packages and related materials. First Data’s responsibilities shall include the following:

(i) Print and fold Card Carriers.

(ii) Data match Transaction Cards and the Card Carriers.

(iii) Insert and append Transaction Cards onto the corresponding Card Carriers.

(iv) Insert the Card Carriers (and affixed Transaction Cards) and other RCSI-approved materials into the correct envelopes in the order and priority required by RCSI Rules to create the Transaction Card Package..

 

 

Schedule A   A - 16    RCSI / First Data Confidential


Final Execution Version

 

(v) Supply and affix the required postage and zip sort for those Transaction Card Packages being delivered to their respective intended recipients by the USPS or other non-USPS mail courier.

(vi) Seal and Release into the USPS Mailstream the Transaction Card Packages and/or other RCSI approved material that are to be delivered to their respective intended recipients by the USPS or other non-USPS mail courier.

(vii) Confirm delivery to the USPS, or other non-USPS mail carrier, of the Transaction Card Packages and associated materials.

(viii) In the event that any Transaction Card Package is returned to First Data by the USPS or any other non-USPS mail courier, First Data shall identify the appropriate Cardholder or RCSI Customer Account, notify RCSI that the Transaction Card Package has been returned, and comply with any other relevant RCSI Rules.

 

  4.2 Other Plastics Production Services

In addition to the Basic Production Services for Embossing, First Data shall perform the following additional Plastics Production Services:

(a) Accurately and timely include and print the CVV number on the reverse side of the Transaction Card.

(b) Accurately and timely produce replacement, duplicate, and secondary cardholder Transaction Cards charged on a per plastic basis (as and when requested by RCSI) and mail such Transaction Cards to the specified address set forth in the request.

(c) Perform (as requested by RCSI or in the RCSI Rules) services respecting the following: ultragraphic/graphic imaging, card labeling (including activation labels), card mailers, Rush Plastics and Same-Day Plastics, PIN mailers and card pulls.

(d) As applicable per RCSI Rules or as instructed by RCSI, match photo supplied in data files with the single photo upon the Transaction Card.

(e) Perform Mass Re-Issues in accordance with the RCSI Rules. “Mass Re-Issue” means Transaction Card Packages that are force triggered by RCSI and not automatically triggered by the First Data System, the RCSI System or Commingled with daily Transaction Cards, and require a capacity reservation form for production scheduling and a project request for any design changes needed to facilitate the production.

 

  4.3 PayPass Plastics Services for the *** Program

(a) In connection with the *** Program, First Data shall provide RCSI with card personalization, Chip Personalization and other related services (hereinafter referred to as the “PayPass Plastics Services”).

(b) First Data will perform the PayPass Plastics Services for the *** Program, including the following:

(i) Chip Personalization of the RFID Cards pursuant to the RCSI Chip Personalization Parameters, RCSI’s designs and instructions, and the PayPass Specifications, which are provided in Exhibit A-5.

 

 

Schedule A   A - 17    RCSI / First Data Confidential


Final Execution Version

 

(ii) Cryptography Services:

(A) ***

(B) ***

(C) ***

(iii) Key Management Services:

(A) ***

(B) ***

(C) ***

(D) ***

(c) Plastic card fulfillment for PayPass Plastics Services shall be provided through First Data’s PEP system, using PEP card carriers.

(d) First Data shall not, in connection with PayPass Plastics Services for the *** Program, be required to provide Chip Personalization Services for monthly RFID Card volumes in excess of 350,000, unless otherwise mutually agreed upon in writing by the Parties. RCSI shall in any event comply with First Data’s existing capacity reservation processes in connection with its use of the PayPass Plastics Services to the same extent that RCSI is so required to comply with such capacity reservation processes in connection with mag-stripe plastics.

(e) Hand Emboss Services and Photocard Services are not available in connection with the PayPass Plastics Services.

(f) First Data shall be responsible for damage to RFID Cards, solely for volumes in excess of three percent (3%) of the total volume of RFD Cards with respect to which First Data provides PayPass Plastics Services to RCSI hereunder, and solely to the extent such damage occurs while such RFID Cards are in First Data’s possession. Any such damaged RFID Cards shall be shredded by First Data pursuant to the terms set forth in the PSA. In no event shall First Data be responsible for any damage to any RFID Cards following their removal from First Data’s facilities.

 

  4.4 Transaction Card Natural Re-Issue

For Natural Reissue Plastic (PLCC and DC portfolios utilizing plastic expiration date logic) production, First Data will perform the following:

(a) On day one (1) of the month prior to the month of the expiration date of a Transaction Card, the mainframe creates an embossing file with all Accounts that “qualify” for reissue.

 

 

Schedule A   A - 18    RCSI / First Data Confidential


Final Execution Version

 

(b) Qualification is determined by RCSI driven PCF and Rules setting.

(c) At a minimum this file will be segmented into four (4) separate embossing tapes of an equal proportion.

(d) At the beginning of each week, during the month prior to the month of the expiration date of a Transaction Card, these separate embossing tapes will be launched into production.

(e) Each embossing tape will be completely produced and mailed with fifteen (15) calendar days or ten (10) Business Days, whichever is greater, with a commitment that First Data will produce and mail all reissue packages by the last day of the month prior to the month of the expiration date of a Transaction Card.

 

  4.5 Plastics Production Services Inventory.

(a) Plastics Services Inventory Management.

(i) As requested by RCSI (and pursuant to RCSI Rules) First Data shall provide Inventory Management (including secure and proper handling thereof) of plastics and Transaction Cards, Card Carriers, envelopes, forms and related insert material.

(ii) As part of its Inventory Management functions, First Data shall inventory all materials sent out and received by First Data.

(iii) First Data will maintain an inventory of all Active Collateral used by First Data during the previous calendar month. First Data will conduct a *** audit of the Active Collateral inventory within ten (10) Production Days of the expiration of the previous calendar month, and First Data will provide RCSI with a report upon completion of the *** audit.

(iv) First Data shall make available to RCSI on-line inventory management reports for Transaction Cards, plastics, insert materials, forms and envelopes. To the extent reasonably possible First Data shall use available WMS functionality as of the Effective Date to support the on-line inventory.

(b) Plastics Services Inventory Procurement.

As requested by RCSI (and pursuant to RCSI Rules) First Data shall order and stock materials required for plastics, Card Carriers, envelopes, forms and related insert material, so that there is a sufficient supply available at all times to perform the Production Services. RCSI agrees to provide First Data with special order quantities for new portfolio setups, dailies, natural re-issues, Mass Re-issues, flips and other one-time projects as requested by RCSI.

 

 

Schedule A   A - 19    RCSI / First Data Confidential


Final Execution Version

 

(c) Obsolete Plastics Services Inventory.

(i) On a rolling six (6) month basis beginning on the Effective Date, First Data shall conduct a complete inventory of the Inactive Collateral related to the Plastics Production Services, and First Data will provide RCSI with a report upon completion of the audit. Test samples, scrap inventory adjustments, or items shipped to RCSI will not be considered a production issuance for determining whether stock is Inactive Collateral.

(ii) First Data shall, at its own expense, dispose of any Inactive Collateral resulting from the routine course of production.

(iii) Once an inventory item has been identified as being Inactive Collateral, First Data will notify RCSI to determine whether the item should be destroyed, shipped to RCSI or an RCSI Customer, or whether RCSI would like First Data to arrange for storing such items for future use. RCSI shall respond to First Data within 30 days of the receipt of the notice. First Data must destroy or ship any Inactive Collateral within thirty (30) calendar days of such notification to destroy by RCSI.

 

  4.6 Digital Card Print Services.

(a) First Data will provide RCSI with digital card print services in connection with the Plastics Production Services (the “Digital Card Print Services”). The Digital Card Print Services shall include receipt by First Data of various digital images or marks from RCSI or third parties as contracted by RCSI, First Data’s preparation of the submitted images or marks for card application, and First Data’s application of such digital images or marks to plastic stock on an as-needed basis. Digital Card Print Services shall be performed in accordance with the description of services set forth in Schedule C of this Agreement at the rates set forth therein.

(b) First Data will provide PlastiCard Image Management, which is the acceptance and management by First Data of each remotely scanned image for use on the First Data PlastiCard Custom Services Imaging Center database to be used for digitizing on a “white” plastic. The service includes storage of scanned images for up to five (5) years. This is a one-time fee assessed when First Data receives the image and can be used for replacement cards, account transfers, etc.

(c) First Data will prepare digital images and apply each stock level digitally prepared image edge-to-edge on a Transaction Card. The service includes a CardGuard seal over the digital image. Application of each Cardholder level digitally prepared image edge-to-edge on a Transaction Card and includes a CardGuard seal over the digital image.

 

5. TECHNOLOGY USED TO PERFORM THE PRODUCTION SERVICES

 

  5.1 Print Production Services

(a) As of the Effective Date, First Data shall continue to utilize its technology used prior to the Effective Date to print Statements, Letters and Other Correspondence.

(b) In accordance with Section II of Exhibit A-2, First Data will implement by April 1, 2010 Drop on Demand technology using variable drop size technology (or its equivalent) in order to perform the Print Production Services.

 

 

Schedule A   A - 20    RCSI / First Data Confidential


Final Execution Version

 

(c) First Data shall (i) ensure that no *** Statements, Letters, and Other Correspondence are produced using two different technologies at all times during the Term; and (ii) make commercially reasonable efforts to produce the non-*** RCSI Customer Statements, Letters, and Other Correspondence for an individual RCSI Customer on a single technology at all times during the Term.

 

  5.2 Plastics Production Services

As of the Effective Date, First Data shall continue to utilize its technology, subject to Section 6.4(b), used prior to the Effective Date to perform the Plastics Production Services.

 

6. SUPPORT SERVICES

 

  6.1 Introduction

Based on RCSI Rules in each instance, First Data shall perform the functions necessary to support the Production Services specified by RCSI (“Support Services”). First Data’s responsibility shall include the following Production Services provided in this Section 6:

 

  6.2 Perform Quality Checks and Reviews of Production Output of Transaction Cards, Letters, Statements and Other Correspondence.

(a) First Data shall perform quality checks and reviews of production output of Transaction Cards Packages, Statement Packages, Letters, Statements and Other Correspondence as reasonably requested by RCSI. Such quality checks include: the quality sampling included in Exhibit B-1 (Service Level Metrics), pre-production sampling and quality reviews, and other quality checks as agreed by the Parties.

(b) First Data will provide scanned images to RCSI for RCSI internal audit upon request by RCSI.

 

  6.3 RCSI Customer Requirements

Certain RCSI Customers have unique production and processing requirements and First Data shall perform the functions necessary to support the Production Services (as specified by RCSI) for such RCSI Customers from time to time.

 

  6.4 Mail Tracking and Barcoding

(a) First Data will perform mail tracking Production Services, including:

(i) Track all mail at the Account level; and

(ii) Provide the Account number for all tracked mail that has missed the 2 Day SLA to RCSI within five (5) Production Days of not achieving the two (2) day Statement Cycle Time.

(b) First Data will perform the following functions with regard to barcoding:

(i) First Data will implement in accordance with Exhibit A-2 the technology referenced in this Section 6.4(b) by April 1, 2010.

 

 

Schedule A   A - 21    RCSI / First Data Confidential


Final Execution Version

 

(ii) First Data will utilize camera technology that reads barcodes placed on materials and interfaces with a control file. Through reading and tracking the barcoding on selected materials, First Data will track and validate that the correct materials are being utilized in performing the Production Services.

(iii) For items procured by First Data, First Data will print two dimensional barcodes onto forms (excluding white forms), Card Carriers, envelopes and inserts.

(iv) For items not printed by First Data, RCSI will print the two dimensional barcode onto the items which barcodes comply with First Data requirements that have been made known to RCSI as of the Effective Date. Any changes to these requirements shall be mutually agreed by the Parties.

(v) First Data will scan the two dimensional barcodes that comply with First Data requirements that have been made known to RCSI as of the Effective Date onto forms (excluding white forms, which will only contain the inserting machine instruction barcode), Card Carriers, envelopes and inserts. Any changes to these requirements shall be mutually agreed by the Parties.

(vi) First Data will create and maintain a control file that contains RCSI’s requirements for inserts included on the bill of materials.

(vii) Insert machines at all First Data facilities from which First Data is providing the Production Services will have cameras mounted on the portions of the stations that pull material and scan the barcodes. In the event that the information obtained from the scanned barcode does not match the information contained in the control file, First Data will Hold the production process, will intervene manually, and will resolve the mismatched production error. First Data will restart the production process upon resolution of the issue identified during the barcoding process.

(viii) Print engines have cameras mounted on each engine or within the paper path as determined adequate for each hardware type.

(ix) Manual processing procedures will require validation via handheld scanners. These processes will be evaluated over time and may be adjusted as mutually agreed by the Parties.

 

  6.5 POSTAGE RELATED SERVICES

(a) First Data shall comply with all USPS mailing requirements (e.g. Tap Test requirements).

(b) First Data shall Commingle the mail for Print Production Services related mail and Plastics Production Services related mail for RCSI as well as First Data’s other clients’ white mail.

 

 

Schedule A   A - 22    RCSI / First Data Confidential


Final Execution Version

 

(c) First Data shall maintain or improve the discount, mailing, distribution or other agreements with USPS or other non-USPS mail couriers, including but not limited to CASS Certification subject to the other provisions of this Section 6.5 and Section 3 of Schedule C (Postage).

(d) First Data shall perform marketing and postal weight management-related services in accordance with the instructions from First Data Decision Quest Services or other applicable decision or instruction tool services. Such services shall include (i) accepting inputs of 0.001 ounce increments for the fields and associated calculations for Statement component weights, and (ii) utilizing *** ounces as the set point for maximum fulfillment package weight before transitioning from USPS 1 ounce mail rate to the USPS 2 ounce mail rate for all RCSI Customers except for ***, which shall operate at *** ounces.

(e) First Data shall perform *** seven (7) day Mail pass for the Print Production Services excluding the First Data Holidays. First Data shall perform *** six (6) day Mail pass for Plastics Production Services, excluding Sundays and First Data Holidays. This Section is subject to the regulations, laws and rules governing the USPS and its mail acceptance.

(f) Either Party shall have the right to reject any proposed envelope design which will violate applicable USPS regulations.

(g) First Data shall provide RCSI with the ability to track postage costs incurred at the RCSI client level.

 

  6.6 Design Support Services

First Data will perform the following design Support Services:

(a) Provide design support for Statement, Letters, Other Correspondence Form Types.

(b) Provide design support for Transaction Card and Card Carriers.

(c) Implement and execute at least *** of all SOS image and PEP template M cycle proofs within five (5) Working Days from the time set up is complete in M cycle.

 

  6.7 PROBLEM MANAGEMENT SERVICES

(a) General First Data Responsibilities.

First Data shall identify, track and manage the problems arising from or relating to the Production Services (“Problem Management” and “Problem Management Services”). First Data shall implement and maintain processes and procedures under which a single point of contact has end-to-end responsibility for each problem arising from or relating to the Production Services in order to minimize redundant contacts with RCSI. First Data shall provide to RCSI a copy of the Problem Management policies and procedures.

 

 

Schedule A   A - 23    RCSI / First Data Confidential


Final Execution Version

 

(b) Specific First Data Responsibilities.

(i) First Data’s responsibilities with respect to Problem Management Services shall include the following:

(A) Identifying, resolving, and performing a Root Cause Analysis of all problems within five (5) Working Days of First Data’s receipt of notice of the problem;

(B) Logging reported problems upon receipt from RCSI (or its third party providers) as identified by First Data;

(C) Monitoring, controlling and managing each problem arising from or relating to the Production Services until it is corrected or resolved to the satisfaction of RCSI;

(D) Correcting or resolving all problems relating to the Production Services in the times set forth by RCSI (problem corrections will be subject to verification by the authorized RCSI affected end user or control person) (correcting First Data-caused errors at First Data’s expense);

(E) Adhering to the procedures for problem escalation, review and reporting as agreed upon by the Parties and also taking appropriate measures to avoid recurrence of problems; and

(F) Monitoring, measuring and providing reports in the format required by RCSI related to problems, including statistics on the types of problems, total number of problems, outstanding problems and resolution times (including the average time to resolve problems) for the Production Services in general, for specific portions of the Production Services, and for individual RCSI Affiliates and RCSI Customers.

(ii) First Data shall maintain on-going communication with RCSI with respect to the problems from notification through until final resolution. First Data shall, for each problem, provide prompt notification to RCSI of system outages or processing delays and shall otherwise provide regular and timely progress updates that clearly indicate the nature of the problem, the estimated time to correction, and potential short-term alternatives. First Data shall make known to RCSI information regarding the status of significant problems on at least a daily basis (or more frequently as appropriate). First Data shall track and report any backlog of unresolved problems.

(iii) First Data shall engage and manage third party First Datas and vendors as necessary to localize and resolve problems that arise from or relate to the Production Services consistent with the RCSI Vendor Material Guidelines.

 

  6.8 DISASTER AND BUSINESS RECOVERY

(a) General

First Data shall perform the following functions regarding disaster recovery for the Production Services:

(i) First Data shall provide RCSI a synopsis of its Production Services disaster recovery plan and will implement the plan as required by the plan. In the event that any of the terms of First Data’s Production Services disaster recovery plan conflict with the terms of this Agreement, the terms of this Agreement shall control.

 

 

Schedule A   A - 24    RCSI / First Data Confidential


Final Execution Version

 

(ii) First Data shall provide support (as reasonably requested by RCSI) to meet RCSI’s disaster recovery and business recovery requirements. In connection with that support, First Data shall participate (as required by RCSI) in RCSI disaster recovery tests. First Data will use reasonable efforts to accommodate RCSI’s disaster recovery and business recovery requirements. To the extent there are requirements First Data cannot accommodate, First Data will make reasonable efforts to find alternative solutions.

(iii) If such requirements and related accommodations would require system modifications or provision of unique services, such modifications or services may be considered New Production Services or RCSI-Initiated System Enhancements, if and as applicable.

(iv) In the event of a disaster event ***

(v) In the event of a disaster event or Outage at either (but not both) First Data output print and mail facility in Omaha:

(A) First Data will recover the impacted site’s production volume at the alternate Output location in order to commence provision of Production Services within ***. To the extent applicable, such services remain subject to Section 16.3 (Force Majeure) of the Agreement, including with respect to performance of Service Levels.

(B) First Data will implement a 24x7 work schedule that supplements the operations staff during breaks and lunches so that production equipment will only stop for required maintenance.

(C) First Data will redirect the necessary files from the host to the alternate Omaha site.

(D) First Data will create and substitute with generic materials if an adequate supply of the custom stock is not immediately available at the alternate site from off-site storage.

(E) First Data will include regulatory inserts if they are available at the time of the insertion process.

(F) First Data has assumed that a disaster will occur during one shift, so First Data will supply approximately two-thirds of the impacted site’s staffing to staff the alternate site’s work force.

(G) First Data will provide transportation to the alternate site if necessity dictates.

 

 

Schedule A   A - 25    RCSI / First Data Confidential


Final Execution Version

 

(vi) In the event that there is a disaster event that impacts both print facilities in Omaha, First Data has *** will make commercially reasonable efforts to restore the Production Services in accordance with Section 16.3 of this Agreement.

(vii) In the event there is a disaster event at either (but not both) First Data plastics facility:

(A) First Data will recover the impacted site’s production volume at the alternate output location in order to commence provision of Production Services within ***. To the extent applicable, such services remain subject to Section 16.3 (Force Majeure) of the Agreement, including with respect to performance of Service Levels.

(B) First Data will implement a 24x7 work schedule that supplements the operations staff during breaks and lunches so that production equipment will only stop for required maintenance.

(C) First Data will redirect the necessary files from the host to the alternate site.

(D) Marketing materials will not be included plastics mailings.

(E) The alternate production site will support standard embossing services, prioritized by Same Day Plastics, Automatic Rush Embossing, dailies, and natural reissues. One time Mass Re-Issues will be prioritized as mutually agreed.

(viii) In the event that there is a disaster event that impacts both plastics facilities, First Data has *** will make commercially reasonable efforts to restore the Production Services in accordance with Section 16.3 of this Agreement.

(b) Disaster recovery for SCS Services:

(i) First Data will test secondary color printing equipment located in an alternate First Data facility with RCSI printing once per year to validate that the alternate color printing equipment maintains proper disaster recovery functionality. First Data will provide these test results to RCSI no later than five (5) Business Days after completion of the test.

(ii) If, as a result of an Outage, First Data has reduced capacity on the color printers First Data uses to provide SCS Services for RCSI, First Data may print certain RCSI portfolios in black and white in accordance with Section 6.8(b)(ii)(D) during the time period from the occurrence of the Outage until such Outage is cured and color printing at full capacity resumes (the “Outage Cure Period”), then

(A) First Data’s standard black and white pricing under Schedule C of this Agreement shall apply, and

 

 

Schedule A   A - 26    RCSI / First Data Confidential


Final Execution Version

 

(B) Black and white Statements and Letters printed under this Section will be charged as a Basic Bundled SCS Statement and Letter Service charge.

(C) In no event will e-Messenger services or deliverables (and associated e-Messenger Pricing) be impacted as a result of an Outage.

(D) RCSI may ***

(iii) SCS Service Interruption Plan

First Data shall notify RCSI within six (6) hours of the occurrence of any outage affecting normal production procedures, including any service interruption to the color printer or unexpected downtime that jeopardizes Service Levels or legal regulatory turnaround times (an “Outage”). After discussion and review, a decision regarding the appropriate actions to take to address the Outage (e.g., whether to hold Statements or print in black and white, timing parameters, etc.) will be made by RCSI and communicated to First Data, and First Data will abide by RCSI’s instructions so communicated. Within five (5) Business Days of an occurrence of an Outage, First Data will furnish RCSI with a detailed description of the Outage, including its root cause and impact, and provide such other information relating thereto as RCSI may reasonably request. The term “Outage” shall not be construed to include capacity issues or concerns, and no service interruption to the color printer or downtime shall be permitted due to such issues or concerns provided RCSI provides appropriate capacity reservation documentation. Capacity of equipment shall not affect the printing of color Statements and First Data shall not substitute black and white Statements on that basis.

 

  6.9 TRAINING

First Data shall provide training in accordance with the Production Services. Such training includes First Data’s online computer-based training, product training, and Fast Data training. Production Services training hours utilized are subject to the TSA pool of training hours set forth in Section 14 of Schedule C of the TSA.

 

7. ANCILLARY SERVICES

 

  7.1 Introduction

If during the Term, RCSI requests an Ancillary Service, upon the provision of such Ancillary Service to RCSI, such service will be deemed a Production Service and shall, pursuant to Schedule C-4 to Schedule C, be subject to the provisions of this Agreement.

 

 

Schedule A   A - 27    RCSI / First Data Confidential


Final Execution Version

 

  7.2 Ancillary Services Related to Print Production Services

First Data shall provide any of the Ancillary Services related to Print Production Services as of the Effective Date at the charges set forth in Exhibit C-4. Below are additional descriptions of certain of the Ancillary Services that have been used most frequently prior to the Effective Date that relate to Print Production Services:

 

Billing
Element

  

Title

  

Description of the Ancillary Service

0622    Remittance Envelopes    This element identifies the charge for the envelope enclosed with the Statement to be used by the customer to remit payment.
4306    First Data Contractual Credits/Debits    This element identifies credit items owed to RCSI and various debit items (if any) are owed to First Data pursuant to this Agreement.
4369    Rebill Forms / Envelopes    This element identifies the charge for forms and envelopes purchased by First Data on RCSI’s behalf.
4398    Miscellaneous    This element identifies the charge for nontaxable miscellaneous charges in accordance with the course of dealing of the Parties prior to the Effective Date or as otherwise mutually agreed by the Parties.
4423    Statements - Paper Rebill    This element identifies the charge for paper used to create RCSI Statements that is purchased by First Data.
4705    Color Duplex-Black on Back 14”    This element identifies the charge for business inkjet color printed on the front side and black on the back side of a 14” x 6 15/16” or 14” x 8 1/2” form. This fee is incremental to black and white printing and mail preparation services. This charge does not include paper.
4713    Paper Quality 3    This element identifies the charge for treated grade 2 paper for color printing of documents. This charge is based on RCSI form’s dimensions.
4720    Correspondence Director    This element identifies the charge for each document composed using the Correspondence Director product. This charge is incurred for documents created for all output media and is an incremental fee per document and per output medium.
6040    Mail Tracker Services   

This element identifies the count of Statements receiving PLANET codes based on the appropriate pricing tier established in First Data Schedule C.

 

The PLANET code is a second bar code applied to RCSI mailings in addition to the standard POSTNET bar code. At RCSI request, First Data applies PLANET codes to RCSI mailings to enable you to track the progress of each document. First Data uses the United States Postal Service Confirm tracking service. Each time RCSI document passes

 

 

Schedule A   A - 28    RCSI / First Data Confidential


Final Execution Version

 

     

through a USPS sort facility, a scan of the bar code is captured and transmitted, enabling RCSI to track documents enroute to RCSI customers.

 

The First Data MailTracker service includes the transmission of one file to RCSI daily. Transmission of multiple files will result in an additional charge. The service also includes transmission of one file to RCSI’s vendor for USPS data processing, but does not include the transaction charges. The MailTracker service allows tracking of only one document by printing a single PLANET code on the Statement address line and/or the remittance address line, at RCSI’s discretion.

7186    Backers, Message Page and Letters    This element identifies the charge for each overlay created by First Data on RCSI’s behalf for use as a backer, message page, or letter. This service includes an original proof, two proof revisions, and a final proof to be approved by you before the information is moved into production.
7187    Checks, Coupons & Ad Messages    This element identifies the charge for creating Checks, Coupons, and advertising messages used on Statements. This service includes the production of proof copies, revisions, and all related activities to move information into production.
7197    Statement - Enterprise Page 1 Duplex    This element identifies the charge for each physical sheet of paper of a customer Statement, that is printed on both sides, and is produced by First Data using the Enterprise Presentation Statement service.
7199    Statement - Enterprise Addl Pages Duplex    This element identifies the charge for each physical sheet of paper of a customer Statement, that is printed on both sides, and is produced by First Data using the Enterprise Presentation Statement service. This charge is in addition to the charge for the first physical page of the Statement.
7325    Pre-press Form Setup    This element identifies the charge associated with creating new Statement form layouts. This element includes Statement layout and set up fees.
7522    Image Composition Rush    This element identifies the additional charge for requests sent to Image Composition for pre-printed form stock such as Statements, Letters, and year-end summaries, that do not meet the following standard turnaround times: Eight days from the time Image Composition receives the request to completion of the first set of proofs; Three days for changes after the first set of proofs have been created; Three days for creating negatives. Turn around times for

 

 

Schedule A   A - 29    RCSI / First Data Confidential


Final Execution Version

 

      laser-printed products/services from Advanced Function Presentation are as follows: Fifteen days lead time from submission of request form; Three days for revision.
7801    Print 11 in Simplex - Page 1 Cont    This element identifies the charge for each 11” simplex document page 1 printed. The document printing service includes all the processes necessary to laser print a document on a continuous form.
7806    Print/Mail Prep 14 In Dup Addl Pg Cont    This element identifies the charge for each 14” duplex additional page printed and prepared for mailing. The charge is applicable to each page in addition to the first physical page and is incremental to the charge for the Cont. Page 1 Duplex 14” Print.
7813    Print 11 in Duplex - Page 1 Cont    This element identifies the charge for each 11” duplex document page 1 printed. The document printing service includes all the processes necessary to laser print a document on a continuous form.
7826    Individual Coupon Count    This element identifies the charge for each individual occurrence of a Coupon prepared for print, electronic delivery, electronic display, or inclusion in an output file. This charge is incremental to the print, mail prep, electronic delivery, electronic display, output file, and transmission fees and does not include the charge for paper.
7896    STMT - ENTERPRISE PAGE 1 SIMPLEX - 14    This element identifies the charge for each one-side-printed first page of a 14-inch cardholder Statement produced by First Data using the Enterprise Presentation Statement service. The Enterprise Presentation Statement service allows you to electronically arrange the Statement form, including placement of the payment coupon, creation and placement of logos and graphics, and selection of font types and sizes.
7897    STMT - ENTERPRISE PAGE 1 DUPLEX - 14    This element identifies the charge for each duplex (print on both sides) first page of a 14-inch cardholder Statement produced by First Data using the Enterprise Presentation Statement service. The Enterprise Presentation Statement service allows you to electronically arrange the Statement form, including placement of the payment coupon, creation and placement of logos and graphics, and selection of font types and sizes.

 

 

Schedule A   A - 30    RCSI / First Data Confidential


Final Execution Version

 

  7.3 Ancillary Services Related to Plastics Production Services

First Data shall provide any of the Ancillary Services related to Plastics Production Services as of the Effective Date at the charges set forth in Exhibit C-4. Below are additional descriptions of certain of the Ancillary Services that have been used most frequently prior to the Effective Date that relate to Print Production Services:

 

Billing
Element

  

Title

  

Description of the Ancillary Service

0577    Plasticard Contactless Chip Prsnlization    This element identifies the operational expense of personalizing the contactless chip in Radio Frequency plastics.
7615    Plasticard Purging    This element identifies the charge for each removal of a Card Carrier, printed PIN/post mailer, or plastic from the production process prior to delivery to RCSI or RCSI’s customer. This service includes, but is not limited to, pull and destroy, pull and mail to a different address, or pull and mail overnight with a 3-day turnaround.
7627    Plasticard Forms Purchased    This element identifies the charge for each item of paper material ordered by First Data on RCSI’s behalf including, but not limited to the following: Envelopes; Card activation labels; Card Carriers; Inserts; Mailers
7628    Plastics Purchased    This element identifies the charge for each item of plastic stock ordered by First Data on RCSI’s behalf.
7629    Plasticard Incoming Material Shipping    This element identifies the charge for incoming materials purchased by First Data on RCSI’s behalf.
7664    Plasticard Photo Transfer-Up to 1x1    This element identifies the charge for affixing a digitized photographic image on a plastic Transaction Card.
7666    Plasticard Photo Img Hand/Mrg Up to 1x1    This element identifies the charge for handling and merging images with the corresponding data to create a plastics output file.
7682    Plasticard Enterprise Pres Addl Page    This element identifies the charge for printing personalized check information onto a document and matching this document to a corresponding personalized Card Carrier for insertion into an envelope.
7689    Plasticard Template Creation    This element identifies the charge for creating, painting, or revising an overlay document used to print onto a page for a Card Carrier and/or mailer.

 

 

Schedule A   A - 31    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT A-1

PROCESS FLOW FOR STATEMENT/MAIL PRODUCTION

 

1. STATEMENT CYCLE DATE SCHEDULING AND SET UP

(a) RCSI will set the Statement cycle date for an individual Cardholder Account at the time that RCSI opens the Account on the First Data System.

(b) RCSI utilizes the First Data cycle scheduling which allows RCSI to set Statement cycle dates every day of the month. The last Statement cycle date of the month is the twenty eighth (28th) day.

(c) For eStatements, RCSI sets a flag at the account level to generate an eStatement.

(d) RCSI applies appropriate materials and insert strategies to the Accounts via PCF (Product Control File settings) and/or DQ (Decision Quest).

(e) For materials provided by RCSI or RCSI clients, RCSI works with their materials vendors to send materials to First Data ten (10) Production Days prior to when the materials are to be utilized in the Pre-bill or regular Statement cycle; however, if the materials are sent to First Data in less than ten (10) Production Days, First Data will make commercially reasonable efforts to complete the relevant cycle.

 

2. PRE-BILL FUNCTIONS

(a) Five (5) days prior to a Statement cycle date, First Data performs a mock cycle function that generates a subsection of Statements that will also be generated in the actual Statement cycle five (5) days later (“Pre-bill”).

(b) RCSI defines which Statements or Statement conditions are to be included in this Pre-bill process.

(c) First Data provides the mock Statements generated during Pre-bill in a file that is transmitted to RCSI every day except Sunday by approximately 11:00 am CT. First Data loads these mock Statements into AFP On-Demand, every day except Sunday.

(d) During Pre-bill, First Data also generates a mock version of the CD-1371 report which provides the details of the insert strategies that RCSI has designated for that Statement cycle. First Data loads the Pre-bill CD-1371 report to IDP.

 

3. STATEMENT CYCLE REQUIREMENTS

(a) First Data performs the Statement cycle as a part of First Data’s nightly system update. After all of the nightly system update is complete, First Data generates and transmits/loads the following files and reports for use by RCSI:

 

Exhibit A-1    A-1 - 1    RCSI / First Data Confidential


Final Execution Version

 

(i) In accordance with the TSA, First Data provides RCSI (A) the Statement Checker file, (B) the eStatement checker file, and (B) the Statement Checker IDP report of the CD-1371.

(ii) First Data sends the Statement production files to Output Services for printing.

(iii) First Data also loads the Statement Checker files and Statement Production Files into AFP On-demand as such files become available.

(b) RCSI shall utilize the files and reports provided by First Data under this Section 3 to validate the data; however, regardless of whether RCSI has approved the production files, First Data may commence Statement production by 6:00 a.m. CT. First Data is responsible for remedying all known Defects identified prior to 6:00 a.m. CT.

 

4. STATEMENT PRODUCTION INVENTORY

(a) RCSI is responsible for providing to First Data all RCSI-procured inventory that is required for use in Statement production.

(b) RCSI will provide First Data with a Statement marketing matrix by approximately the 22nd of the month prior to the month that RCSI inserts are to be used. RCSI will identify which inserts are (i) Legal/Compliance; (ii) which are marketing; and (iii) indicate RWO (Run Without) for Marketing inserts that RCSI wants First Data to run without if the supply is exhausted during a cycle.

(i) First Data will then move forward to run without that RWO insert as per instructions from RCSI.

(ii) First Data will notify RCSI of the RWO via the Daily Production Call, by email notification, or Dashboard.

(iii) As necessary RCSI will make commercially reasonable efforts to make the needed insert strategy changes in DQ the day of notification, or as quickly as systemically possible, of the RWO situation. In addition to First Data’s responsibilities regarding inventory in Schedule A, RCSI will monitor inventory levels.

(c) Legal/Compliance inserts will be on a RWO/notify as designated by RCSI’s marketing matrix. First Data will continue the production cycle and run without the insert. First Data will provide a report of Account numbers at the Account level detail that mailed without the legal insert to RCSI by 11:59 p.m. on the fifth (5th) day following the impacted cycle.

 

5. FILE CYCLE MANAGEMENT

(a) As First Data loads print files into the Production Services system, First Data management reporting is coded to reflect the expected mail date for that cycle. At the end of each day, First Data queries the system to identify any mail pieces

 

Exhibit A-1    A-1 - 2    RCSI / First Data Confidential


Final Execution Version

 

that would have a past due mail date. First Data then manages the files through the various processes (print, insert, and delivery to zip sort) with the flow delivering the file of work to the zip sort area by the daily zip sort cutoff time which will vary based by daily production volume. First Data purges the mail through the zip sort process and Releases into the USPS Mailstream by the end of Day 2 of the cycle. For the sake of clarity all mail that First Data presents to the USPS by 11:59 pm CT will be considered accepted by the USPS and recorded on the appropriate USPS mail document to reflect the current mail date.

 

Exhibit A-1    A-1 - 3    RCSI / First Data Confidential


Final Execution Version

EXHIBIT A-2

IMPLEMENTATION TERMS FOR SCS AND

DROP ON DEMAND TECHNOLOGY

This Exhibit A-2 provides the terms under which First Data will implement for RCSI (with the exception of Canada portfolios and any other portfolios RCSI chooses to exclude from SCS) (i) the SCS platform for the RCSI Statements; and (ii) the new technology described in Sections 5.1.b and 6.4.b of Schedule A that First Data shall utilize to perform the Print Production Services after April 1, 2010.

 

I. SCS MIGRATION

First Data shall convert the following RCSI Customer portfolios’ Statements from the enterprise platform used as of the Contract Execution Date to the SCS platform in accordance with the timeline provided in the chart below (provided there shall be no payments or penalties due from First Data in connection with this schedule other than as provided in Section II below):

 

LOGO

 

 

Exhibit A-2   A-2 - 1   RCSI / First Data Confidential


II. DROP ON DEMAND AND BARCODING TECHNOLOGY IMPLEMENTATION

 

  A. By April 1, 2010, the following shall be completed:

 

  1. First Data shall install and implement, all Drop on Demand and barcoding technology for RCSI volume (together (a), (b) and (c) below constitute the “Technology”): (a) as described in Sections 5.1.b and 6.4.b of Schedule A; and (b) in accordance with industry standards, manufacturer standards, and any additional specifications otherwise agreed by the Parties. First Data may use existing inventory without barcodes for up to thirty (30) days after April 1, 2010 with the intent to exhaust such existing inventory; however, First Data will use commercially reasonable efforts to use barcoded inventory during this thirty (30) day period in all other situations.

 

  2. First Data shall (A) migrate one hundred percent (100%) of all RCSI Customer portfolios’ Statements (excluding Canada and any portfolio not migrated to SCS) to the Technology; and (B) begin performing the Print Production Services in accordance with this Agreement using the Technology.

 

  B. If First Data fails to satisfy its obligations described in Section II.A above due to the fault of First Data, the following terms shall apply:

 

  1. If First Data is performing the Print Production Services using the Technology in accordance with the terms of this Agreement on more than ninety percent (90%) but less than one hundred percent (100%) of all RCSI Customer portfolios volume (excluding Canada and any other excluded portfolios) on April 1, 2010, then the following terms shall apply:

 

  a. First Data shall have up to twenty-eight (28) Production Days after April 1, 2010 during which First Data may cure its default and migrate one hundred percent of RCSI Customer portfolios’ volume (excluding Canada and any other excluded portfolios) to the Technology (“Initial Cure Period for More than 90% Migration”).

 

  b.

If after the expiration of the Initial Cure Period for More than 90% Migration, First Data has not yet begun performing the Print Production Services in accordance with this Agreement on one hundred percent (100%) of the RCSI Customer portfolios’ volume (excluding Canada and any other excluded portfolios), First Data shall provide RCSI with a credit in the amount of

 

 

Exhibit A-2   A-2 - 2   RCSI / First Data Confidential


  seventy-five thousand dollars ($75,000) for every seven (7) Production Days (or portion thereof) that First Data fails to perform the Print Production Services in accordance with this Agreement on one hundred percent (100%) of the RCSI Customer Portfolios’ volume (excluding Canada and any other excluded portfolios), up to a maximum aggregate credit of seven hundred thousand dollars ($700,000).

 

  c. If the maximum aggregate credit described in Section II.B.1.b above is reached, RCSI may terminate this Agreement without charge or penalty. RCSI may exercise the termination right described in this Section for up to one (1) year after the date the maximum aggregate credit described in Section II.B.1.b above is reached.

 

  2. If First Data is performing the Print Production Services using the Technology in accordance with the terms of this Agreement on ninety percent (90%) or less of all RCSI Customer portfolios’s volume on April 1, 2010 (excluding Canada and any other excluded portfolios), then the following terms shall apply:

 

  a. First Data shall provide RCSI with a credit of two hundred thousand dollars ($200,000) on April 1, 2010.

 

  b. First Data shall have up to twenty-eight (28) Production Days after April 1, 2010 during which First Data may cure its default and migrate one hundred percent of RCSI Customer portfolios’ volume to the Technology (“Initial Cure Period for 90% or Less Migration”).

 

  c. If after the expiration of the Initial Cure Period for More than 90% Migration, First Data has not yet begun performing the Print Production Services in accordance with this Agreement on one hundred percent (100%) of the RCSI Customer portfolios’ volume (excluding Canada and any other excluded portfolios), First Data shall provide RCSI with a credit in the amount of seventy-five thousand dollars ($75,000) for every seven (7) Production Days (or portion thereof) that First Data fails to perform the Print Production Services in accordance with this Agreement on one hundred percent (100%) of the RCSI Customer portfolios’ volume (excluding Canada and any other excluded portfolios), up to a maximum aggregate credit of five hundred thousand dollars ($500,000) under this Section II.B.2.c, and a total maximum aggregate credit under this Section II.B.2 of seven hundred thousand dollars ($700,000).

 

 

Exhibit A-2   A-2 - 3   RCSI / First Data Confidential


  d. If the maximum credit described in Section II.B.2.c above is reached, RCSI may terminate this Agreement without charge or penalty. RCSI may exercise the termination right described in this Section for up to one (1) year after the date the maximum aggregate credit described in Section II.B.2.c above is reached.

 

  C. If First Data fails to satisfy its obligations described in Section II.A above primarily due to the fault of RCSI, the credits and termination rights described in Section II.B shall not apply except to the extent described in the next sentence. However, the time frames set forth in Section II.B above shall adjust forward one day for each day of delay caused by RCSI.

 

 

Exhibit A-2   A-2 - 4   RCSI / First Data Confidential


Final Execution Version

 

 

 

EXHIBIT A-3

STATEMENT SAMPLE

 

Exhibit A-3    A-3 - 1    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT A-4

CHANGE CONTROL PROCEDURES

The Parties utilize the following Change Control Procedures set forth in the right hand column of the chart below to execute the types of Changes provided in the left column of the chart below.

 

Change Type

  

Change Document

Contract term    Amendment, letter of agreement
SOS and PEP image changes    Service Center Request
Project sizing request    PER
Project initiation    Requirements Definition Document
Project Change    Change Control form
Parameter Settings    First Data Systems - including but not limited to: Open Data Streams, Decision Quest, Product Control File, Parameter Control System, and other systems as applicable.
Materials Change    Support Central
FD Initiated System Feature change    Bulletin, and/or Release Notification
Materials Destruction requests and request for new inventory set up inventory code    Support Central
All other    Email

 

Exhibit A-4    A-4 - 1    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT A-5

PAY-PASS SPECIFICATIONS

 

I. Title Purpose /Description

 

  A. PayPass - Mag Stripe Technical Specification:

Technical specification detailing what must be implemented in PayPass - Mag Stripe chip cards and PayPass - Mag Stripe terminals to process and manage payment application data between the two in a globally interoperable contactless process.

 

  B. PayPass - M/Chip Technical Specification:

Technical specification detailing what must be implemented in PayPass - M/Chip chip cards and PayPass – M/Chip terminals to process and manage M/Chip payment application data between the two in a globally interoperable contactless process.

 

  C. PayPass - ISO/IEC 14443 Implementation Specification:

Technical specification detailing what must be implemented to comply with MasterCard’s ISO/IEC 14443 Implementation Specification. This specification is based on the ISO/IEC 14443 standard, but includes additional information for guaranteed interoperability/compatibility between implementations.

 

II. PayPass - Mag Stripe Card Approval Process

 

  A. Technical Specifications that describes the mandatory requirement which vendors wishing to supply PayPass cardholder devices (cards, fobs, tags) or their constituent components must complete before the product can be sold to MasterCard issuers and deployed in the field.

 

  B. The PayPass Specifications include the specifications above, any and all future and successor versions or releases thereof, and any other specifications mutually agreed to from time to time in a written amendment hereto.

 

Exhibit A-5    A-5 - 1    RCSI / First Data Confidential


Schedule B

Service Levels

FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

by and between

RETAILER CREDIT SERVICES, INC.

and

FIRST DATA RESOURCES, LLC.


TABLE OF CONTENTS

 

SERVICE LEVELS

     1   

1.

  

INTRODUCTION

     1   

2.

  

DEFINITIONS

     1   
  

2.1

  

Certain Definitions.

     1   
  

2.2

  

Other Terms.

     5   

3.

  

MEASUREMENT, REPORTING, AND SUPPORTING INFORMATION

     5   
  

3.1

  

Measurement.

     5   
  

3.2

  

Measurement Tools.

     5   
  

3.3

  

Reports and Supporting Information.

     6   
  

3.4

  

Process Management Reviews.

     7   

4.

  

SERVICE LEVEL METHODOLOGY

     8   
  

4.1

  

General.

     8   
  

4.2

  

Amounts at Risk.

     8   
  

4.3

  

Excused Service Level Defaults.

     8   
  

4.4

  

Service Level Defaults.

     9   
  

4.5

  

Service Level Credits for Critical Service Level Defaults.

     9   
  

Impact of External Defectives

     12   
  

4.6

  

Special Service Level Credits for Special Service Level Defaults.

     15   
  

4.7

  

Holds and RCSI System Delays.

     19   

5.

  

MODIFICATIONS AND IMPROVEMENTS TO SERVICE LEVELS.

     20   
  

5.1

  

Addition, Deletion, and Modification of Service Levels.

     20   
  

5.2

  

Designation of Critical Service Levels.

     20   
  

5.3

  

Tracking Service Levels and Special Service Levels.

     20   
  

5.4

  

Weighting Factors.

     20   

6.

  

QUALITY-RELATED SERVICE LEVELS

     21   
  

6.1

  

Print Service Levels.

     21   
  

6.2

  

Plastics Service Levels.

     22   

7.

  

RELATIONSHIP BETWEEN THIS AGREEMENT AND THE TSA REGARDING SERVICE LEVELS

     22   

LIST OF EXHIBITS

 

Exhibit B-1 – Service Level Metrics
Exhibit B-2 – CTQ’s
Exhibit B-3 – Intentionally Left Blank
Exhibit B-4 – Customer Billing Groupings


SCHEDULE B

SERVICE LEVELS

 

1. INTRODUCTION

This Schedule B sets forth the Service Levels that First Data is required to meet or exceed in performing certain of the Production Services during the Term. This Schedule also describes (a) the methodology for calculating Service Level Credits and Special Service Level Credits that will be provided to RCSI by First Data if First Data fails to meet a Critical Service Level or a Special Service Level, and (b) the process the Parties will follow to add, modify or delete Service Levels during the Term.

 

2. DEFINITIONS

 

  2.1 Certain Definitions.

(a) “ABC/Offline Letter” means a Letter First Data produces from a file that does not reside on the First Data System and is therefore not generated from the First Data system.

(b) “Amount at Risk for Print Production Services” means an amount equal to *** of the total monthly charges for billing elements 0601 – Enterprise Statements, 7814 – SCS Statements and Letters, 7471 – Crown Letters, and 7801 – ABC/Offline Letters payable by RCSI for Print Production Services under this Agreement as described in Exhibits C-1, C-2 and C-4.

(c) “Amount at Risk for Plastics Production Services” means an amount equal to *** of the total monthly charges for billing elements 7473 – Embossing, 7640 – ***, Expedited Turnaround, and 7651 – Mass Reissues (only applicable if First Data fails a Service Level for a Mass Reissue) payable by RCSI for Plastics Production Services under this Agreement as described in Exhibits C-1, C-2 and C-4.

(d) “BRC” means Business Revolving Charge.

(e) “Business Days” means Monday through Saturday, twenty-four (24) hours per day, excluding the First Data Holidays.

(f) “Consumer” means RCSI’s Consumer portfolios.

(g) “Control Chart” means a tool approved by RCSI that is used to monitor, control and improve process performance over time by evaluating variation in performance and identifying its source or root cause.

(h) “Critical Service Level” or “CSL” means those Service Levels that are (i) assigned a Weighting Factor for Print Production Services or a Weighting Factor for Plastics Production Services; or (ii) are so designated as “Critical” in Exhibit B-1 even in the absence of an assigned Weighting Factor for Print Production Services or a Weighting Factor for Plastics Production Services, for which a Service Level Credit is payable in the event of a Critical Service Level Default, and are designated by RCSI in accordance with Section 5.2 of this Schedule B.


Final Execution Version

 

(i) “Critical Service Level Default” means, with regard to any Critical Service Level, First Data’s failure to perform at a level that meets the corresponding Critical Service Level during any particular Measurement Period.

(j) “Critical To Quality” or “CTQ” means the set of measurable characteristics that describe and specify the quality requirements of a product or service under this Agreement. The CTQ characteristics are set forth in Exhibit B-2 to this Schedule B.

(k) “Dashboard” means the sets of reports, meetings, and other communications currently utilized by First Data and RCSI as the Dashboard report as of the Effective Date. The Parties may revise the Dashboard as mutually agreed by the Parties.

(l) “Defect” means any event that does not comply with the specification of a CTQ (Exhibit B-2).

(m) “Defective” means a Unit with one or more Defects.

(n) “Defects per Million Opportunities” or “DPMO” means the total number of Defects divided by the total number of opportunities for a defect, multiplied by 1,000,000.

(o) “External Defect” has the meaning set forth in Section 4.5(e)(i) of this Schedule B.

(p) “First Data Holidays” means collectively New Year’s Day, Independence Day, Labor Day, Thanksgiving Day, and Christmas Day as they actually fall on the calendar on any day of the calendar week, including weekends (i.e. not the dates as observed by the U.S. government). Memorial Day shall also constitute a First Data Holiday but shall fall on the day that Memorial Day is observed by the U.S. government.

(q) “Holds” means the frequency and length of time First Data, RCSI and/or RCSI Customers temporarily suspend production and/or mailing.

(r) “Internal Defect” means any instance where a Statement Package, Transaction Card Package, Statement, Letter, or Other Correspondence contains one or more observed Defects, which Defect is discovered prior to the Statement Package, Transaction Card Package, Statement, Letter, or Other Correspondence being Released into the USPS Mailstream by First Data.

(s) “Major Release” means a scheduled First Data event that occurs no more than five times per calendar year, where software changes are made to the First Data system. First Data will provide RCSI with a comprehensive Major Release calendar designating the Major Releases for that calendar year prior to the start of each calendar year.

 

 

Schedule B    B - 2    RCSI / First Data Confidential


Final Execution Version

 

(t) “Measurement Period” means, for any Service Level, the period of time during which First Data’s actual performance of the relevant Production Services is to be measured against the corresponding Service Level. The Measurement Period for each Service Level is set forth in Exhibit B-1.

(u) “Other Non-USPS Mail Vendor Delivery” means completed jobs are presented to a mail courier other than the USPS (e.g. PSI or FedEx.)

(v) “Plastics Service Level(s)” means those Service Levels which correspond to Plastics Production Services.

(w) “Plastics Production Services” means the Production Services or functions performed that are related to the embossing and mailing of Transaction Cards set forth in this Agreement, including any Support Services and Ancillary Services related to the embossing and mailing of Transaction Cards.

(x) “Pool Percentage Available for Allocation for Print Production Services” means ***.

(y) “Pool Percentage Available for Allocation for Plastics Production Services” means ***.

(z) “Print Production Services” means those Production Services or functions performed that are related to the printing and mailing of Statements, Letters or Other Correspondence set forth in this Agreement, including any Support Services and Ancillary Services related to the Statements, Letters, and Other Correspondence.

(aa) “Print Service Level(s)” means those Service Levels which correspond to Print Production Services.

(bb) “Product Category” means each product offer by RCSI as designated in this Agreement. As of the Effective Date, there are three (3) Product Categories: BRC, GECOM/PROX, and Consumer. Upon mutual agreement, changes can be made to the meaning of Product Category.

(cc) “Production Day” means those days of the week on which First Data is open for normal operation, which is twenty-four (24) hours per day, seven (7) days per week, excluding the First Data Holidays.

(dd) “Release into the USPS Mailstream” means the point in time at which First Data properly presents items to be mailed (including Statements, Statement Packages, Letters, and Transaction Card Packages) to the USPS in accordance with applicable USPS guidelines, regulations, and laws. If the USPS ceases to accept mail seven (7) days per week (e.g. the USPS accepts mail only five (5) or six (6) days per week), an item will be deemed to be Released into the USPS Mailstream on the date it otherwise would have been Released into the USPS Mailstream had the USPS continued to accept mail seven (7) days per week provided that First Data actually presents the items to the USPS on the first (1st) following day that the USPS is accepting mail.

 

 

Schedule B    B - 3    RCSI / First Data Confidential


Final Execution Version

 

(ee) “Service Levels” are the quantitative performance standards for certain of the Production Services set forth in this Schedule B (Service Levels). Service Levels include all Service Levels, including Tracking Service Levels, Critical Service Levels and Special Service Levels.

(ff) “Service Level Credit” has the meaning provided in Section 4.4(b) of this Schedule B.

(gg) “Service Level Default” means, with regard to any Service Level (including Critical Service Levels and Special Service Levels), (i) a failure by First Data to perform at the level that meets the corresponding Service Level during any particular Measurement Period, or (ii) to properly monitor or measure any Service Level.

(hh) “Special Service Level” means those Service Levels that are described in Section 4.6 of this Schedule B and in Exhibit B-1 for which a Special Service Level Credit is payable in the event of a Special Service Level Default.

(ii) “Special Service Level Credit” has the meaning provided in Section 4.6(a) of this Schedule B.

(jj) “Special Service Level Default” means, with regard to any Special Service Level, First Data’s failure to perform at a level that meets the corresponding Special Service Level during any particular Measurement Period.

(kk) ***

(ll) “Tracking Service Level” means those Service Levels that are (i) not designated as Critical or Special in Exhibit B-1; (ii) not assigned a Weighting Factor for Print Production Services or a Weighting Factor for Plastics Production Services; and (iii) for which no Service Level Credit is payable in the event of a Service Level Default. The Tracking Service Levels are designated in Exhibit B-1.

(mm) “Unit” means the item produced or processed.

(nn) “USPS” means the United States Postal Service.

(oo) —“Weighting Factor for Plastics Production Services” means the portion of the Pool Percentage Available for Allocation for Plastics Production Services that RCSI has allocated with respect to a Critical Plastics Service Level. The Weighting Factor for Plastics Production Services for the applicable Critical Plastics Service Levels as of the Effective Date is set forth in Exhibit B-1, and shall be subject to modification pursuant to Section 5.4 of this Schedule B.

(pp) Weighting Factor for Print Production Services” means the portion of the Pool Percentage Available for Allocation for Print Production Services that RCSI has allocated with respect to a Critical Print Service Level. The Weighting Factor for Print Production Services for the applicable Critical Print Service Levels as of the Effective Date is set forth in Exhibit B-1, and shall be subject to modification pursuant to Section 5.4 of this Schedule B.

 

 

Schedule B    B - 4    RCSI / First Data Confidential


Final Execution Version

 

(qq) “Wrong Material” means for purposes of the Wrong Materials SLA any instance in accordance with Section 4.6(c) of this Schedule B that a Statement Package, Letter or Transaction Card Package is received by an RCSI cardholder and (i) contains a barcoded item whose barcode is Incorrect; and/or (ii) contains a white form that (A) does not contain a barcode; and (B) does not comply with the RCSI’s requirements provide to First Data in the bill of materials. “Incorrect” means that any barcoded form stock, insert, or envelope does not conform to the instructions provided by RCSI to First Data (in accordance with the Parties’ mutually agreed process for providing instructions) for the appropriate form stock, insert, or envelope. All items, except for white forms as described in Section (ii) above in this paragraph, constituting Wrong Material must contain a barcode. For the avoidance of doubt, if an item contains a Defect that is not related to its barcode, the Defective does not constitute Wrong Material. For clarity purposes, revisions to a form, insert, or envelope are excluded, unless the form code is changed, and missing items are also excluded.

(rr) “Working Day” means Monday through Friday, from 7:00 a.m. through 4:00 p.m. CT, excluding First Data Holidays.

 

  2.2 Other Terms.

Other terms used in this Schedule B (or any Exhibit or Attachment to this Schedule B) are either defined in the context in which they are used or are defined elsewhere in this Agreement, and in each case shall have the meanings there indicated.

 

3. MEASUREMENT, REPORTING, AND SUPPORTING INFORMATION

 

  3.1 Measurement.

(a) Except as otherwise expressly provided for a particular Service Level in Exhibit B-1, the Measurement Period for each Service Level shall be each calendar month during the Term.

(b) Except as otherwise expressly indicated in this Schedule B, all references to time of day in this Schedule B shall refer to central time and any reference to “hour” or “hours” shall mean clock hours.

 

  3.2 Measurement Tools.

(a) Subject to RCSI’s prior written approval, provided that such approval not be unreasonably withheld, First Data shall utilize, develop and implement measurement tools and processes required to measure each Service Level in an automated fashion, where such automation is feasible, such that First Data’s actual performance with respect to the Service Level shall be determined using system generated data.

(b) First Data shall measure its performance with respect to each Service Level using tools, processes and methodologies identified for such Service Level in Exhibit B-1 or as otherwise agreed to by the Parties or as specified pursuant to Section 3.2(d) of this Schedule B.

 

 

Schedule B    B - 5    RCSI / First Data Confidential


Final Execution Version

 

(c) First Data shall provide and utilize (and have operational and administrative responsibility for) the necessary measurement and monitoring tools and procedures required to measure and report First Data’s performance of the Production Services against the applicable Service Levels set forth in this Agreement as of the Effective Date, and thereafter in accordance with Section 3.2(d) of this Schedule B. Such measurement and monitoring shall permit reporting at a level of detail sufficient to verify compliance with the Service Levels, and will be subject to verification and review by RCSI. First Data shall provide RCSI with information and access to such tools and procedures upon request, for purposes of verification.

(d) If, after the Effective Date, First Data desires to use a different measurement tool, process or methodology for any Service Level, First Data shall provide written notice to RCSI proposing:

(i) the alternative measurement tool, process or methodology; and

(ii) any reasonable adjustments to the Service Levels that are necessary to account for any increased or decreased sensitivity that will likely result from use of the alternative measurement tool, process or methodology.

(e) First Data may utilize such alternative measurement tool, process or methodology only to the extent such tool, and any associated Service Level adjustments, are approved in writing by RCSI provided the approval is not unreasonably withheld.

 

  3.3 Reports and Supporting Information.

(a) First Data shall deliver the following reports in accordance with the times provided below:

(i) *** plastics / Statements timeliness and accuracy data will be provided by the fifth (5th) Working Day of the month.

(ii) The remaining monthly data reports will be completed by the seventh (7th) Working Day of the month.

(iii) The Monthly Performance Report, and any other performance summary documents (e.g. reports of Service Level Defaults and Service Level Credit calculations) and the monthly PSA review four blocker will be completed by the tenth (10th) Working Day of the month.

(b) First Data shall make the reporting and supporting information described in this Section 3.3, available to RCSI both (i) in machine-readable form suitable for use on a personal computer; and (ii) via a secure website; provided, however, that if requested by RCSI, First Data shall also provide to RCSI ***, to the extent that the agreed-upon measurement tools used to measure performance are

 

 

Schedule B    B - 6    RCSI / First Data Confidential


Final Execution Version

 

capable of providing such access. To the extent that such tools are not capable of providing RCSI with such *** access, First Data shall promptly provide access to timely data upon RCSI’s request. As of the Effective Date, First Data will provide *** seat licenses each at *** for both *** and *** under this Section 3.3(b).

(c) Unless otherwise set forth in this Agreement, First Data shall report at the level of detail (e.g. by individual RCSI Customer or by client number), based on the reporting detail First Data provided to RCSI prior to the Effective Date. RCSI Customers may change from time to time and First Data shall promptly make the necessary adjustments to its reporting in a manner satisfactory to RCSI.

(d) First Data will utilize Control Charts for monitoring the Service Levels.

(e) Trend reporting shall be provided by First Data and Control Charts shall be utilized (where appropriate). The raw data shall be provided in tabular format beneath each report or chart or on an attachment thereto. All reporting shall be secure and available to RCSI through means set forth in Section 3.3(b) as well as in spreadsheet and hard copy form.

(f) The purpose of a Dashboard report is to report on First Data’s success in achieving the standards set forth in the relevant Service Level. Dashboard reports shall be generated using the RCSI approved measurement and monitoring tools and procedures required to measure and report on First Data’s performance of the relevant Production Services as well as supporting metrics. Dashboard reports shall be provided to RCSI on a daily, weekly and monthly basis and shall be completed at no additional charge to RCSI.

 

  3.4 Process Management Reviews.

(a) First Data shall coordinate and host on all Working Days a daily “Process Management Status Call” with RCSI to discuss any known problems that have an adverse effect on service and/or RCSI Customer satisfaction. First Data shall maintain a constant focus on problem identification, recovery and problem remediation. For the two weeks following August 20, 2009, the Parties shall conduct the Process Management Status Call on every Production Day.

(b) On Saturdays no later than 7:00 a.m. CT, First Data shall send an email to RCSI providing information with respect to any known problems that have an adverse effect on service and/or RCSI Customer satisfaction (“Process Management Status Email”). If there is a problem identified in the Process Management Status Email or any known problem identified by RCSI to First Data that RCSI requires to be resolved immediately, First Data will promptly on Saturday perform the services necessary to resolve such problem.

 

 

Schedule B    B - 7    RCSI / First Data Confidential


Final Execution Version

 

4. SERVICE LEVEL METHODOLOGY

 

  4.1 General.

(a) First Data shall provide, and RCSI will have access to, all detailed supporting Service Level information (including raw performance data) as reasonably requested by RCSI which is necessary to verify the accuracy of the Service Levels and which is necessary to verify First Data’s performance relative to Service Level measurements and methodology described in this Section 4.1, as well as all other supporting information reasonably requested by RCSI. Service Levels constitute one means, but not the exclusive means, of measuring First Data’s performance of its commitment under Section 6 of this Agreement.

(b) If a Service Level requires performance of multiple conditions or components (e.g., components (a), (b) and (c)), then First Data’s performance must satisfy each such requirement to achieve the corresponding Service Level.

(c) First Data will give the recovery of its capabilities to perform the Production Services and the resumption of its actual performance of the Production Services the same or greater priority it gives to recovering its capabilities to perform substantially similar services and resuming its performance of those services for any other customer of First Data.

(d) If any portion of the Production Services are to be provided from a business continuity recovery environment, the Service Levels will continue to apply, subject to Section 16.3 (Force Majeure) of this Agreement.

 

  4.2 Amounts at Risk.

(a) First Data will place the Amount at Risk for Print Production Services at risk each month for Service Level Credits in this Agreement for Print Service Levels.

(b) First Data will place the Amount at Risk for Plastics Production Services at risk each month for Service Level Credits in this Agreement for Plastics Service Levels.

 

  4.3 Excused Service Level Defaults.

(a) If First Data fails to meet a Service Level and establishes within two (2) months after such failure that: (i) RCSI’s failure to perform a retained responsibility was the root cause of First Data’s failure to meet such Service Level; (ii) First Data would have achieved such Service Level but for such RCSI failure; (iii) First Data used commercially reasonably efforts to perform and achieve the Service Level notwithstanding the presence and impact of such RCSI failure; and (iv) First Data is without fault in causing such RCSI failure, then no Service Level Credit (if applicable) or Special Service Level Credit will be assessed against First Data for any resulting Service Level Default, and First Data will otherwise be excused from achieving such Service Level for as long as RCSI fails to perform such retained responsibility and First Data continues to use commercially reasonably efforts to prevent, overcome, or mitigate the adverse effects of such failure to the extent required to achieve the applicable Service Level.

 

 

Schedule B    B - 8    RCSI / First Data Confidential


Final Execution Version

 

(b) First Data will not be excused from a failure to achieve a Service Level other than pursuant to the following circumstances or provisions: (i) Section 4.3(a), (ii) Section 4.7(a), (iii) Section 9.2 (Savings Clause) of this Agreement, (iv) failures caused by the wrongful actions of RCSI, or (v) Section 16.3 (Force Majeure) of this Agreement.

 

  4.4 Service Level Defaults.

(a) First Data shall promptly perform a Root Cause Analysis (i) following any material change in performance of any Service Level, (ii) whenever performance trends dictate same ***, (iii) whenever there occurs any material Service Level Default, or (iv) as otherwise reasonably requested by RCSI. “Root Cause Analysis” shall include: (a) prompt investigation and reporting as to the root causes of the problem; (b) prompt correction of the problem; and (c) regular advice to RCSI as to the status of remedial efforts undertaken to cure such problem. Additionally, First Data shall propose and deliver to RCSI, within thirty (30) days following each material Service Level Default, a written plan (acceptable to RCSI) for prevention of future failures (“Service Level Plan”).

(b) First Data recognizes that a Critical Service Level Default may have a material adverse impact on the business and operations of RCSI and that the damage from such Critical Service Level Default is not susceptible to precise determination. Accordingly, in the event of a Critical Service Level Default for reasons other than those set forth in Section 4.3 of this Schedule B (Excused Performance) then, RCSI may *** in lieu of pursuing other monetary remedies to recover as its sole and exclusive monetary remedy for such Critical Service Level Default a credit calculated pursuant to Section 4.5 of this Schedule B as liquidated damages (each such credit, a “Service Level Credit”) ***. Neither this Section 4.4(b) nor any *** hereunder shall limit RCSI’s rights with respect to the events upon which RCSI may rely as a basis for RCSI’s termination of this Agreement for cause.

 

  4.5 Service Level Credits for Critical Service Level Defaults.

(a) Calculation.

(i) For each Critical Service Level Default except those set forth in Section 4.5(d) and 4.5(e) below, the applicable Service Level Credit referenced in Section 4.4(b) above shall be calculated in accordance with the following formula:

Service Level Credit = A x B

Where:

A = the applicable Weighting Factor for Print Production Services or Weighting Factor for Plastics Production Services; multiplied by

B = the Amount at Risk for Print Production Services or the Amount at Risk for Plastics Production Services for such calendar month.

(ii) For example, assume the Amount at Risk for Print Production Services for the month were ***. Additionally, assume the applicable

 

 

Schedule B    B - 9    RCSI / First Data Confidential


Final Execution Version

 

Weighting Factor for Print Production Services allocated by RCSI to such Critical Service Level is *** percentage points. The Service Level Credit due to RCSI for such Critical Service Level Default would be computed as follows:

A = ***multiplied by

B = ***

= *** (the amount of the Service Level Credit).

(b) Service Level Credits for Critical Service Level Defaults for Print Production Services (Excluding Timeliness and External Defect-related Critical Print Service Levels).

Beginning on the Effective Date, Service Level Credits for Critical Service Level Defaults for Print Service Levels other than Timeliness and External Defect-related Print Service Levels will be calculated in accordance with Section 4.5(a) above by multiplying the Weighting Factor for Print Production Services assigned to the particular Critical Service Level for which there has been a Critical Service Level Default by the Amount at Risk for Print Production Services.

(c) Service Level Credits for Critical Service Level Defaults for Plastics Production Services (Excluding Timeliness and External Defect-related Critical Plastics Service Levels).

Beginning on the Effective Date, Service Level Credits for Critical Service Level Defaults for Plastics Service Levels other than timeliness and External Defect – related Plastics Service Levels will be calculated in accordance with Section 4.5(a) above by multiplying the Weighting Factor for Plastics Production Services assigned to the particular Critical Service Level for which there has been a Critical Service Level Default by the Amount at Risk for Plastics Production Services.

(d) Service Level Credits for Timeliness-related Critical Service Level Defaults for Print Service Levels and Plastics Service Levels.

(i) The Service Level Credit calculated pursuant to this Section 4.5(d) shall be *** (A) the result of the calculation provided in Section 4.5(d)(ii); and (B) ***.

(ii) Service Level Credits for timeliness-related Critical Service Level Defaults will be calculated in accordance with the following formula:

Service Level Credit = A x B

Where:

A = the applicable Weighting Factor for Print Production Services or Weighting Factor for Plastics Production Services; multiplied by

B = ***

 

 

Schedule B    B - 10    RCSI / First Data Confidential


Final Execution Version

 

(iii) For example, assume First Data misses a Critical Service Level for timeliness related to Account detail reporting (2.6 in Exhibit B-1) for RCSI Customer *** in the Consumer Product Category. Assume that the Amount at Risk for Print Production Services for the month were ***. Assume the *** applicable monthly charges for Print Production Services for the Consumer Product Category were ***. Additionally, assume the applicable Weighting Factor for Print Production Services allocated by RCSI to such Critical Service Level is ***. The Service Level Credit due to RCSI for such Critical Service Level Default would be computed as *** and (ii) the following calculation:

A = *** multiplied by

B = ***

= *** (the amount of the Service Level Credit).

As such, the Service Level Credit would be ***.

(iv) The following timeliness-related Service Levels are excepted from the limitations set forth in Sections 4.5(d)(i) through 4.5(d)(iii):

(A) The 2 Day SLA Special Service Level, which shall be calculated in accordance with Section 4.6(b); and

(B) The Recovery Letter Service Level set forth in Exhibit B-1, which shall be calculated in accordance with terms set forth in Exhibit B-1. For the sake of clarity, this Recovery Letter Service Level is a Critical Service Level even though no Weighting Factor for Print Production Services has been assigned to this Service Level.

(e) Critical Service Level for External Defects other than Wrong Materials.

(i) Definition of External Defect

External Defects” are Defects *** in a calendar month by *** (but were not identified during the First Data sampling process) that per occurrence:

(A) ***; or

(B) ***

(C) The number of Accounts impacted overall determines if a Service Level is missed; the number of Accounts is not used in the calculation of Service Level Credits per occurrence per month.

 

 

Schedule B    B - 11    RCSI / First Data Confidential


Final Execution Version

 

(D) To determine whether there is an occurrence of an External Defect for ***, the following table shall be utilized in accordance with Section 4.5(e)(i)(B):

 

Impact of External Defectives   

# Statement

Defectives Per

Occurrence Per

Month

  

# Card Defectives

Per Occurrence

Per Month

    
***    ***    ***   
***    ***    ***   

(ii) The occurrence of any External Defects shall result in Service Level Credits as described below:

(A) The maximum Service Level Credit per incident (not per month) of External Defects shall be limited to the lesser of *** or the calculated Critical Service Level Credit provided in Section 4.5(e)(ii)(B).

(B) The Service Level Credit calculated pursuant to this Section 4.5(e)(ii)(B) shall be the greater of (A) the result of the calculation provided in this Section 4.5(e)(ii)(B); and (B) ***.

(1) Service Level Credits for External Defects-related Critical Service Level Defaults will be calculated in accordance with the following formula:

Service Level Credit = A x B

Where:

A = the applicable Weighting Factor for Print Production Services or Weighting Factor for Plastics Production Services; multiplied by

B = *** for the month in which such Critical Service Level Default occurs.

(2) For example, assume First Data misses the External Defects Service Level (11.2 in Exhibit B-1) for RCSI’s Customer, *** Consumer Product Category. Assume that the Amount at Risk for Print Production Services for the month were ***. Assume the applicable individual RCSI Customer monthly charges for Print Production Services for the Product Category for this Customer were $25,000. Additionally, assume the applicable Weighting Factor for Print Production Services allocated by RCSI to such Critical Service Level is ***. The Service Level Credit due to RCSI for such External Defect would be computed as follows:

A = *** multiplied by

 

 

Schedule B    B - 12    RCSI / First Data Confidential


Final Execution Version

 

B = *** (which is ***of $25,000)

= *** (would be the amount of the Service Level Credit).

As such, the Service Level Credit would be *** as (A) *** is greater than *** in accordance with Section 4.5(e)(ii)(B), and (B) *** is less than *** in accordance with Section 4.5(e)(ii)(A).

(3) As another example, assume that in the same month, First Data misses the External Defects Service Level (11.3 in Exhibit B-1) for RCSI’s Customer, ***. Assume the Amount at Risk for Plastic Production Services is ***. Assume the individual *** RCSI Customer applicable monthly charges for Plastic Production Services were $45,000. Additionally, assume the applicable Weighting Factor for Plastic Production Services allocated by RCSI to such Critical Service Level is ***. The Service Level Credit due to RCSI for such Critical Service Level Default would be computed as follows:

A = *** multiplied by

B = *** (which is *** of $45,000)

= *** (would be the amount of the Service Level Credit).

As such, the Service Level Credit would be ***as (A) *** is greater than *** in accordance with Section 4.5(e)(ii)(B), and (B) *** is less than *** in accordance with Section 4.5(e)(ii)(A).

(iii) The External Defects-related Service Level Credit set forth in Section 4.5(e)(ii)(A) and 4.5(e)(ii)(B) shall not apply, and any other applicable Critical Service Level Credit (if any) will continue to apply if any of the following occur:

(A) If First Data identifies an External Defect and notifies RCSI of such External Defect prior to RCSI either (i) discovering it itself, or (ii) being informed of the External Defect by a client or customer, such External Defect shall not treated as an External Defect-related Critical Service Level Default under this Section 4.5(e). However, First Data is obligated to contain within a commercially reasonable time any Defects discovered by First Data under this Section;

(B) Any External Defect that RCSI caused or substantially contributed to shall not be treated as an External Defect-related Critical Service Level Default for purposes of this Section 4.5(e);

(C) Any External Defect that in RCSI’s judgment has no RCSI Customer, client or Cardholder impact shall not be treated as an External Defect-related Critical Service Level Default for this Section 4.5(e);

(D) At RCSI’s sole discretion if the Parties mutually agree to a satisfactory resolution to the problems caused by an External Defect and at its expense First Data undertakes all necessary corrective actions (such as a remail, Reprint, Rerun, restuff, or re-emboss and mail) it shall not be treated as an External Defect-related Critical Service Level Default for this Section 4.5(e); and

(E) At RCSI’s sole discretion if an External Defect is not significant it may agree that it shall not be treated as an External Defect-related Critical Service Level Default for this Section 4.5(e).

 

 

Schedule B    B - 13    RCSI / First Data Confidential


Final Execution Version

 

(f) RCSI Customer Billing Groupings

The individual RCSI Customer billing groupings as of the Effective Date for purposes of this Section 4.5(d) and Section 4.5(e) are provided in Exhibit B-4. The Parties may revise the groupings provided in Exhibit B-4 as mutually agreed in writing.

(g) Notification.

For each Critical Service Level Default, First Data shall promptly notify RCSI of such failure.

(h) Limitations.

(i) In no event shall the sum of the Weighting Factors for Print Production Services for all relevant Critical Service Levels exceed the Pool Percentage Available for Allocation for Print Production Services.

(ii) In no event shall the sum of the Weighting Factors for Plastics Production Services for all Critical Service Levels exceed the Pool Percentage Available for Allocation for Plastics Production Services.

(iii) In no event shall the total amount of Service Level Credits payable by First Data for Critical Service Level Defaults for Print Production Services and Wrong Material Special Service Level occurring during a calendar month exceed the Amount at Risk for Print Production Services for such calendar month.

(iv) In no event shall the total amount of Service Level Credits payable by First Data for Critical Service Level Defaults for Plastics Production Services and Wrong Material Special Service Level occurring during a calendar month exceed the Amount at Risk for Plastics Production Services for such calendar month.

(v) If a single incident results in more than one Service Level Default, RCSI shall have the right to determine which Service Level and resulting Service Level Credit will apply. In order for the foregoing to apply, First Data shall have the burden of demonstrating to RCSI’s reasonable satisfaction, that a single event resulted in the failure of First Data to meet more than one (1) Service Level. RCSI may not assess more than one (1) Service Level Default against similar incidents occurring within the same month. Furthermore, repeated Service Level Defaults of a particular Service Level in a single month caused by similar incidents shall constitute a single Service Level Default for purposes of assessing Service Level Credits for a particular month.

 

 

Schedule B    B - 14    RCSI / First Data Confidential


Final Execution Version

 

  4.6 Special Service Level Credits for Special Service Level Defaults.

(a) General.

First Data recognizes that a Special Service Level Default may have a material adverse impact on the business and operations of RCSI and that the damage from such Special Service Level Default is not susceptible to precise determination. Accordingly, in the event of a Special Service Level Default for reasons other than those set forth in Section 4.3 of this Schedule B (Excused Performance) RCSI may recover as its sole and exclusive monetary remedy for such Special Service Level Default a credit calculated pursuant to Sections 4.6(b) and 4.6(c) of this Schedule B as liquidated damages (each such credit, a “Special Service Level Credit”). This Section 4.6(a) shall not limit RCSI’s rights with respect to the events upon which RCSI may rely as a basis for RCSI’s termination of this Agreement for cause as related to the Wrong Materials Special Service Level described in Section 4.6(c) below. For the sake of clarity, the termination rights set forth in Section 4.6(b) relating to the 2 Day SLA are the sole and exclusive termination rights relating to a Special Service Level Default of the 2 Day SLA.

(b) Special Service Level for Two Day Statement and Statement Package Timeliness.

(i) The Two Day Statement and Statement Package Timeliness Service Level (the “2 Day SLA”) is a Special Service Level in accordance with this Schedule B and Exhibit B-1. The 2 Day SLA shall be effective from August 20, 2009 in accordance with the following terms:

(A) Service Level Credits shall apply for any Special Service Level Default of the 2 Day SLA as of the cycle start date of August 20, 2009; and

(B) RCSI’s *** in accordance with this Section 4.6(b) shall be effective as of the Effective Date (December 1, 2009).

(ii) In the event of a Special Service Level Default of the 2 Day SLA in the ranges provided in this Section, the resulting Special Service Level Credit shall be calculated as follows:

(A) If First Data commits a Special Service Level Default of the 2 Day SLA measuring below the metric of *** the following rules apply:

(1) RCSI will receive a Special Service Level Credit of the lesser of (a) the *** as a result of First Data’s failure, calculated in accordance with Section 4.6(b)(iii) below (“***”); and (b) ***. ***.

(2) In the twelve (12) calendar months following the month in which a Special Service Level Default of the 2 Day SLA measuring below the metric of *** (a “Trigger Event”), the following rules shall apply:

a. If there is a subsequent Special Service Level Default of the 2 Day SLA measuring below the metric of ***, First Data shall provide RCSI with a Special Service Level Credit of the lesser of (a) ***; and (b) ***.

 

 

Schedule B    B - 15    RCSI / First Data Confidential


Final Execution Version

 

b. If there are any additional subsequent Special Service Level Defaults of the 2 Day SLA measuring below the metric of *** during the same rolling twelve (12) calendar month period after the initial Trigger Event, during such rolling twelve (12) calendar month period, First Data shall provide RCSI with a Special Service Level Credit of the lesser of (a) ***; and (b) ***. ***, such event shall *** for the purposes of Section *** of this Agreement during which RCSI may *** provided that RCSI *** following the month in which the last such Service Level Failure occurred, provided that *** Subsequent to providing *** in accordance with this Section, RCSI shall be excused from failure to meet the ***.

c. If there is more than *** Trigger Event in any twelve (12) calendar month period, the determination as to the number of Special Service Level Defaults of the 2 Day SLA that have occurred shall be based upon counting from the earliest Trigger Event within any twelve (12) month period in which a subsequent Special Service Level Default occurred (but no earlier than August 20, 2009). By way of example, if there are Trigger Events in *** and ***, a Special Service Level Default occurring in *** shall be the *** default for the purposes of the *** Trigger Event (each Trigger Event also being a Special Service Level Default). If another Special Service Level Default occurs in *** it would then be the *** default for the purposes of the look-back to the twelve (12) month period that includes the *** Trigger Event. For clarification, each Special Service Level Default may incur only one financial penalty.

(B) If First Data commits a Special Service Level Default of the 2 Day SLA measuring below the metric of *** at any time, First Data shall provide RCSI with a Special Service Level Credit of ***. ***. First Data is not excused from satisfying this threshold during the Major Releases each year. RCSI shall not be entitled to Special Service Level Credits for the 2 Day SLA for any Special Service Level Default of the 2 Day SLA under both (i) and (ii), although Special Service Level Defaults under this clause (ii) shall be counted in determining the number of Special Service Level Defaults under clause (i).

(iii) If First Data has failed to meet its two (2) day requirement under the 2 Day SLA, once *** either (A) because RCSI has a reasonable belief that RCSI ***; or (B) because RCSI believes that material commercial issues [related to the First Data failure to meet the 2 day requirement under the 2 Day SLA) ***, the Parties will *** in accordance with the following (and each Party will ***:

(A) To *** RCSI will (subject to (i) First Data’s review and validation; and (i) if the Parties are unable to agree on the ***, dispute resolution in accordance with Section 17 of this Agreement):

(1) review the *** (defined as those ***);

 

 

Schedule B    B - 16    RCSI / First Data Confidential


Final Execution Version

 

(2) with assistance from First Data as necessary to complete the requirements of this Section 4.6(b)(iii)(A)(2), run *** through First Data’s query tool (or other tool or process as necessary) to extract the ***; and

(3) in accordance with the process provided in Sections 4.6(b)(iii)(A)(1) and 4.6(b)(iii)(A)(2) above as well as Section 4.6(b)(iii)(D) below, ***.

(B) To ***, RCSI will (subject to (i) First Data’s review and validation; and (ii) if the Parties are unable to agree on the ***, dispute resolution in accordance with Section 17 of this Agreement):

(1) review the list of the *** as defined in 4.6(b)(iii)(A)(1) above;

(2) with assistance from First Data as necessary to complete the requirements of this Section 4.6(b)(iii)(B)(2), run *** through First Data’s query tool (or other tool or process as necessary) to extract the ***; and

(3) in accordance with the process provided in Sections 4.6(b)(iii)(B)(1) and 4.6(b)(iii)(B)(2) above as well as Section 4.6(b)(iii)(D) below, ***.

(C) If the ***, RCSI with First Data’s assistance ((subject to (i) First Data’s review and validation; and (ii) if the Parties are unable to agree ***, dispute resolution in accordance with Section 17 of this Agreement) may *** using the approach described in Sections 4.6(b)(iii)(A) and 4.6(b)(iii)(B) above to the greatest extent practicable, and otherwise consistent with the same methodology RCSI applies with respect to its business operations at that time, consistently applied.

(D) The determination by RCSI as to which *** shall be made by RCSI using the same methodology RCSI applies with respect to its business operations at that time, consistently applied.

(c) Special Service Level for Wrong Materials

(i) The Wrong Materials Service Level (“Wrong Materials SLA”) shall be designated as a Special Service Level as set forth in the table in Exhibit B-1. The Wrong Materials SLA will be effective on April 1, 2010. Prior to the effective date of the Wrong Materials SLA, all Service Level Defaults that would otherwise be governed by this Wrong Materials SLA shall be calculated using the External Defects Critical Service Level set forth in Section 4.5(e).

(ii) A single instance of Wrong Materials will not necessarily constitute a Special Service Level Default of the Wrong Materials SLA. However, each incident of Wrong Material during a Measurement Period will incur a per incident Special Service Level Credit of ***, regardless of (A) the number of Accounts impacted; or B) the level of DPMO performance achieved in any given month.

 

 

Schedule B    B - 17    RCSI / First Data Confidential


Final Execution Version

 

(iii) Special Service Level Defaults of the Wrong Materials SLA and the corresponding Special Service Level Credits shall be calculated during each Measurement Period as follows:

(A) Each individual mail piece (e.g. each Statement Package or each Transaction Card Package) shall be a single individual opportunity in the DPMO calculation for the Wrong Materials SLA, regardless of the number of items in the Statement Package or Transaction Card Package that contain Incorrect barcodes or would otherwise constitute Wrong Material.

(B) For purposes of computing the DPMO calculation, Statements, Statement Packages and Letters will qualify as a single calculation category, and Transaction Cards and Transaction Card Packages will qualify as a single calculation category, for a total of two (2) calculation categories.

(C) For the month’s (i) total volume of Statements, Statement Packages and Letters; or (ii) total volume of Transaction Cards and Transaction Card Packages, any Wrong Materials incident or combination of Wrong Materials incidences reported in a calendar month which results in a DPMO exceeding *** but less than a DPMO of *** constitutes a Special Service Level Default of the Wrong Materials SLA and will incur a Special Service Level Credit for the Wrong Materials SLA of ***.

(D) For the month’s (i) total volume of Statements, Statement Packages and Letters; or (ii) total volume of Transaction Cards and Transaction Card Packages, any Wrong Materials incident or combination of Wrong Materials incidences reported in a calendar month which results in a DPMO exceeding *** constitutes a Special Service Level Default of the Wrong Materials SLA and will incur a Special Service Level Credit for the Wrong Materials SLA of ***.

(E) For illustrative purposes, the following example is utilized to demonstrate how the process will work.

(1) During a month’s time, *** Wrong Materials events are reported that impact a total of *** Account holders, with the following being the surrounding facts:

(2) *** Accounts are impacted per occurrence.

(3) *** Wrong Materials instance is a Statements issue, another Wrong Materials instance is a Letters issue, and the *** Wrong Materials instance is a Transaction Card Package issue.

(4) These Wrong Material instances were caused by First Data using Incorrect materials (e.g. the stock number (as identified by the barcode appearing on each insert or envelope) GE defined).

 

 

Schedule B    B - 18    RCSI / First Data Confidential


Final Execution Version

 

(5) During this same month, First Data Released into the USPS Mailstream a total of *** Statements, Statement Packages, and Letters, and a total of *** Transaction Card Packages.

(6) The DPMO calculation for the Statements, Statement Packages and Letters would be: (*** accounts impacted/*** Statements and Letters, mailed during the calendar month ) x ***= *** DPMO.

(7) The DPMO calculation for the Transaction Card Packages would be: (*** accounts impacted/*** million Transaction Cards mailed during the calendar month) x ***= *** DPMO.

(8) The monthly target threshold to avoid a Special Service Level Default of the Wrong Materials SLA is ***DPMO. Because the DPMO’s calculated in Sections 4.6(c)(iii)(E)(6) is each below *** DPMO, no Special Service Level Default of the Wrong Materials SLA has occurred for Print Production Services. However, because the DPMO for the Transaction Card Packages was ***, which falls between *** and *** DPMO, First Data would provide a credit of ***. Additionally, because *** instances of Wrong Material occurred during the Measurement Period, an additional Special Service Level Credit of *** is due (*** Wrong Materials occurrences x *** each), for a total Service Level Credit for the month of *** (subject to the relevant amount at risk pool for the month).

(iv) This Wrong Materials Special Service Level is subject to the Amount at Risk for Plastics Production Services and the Amount at Risk for Print Production Services.

(d) Notification.

For each Special Service Level Default of the 2 Day SLA or the Wrong Materials SLA, First Data shall promptly notify RCSI of such failure.

(e) Limitations.

(i) The amounts set forth in this Schedule B as Special Service Level Credits for the 2 Day SLA are not subject to the Amount at Risk for Print Production Services, and any Special Service Level Credits provided by First Data to RCSI as a result of Special Service Level Defaults of the 2 Day SLA are in addition to any Critical Service Level Credits provided by First Data.

 

  4.7 Holds and RCSI System Delays.

(a) In the event that RCSI requests a Hold First Data shall use commercially reasonable efforts to meet the applicable Service Level(s). However, any failure by First Data to achieve the applicable Service Levels shall be excused.

(b) If a Hold is initiated by First Data, First Data will not be excused from any resulting Service Level Default.

 

 

Schedule B    B - 19    RCSI / First Data Confidential


Final Execution Version

 

5. MODIFICATIONS AND IMPROVEMENTS TO SERVICE LEVELS.

 

  5.1 Addition, Deletion, and Modification of Service Levels.

As required by the RCSI Relationship Executive, but no more frequently than every ninety (90) days, RCSI and First Data will review the Service Levels and shall make adjustments to them as mutually agreed. Additionally, First Data shall add, modify and delete Service Levels, including terms regarding the costs of such additions, modifications and deletions, as mutually agreed upon between the Parties and implemented. First Data shall implement such changes described in this Section 5.1 by the date mutually agreed between the Parties.

 

  5.2 Designation of Critical Service Levels.

(a) As of the Effective Date, the Critical Service Levels are designated as “Critical” in the corresponding “Critical/Special/Tracking” column in Exhibit B-1.

(b) Upon mutual agreement, and no more frequently than every ninety (90) days, RCSI may change the designation of any Service Level to a Critical Service Level, or change the designation of any Critical Service Level to a Tracking Service Level. For clarity, the changes contemplated in this Section shall be accomplished by changing Weighting Factors, as set forth in the next Section, as well as changing the designation in the “Critical/Special/Tracking” column and “Service Level Metric” column if applicable in Exhibit B-1.

(c) First Data shall implement such changes described in this Section 5.2 as mutually agreed by the Parties.

 

  5.3 Tracking Service Levels and Special Service Levels.

(a) As of the Effective Date, the Special Service Levels are designated as “Special” in the corresponding “Critical/Special/Tracking” column in Exhibit B-1.

(b) As of the Effective Date, the Tracking Service Levels are designated as “Tracking” in the corresponding “Critical/Special/Tracking” column in Exhibit B-1.

 

  5.4 Weighting Factors.

(a) Weighting Factors for Print Production Services.

(i) For changes to the Weighting Factors for Print Production Services of more than five (5) percentage points, RCSI, in its sole discretion once during a calendar year upon sixty (60) days notice to First Data, *** the allocation of the Weighting Factor for Print Production Services for any one or more Critical Service Levels; provided, however, that the sum of the Weighting Factors for Print Production Services for all Critical Service Levels shall not exceed the Pool Percentage Available for Allocation for Print Production Services.

 

 

Schedule B    B - 20    RCSI / First Data Confidential


Final Execution Version

 

(ii) For changes to the Weighting Factors for Print Production Services of five (5) percentage points or less during a calendar year:

(A) RCSI in its sole discretion once a quarter shall provide reasonable notice to First Data of such changes and *** the allocation of the Weighting Factors for Print Production Services for any one or more Critical Print Service Levels within five (5) percentage points of the existing allocation (adjusting larger or smaller for a total range of ten (10) percentage points); provided, however, that the sum of the Weighting Factors for Print Production Services for all Critical Print Service Levels shall not exceed the Pool Percentage Available for Allocation for Print Production Services.

(B) At no time during a calendar year may *** adjust the Weighting Factors for Print Production Services so that the revised allocation per Service Level exceeds five points (either lesser or greater) of the original allocation per Service Level for that calendar year.

(b) Weighting Factors for Plastics Production Services.

(i) For changes to the Weighting Factors for Plastics Production Services of more than five (5) percentage points, RCSI, in its sole discretion, once during a calendar year upon 60 days notice, *** of the Weighting Factor for Plastics Production Services for any one or more Critical Service Levels upon written notice to First Data; provided, however, that the sum of the Weighting Factors for Plastics Production Services for all Critical Service Levels shall not exceed the Pool Percentage Available for Allocation for Plastics Production Services.

(ii) For changes to the Weighting Factors for Plastics Production Services of five (5) percentage points or less during a calendar year:

(A) RCSI in its sole discretion once every quarter shall provide reasonable notice to First Data of such changes and *** the allocation of the Weighting Factors for Plastics Production Services for any one or more Critical Plastics Service Levels within five (5) percentage points of the existing allocation (adjusting larger or smaller for a total range of ten (10) percentage points); provided, however, that the sum of the Weighting Factors for Plastics Production Services for all Critical Plastics Service Levels shall not exceed the Pool Percentage Available for Allocation for Plastics Production Services.

(B) At no time during a single calendar year may RCSI adjust the Weighting Factors for Plastics Production Services so that the revised allocation exceeds five points (either lesser or greater) of the original allocation for that calendar year.

 

6. QUALITY-RELATED SERVICE LEVELS

 

  6.1 Print Service Levels.

(a) For those quality-related Critical Print Service Levels that (i) utilize a DPMO calculation; and (ii) are so indicated in Exhibit B-1, as of the Effective Date, a DPMO of *** (*** Sigma) shall apply.

 

 

Schedule B    B - 21    RCSI / First Data Confidential


Final Execution Version

 

(b) If during any month up until June 30, 2010, First Data commits a Service Level Default of any quality-related Critical Print Service Levels, the following terms shall apply:

(i) First Data is not responsible to pay a Service Level Credit for a Service Level Default during that month if the DPMO measurement is above *** DPMO but lower than or equal to *** DPMO. First Data will then have a sixty (60) day period during which First Data can cure that Service Level Default and not incur any Service Level Credit. If after sixty (60) days, First Data is unable to cure the Service Level Default, First Data will provide RCSI with a Service Level Credit for a Service Level Default of greater than *** DPMO. For example, if First Data commits a Service Level Default of the Statement Accuracy Service Level because at the end of January 2010 the DPMO for the month of January was ***, First Data will not provide RCSI a Service Level Credit for such Service Level Default. First Data will not provide RCSI with a Service Level Credit after February or March 2010 if the DPMO remains *** as February and March constitute the cure period. However, if after the month of April, the DPMO for the Statement Accuracy Service Level remains ***, First Data will provide RCSI with a Service Level Credit at the end of April.

(ii) If a Service Level Default of any quality-related Critical Print Service Levels exceeds *** DPMO at any time after the Effective Date, First Data will provide a Service Level Credit to RCSI with no opportunity to cure such Service Level Default.

 

  6.2 Plastics Service Levels.

For all quality-related Critical or Tracking Plastics Service Levels that utilize a DPMO calculation, as of the Effective Date the DPMO calculation that shall apply is *** DPMO.

 

7. RELATIONSHIP BETWEEN THIS AGREEMENT AND THE TSA REGARDING SERVICE LEVELS

(a) During the Term, there is a complete exclusion from Service Level Credits or other remedies for TSA caused issues, except as set forth in Section 7(b).

(b) Termination Rights Events. After November 1, 2012 if *** is caused by First Data’s performance under the TSA instead of under this Agreement, no *** applies but (in addition to whatever rights and remedies RCSI has under the TSA) RCSI will have Termination Right Events rights under this Agreement on the same basis as if the breach were caused under this Agreement. For the sake of clarity, this means that although no *** will be payable to RCSI for *** for TSA caused issues, RCSI will apply any *** for TSA caused issues for purposes of the Termination Rights Events under Section 18.1(a)(iv) of this Agreement. Prior to November 2012, RCSI will not apply any *** for TSA caused issues for purposes of the Termination Rights Events under Section 18.1(a)(iv) of this Agreement.

(c) External Defects. For TSA caused PSA impacting issues, First Data will provide email notification to RCSI the same day of identification of the issue

 

 

Schedule B    B - 22    RCSI / First Data Confidential


Final Execution Version

 

or within twenty-four (24) hours. The RCSI PSA and TSA teams will be involved in the issue resolution discussions. First Data will follow up with a preliminary Root Cause Analysis within seven (7) Production Days and a final Root Cause Analysis no later than thirty-seven (37) Production Days. Preliminary Root Cause Analysis will include root cause, description of impact to RCSI and any preventative actions that have been identified to that point.

(d) TSA caused issues that do not meet the criteria of a defined TSA Service Level are jointly evaluated by First Data and RCSI to determine if the issue has significant impact to be logged as an Other Business Impact (OBI) for purposes of reporting and Root Cause Analysis. Criteria for evaluation of impact have been agreed as of the Effective Date and any changes to the OBI criteria shall be mutually agreed upon by the Parties.

(e) TSA Caused/PSA Impacting OBI’s will follow defined OBI reporting and RCA related processes.

(f) TSA Caused/PSA impacting OBI’s will be included in the Monthly Performance Report. Reporting will include: 1) number of issues within the reporting month, and 2) a brief description of each issue.

(g) Assessment of whether a Service Level Default was caused by a TSA-caused or PSA-caused issue will be based on the root cause of the issue. For example, a TSA caused embossing accuracy issue would be assessed against a TSA Embossing Accuracy Service Level (if in existence) vs. a PSA embossing accuracy Service Level.

(h) TSA and PSA Service Levels do not create an opportunity for the assessment of a monetary penalty in both Agreements based on the same Defect.

 

 

Schedule B    B - 23    RCSI / First Data Confidential


Final Execution Version

EXHIBIT B-1

SERVICE LEVEL METRICS

 

I. DEFINITIONS.

 

  A. The following capitalized terms will have the meanings given them below:

 

  1. Card Cycle Time” means the elapsed time in Business Days beginning on Day 0 and ending at the time that the Transaction Cards and Transaction Card Packages included in that Transaction Card cycle are Released into the USPS Mail Stream. The Card Cycle Time for a particular Transaction Card cycle will be the date and time set forth in the Service Level descriptions in Schedule B, Exhibit B-1 or in the RCSI Rules. In the event of a conflict between the Service Level descriptions in this Agreement and the RCSI Rules, the Service Level descriptions in this Agreement shall control.

 

  2. Daily Letters” means Letters that are automatically triggered by the First Data System and do not require a release notification prior to printing.

 

  3. Day 0” means the night of a processing cycle and ends at 11:59 p.m.

 

  4. Day 1” means the first Production Day, Business Day, or Working Day following Day 0 of a processing cycle and ends at 11:59 p.m.

 

  5. Day 2” means the second Production Day, Business Day, or Working Day following Day 0 of a processing cycle and ends at 11:59 p.m.

 

  6. Day 3” means the third Production Day, Business Day, or Working Day following Day 0 of a processing cycle and ends at 11:59 p.m.

 

  7. Day 4” means the fourth Production Day, Business Day, or Working Day following Day 0 of a processing cycle and ends at 11:59 p.m.

 

  8. Day 5” means the fifth Production Day, Business Day, or Working Day following Day 0 of a processing cycle and ends at 11:59 p.m.

 

  9. Letter Cycle Time” means the elapsed time in Business Days beginning on Day 0 and ending at the time the Letters are Released into the USPS Mailstream. The Letter Cycle Time for a specific Letter type is set forth in the Service Level descriptions in Schedule B, Exhibit B-1 or in the RCSI Rules. In the event of a conflict between the Service Level descriptions in this Agreement and the RCSI Rules, the Service Level descriptions in this Agreement shall control.

 

 

Exhibit B-1   B-1 - 1   RCSI / First Data Confidential


Final Execution Version

 

  10. ***

 

  11. Priority Daily Letters” means Letters that are automatically triggered by the First Data System and do not require a release notification prior to printing, and for which RCSI identifies a Letter Cycle Time requirement that is not to exceed one (1) day.

 

  12. Recovery Letter” means a Letter, requested by RCSI, due to a Service Level Default of the 2 Day SLA, or a production Hold “run without” scenario after which RCSI would require First Data to send a separate Letter.

 

  13. Response Required Deadline Determined (R2D2) Letters” means Letters that are automatically triggered by the RCSI System and that specify a response from the recipient prior to a deadline specified by RCSI or an RCSI Customer.

 

  14. Special Letters” means Letters that are force triggered by RCSI and not automatically triggered by the First Data System, the RCSI System, or co-mingled with Daily Letters, and require an email or hard copy communication from RCSI for print release. The Letter Cycle Time for Special Letters will be mutually agreed between the Parties on a case-by-case basis. Priority legal letters (excluding Recovery Letters) shall be a subset of Special Letters.

 

  15. Statement Cycle Time” means the elapsed time in Production Days beginning on Day 0 and ending at the time that the Statements and Statement Packages included in that Statement cycle are Released into the USPS Mail Stream. The Statement Cycle Time for Statements and Statement Packages is set forth in the Service Level descriptions in Schedule B, Exhibit B-1 or the RCSI Rules. In the event of a conflict between the Service Level descriptions in this Agreement and the RCSI Rules, the Service Level descriptions in this Agreement shall control.

 

  B. Other capitalized terms used in this Exhibit B-1, but not defined above, are defined where they are used or elsewhere in this Agreement, and have the meanings there indicated.

 

 

Exhibit B-1   B-1 - 2   RCSI / First Data Confidential


Final Execution Version

 

II. SERVICE LEVELS.

 

  A. Service Levels containing (*) shall be subject to the Section 6.1(a) of Schedule B.

 

  B. Service Levels containing (**) will begin being measured on August 20, 2009.

 

  C. Service Levels containing (***) shall be assigned a single Weighting Factor for Print Production Services or a single Weighting Factor for Plastics Production Services. That assigned Weighting Factor will be applied consistently to each Service Level calculation under that particular Service Level and will not vary between RCSI Customers or between Product Categories.

 

  D. Under the 2 Day SLA, First Data will use commercially reasonable efforts to maintain a process for each billing cycle under which approximately *** to *** of Statements and Statement Packages are mailed on Day One, and the remainder of Statements and Statement Packages are mailed on Day 2 of the cycle. For the avoidance of doubt, this Section II.D does not constitute either (A) a condition or component of the 2 Day SLA under Section 4.1(b) of Schedule B; or (B) a separate Service Level.

 

  E. Unless otherwise noted, all Service Levels will be measured at the conclusion of a Measurement Period.

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement
Period

  

Service Level
Metric

Timeliness – Print Services for Statements and Other Correspondence (Excluding Letters) for all Product Categories
  

2 Day SLA: Paper Statements, Statement Packages, Electronic Statements, Reruns/Reprints**

 

The 2 Day SLA measures the monthly Statement volume (measured by a percentage) that exceeds the applicable Statement Cycle Times for each of Paper Statement timeliness, and Rerun/Reprint timeliness and the one (1) day Electronic Statement timeliness period based on the total calculation of the three Statement types.

  

Special

Per Section 4.6(b) of Schedule B

    NA        NA       Formscan    Monthly    *** of Paper Statements, Statement Packages, Electronic Statements, and Rerun/Reprints are completed in accordance with the calculation provided for this Special Service

 

 

Exhibit B-1   B-1 - 3   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
  Weighting
Factor –
Plastic
Services
  

Measurement

Tool

  

Measurement
Period

  

Service Level
Metric

  

The calculation for the 2 Day SLA is as follows:

 

[(Total number of Paper Statements and Reprint/Reruns (if any in that Measurement Period) that complete within the applicable Statement Cycle Time) + (the total number of Electronic Statements that are delivered to the eMessenger web server by the completion of ***)] divided by [(the total number of Paper Statements and Reprint/Reruns that were Released into the USPS Mailstream) + (the total number of Electronic Statements that were delivered to the eMessenger web server)].

 

I. Paper Statements and Statement Packages

 

All Paper Statements and Statement Packages (excluding Replacement Statements) shall maintain a Statement Cycle Time of ***) Production Days.

 

II. Electronic Statements:

 

First Data will provide all Electronic Statements to the eMessenger web server within *** Production Day of Day Zero.

               

Level in the Function and Service Level Description column, subject to the Special Service Level Credit structure in Section 4.6(b) (which remedies proposed in Section 4.6(b) are the exclusive remedy for breach of this 2 Day SLA) of Schedule B.

 

For the sake of clarity, *** of all Paper Statements and Statement Packages will be completed in 2 days, *** of Electronic Statements will be completed in ***, and *** of Reruns/Reprints will be completed in accordance with Romanette III of the Function and

 

 

Exhibit B-1   B-1 - 4   RCSI / First Data Confidential


Final Execution Version

 

Reference
Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
  Weighting
Factor –
Plastic
Services
  

Measurement

Tool

  

Measurement
Period

  

Service Level

Metric

  

III. Rerun/Reprint

 

(a) For purposes of calculating the time period during which First Data must Release into the USPS Mailstream the Statements and/or Statement Packages required to be Rerun/Reprint (i.e. the reset period of the 2 Day SLA for Statements and/or Statement Packages that need to be Rerun/Reprinted), Day One is the day that RCSI releases the Rerun/Reprint file to First Data by 6:00 am CT.

 

(b) If First Data causes the need to Rerun/Reprint the Paper Statements and/or Statement Packages, First Data must have the materials required to be Rerun/Reprint Released into the USPS Mailstream is by the end of Day Two.

 

(c) If RCSI causes the need to Rerun/ Reprint the Paper Statements and/or Statement Packages:

 

(i) First Data must have the Statements and/or Statement Packages required to be Rerun/Reprint Released into the USPS Mailstream by the end of Day 2 for Reruns/Reprints with a volume of less than or equal to *** Units; or

                Service Level Description column for this Service Level.

 

 

Exhibit B-1   B-1 - 5   RCSI / First Data Confidential


Final Execution Version

 

Reference
Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement
Period

  

Service Level

Metric

   (ii) First Data must have the Statements and Statement Packages required to be Rerun/Reprint Released into the USPS Mailstream by the end of Day 4 for Reruns/Reprints with a volume of more than *** Units.                
2.6    In the event that there is a Special Service Level Default of the 2 Day SLA, First Data will provide Account detail reporting to RCSI by the end of Day 5 after the occurrence. ***    Critical     20     NA       Formscan    Monthly    *** within five (5) Production Days
Timeliness – Letters (All Product Categories)              
10   

Recovery Letters

 

The Letter Cycle Time for Recovery Letters is *** Business Days.

 

For Recovery Letters for which First Data receives the Recovery Letter file directly from RCSI, Day One is the day the file is received at First Data by 6:00 am CT.

 

This Recovery Letters Service Level has no Weighting Factor assigned.

 

This Service Level measures the number of occurrences during a

   Critical     NA        NA       Formscan    Monthly   

*** of the *** Letter Cycle Time for Recovery Letters results in a Service Level Credit.

 

The *** of the *** Letter Cycle Time for Recovery Letters results in a *** Service Level Credit. *** of the *** Letter Cycle Time for Recovery Letters thereafter within the same

 

 

Exhibit B-1   B-1 - 6   RCSI / First Data Confidential


Final Execution Version

 

Reference
Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement
Period

  

Service Level

Metric

  

Measurement Period that First Data fails to meet the Recovery Letter Cycle Time. For purposes of this Service Level, each “Occurrence” is based upon each Recovery Letter file grouping that is Released into the USPS Mailstream (i.e. not each individual Unit mailed per grouping of letters).

 

For the sake of clarity, this Service Level is an exception to Section 4.5(d) of Schedule B.

 

This Critical Service Level is subject to the Amount at Risk for Print Production Services.

                Measurement Period results in a *** Service Level Credit.
10.1   

Daily Letters and Replacement Statements

 

The Letter Cycle Time for Daily Letters and Replacement Statements is four (4) Business Days.

   Tracking     NA        NA       Formscan    Monthly    ***
10.2   

Special Letters

 

The Letter Cycle Time for Special Letters will be mutually agreed by the Parties on a per occurrence basis. First Data shall comply with the mutually agreed upon timelines.

   Tracking     NA        NA       Formscan    Monthly    ***
10.3   

Response Required Deadline Determined (R2D2)

 

The Letter Cycle Time for R2D2 Letters is two (2) Business Days.

   Tracking     NA        NA       Formscan    Monthly    ***

 

 

Exhibit B-1   B-1 - 7   RCSI / First Data Confidential


Final Execution Version

 

Reference
Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement
Period

  

Service Level

Metric

10.4(b)   

Priority Daily Letters

 

The Letter Cycle Time for Priority Daily Letters is one (1) Business Day.

   Tracking     NA        NA       Formscan    Monthly    ***
10.5   

Daily ABC / Offline Letters

 

The Letter Cycle Time for ABC/Offline Letters is five (5) Business Days.

   Tracking     NA        NA       Formscan    Monthly    ***
10.6   

Daily Certified Mail Letters

 

The Letter Cycle Time for Daily Certified Mail Letters is one (1) Business Day for the initial *** of Daily Certified Mail Letters and two (2) Business Days for the remaining *** of Daily Certified Mail Letters.

   Tracking     NA        NA       Formscan    Monthly    *** of Daily Certified Mail Letters shall complete on Day 1; and *** of Daily Certified Letters shall complete on Day 2
10.4 (b)   

*** Letters

 

The Letter Cycle Time for all *** Letters is one (1) Production Day.

   Tracking     NA        NA       Formscan    Monthly    ***
Accuracy – Print Production Services – Internal Defects      
8.2   

Statements, Statement Packages, and Letters – Accuracy *

 

This Service Level measures the accuracy of Statements, Statement Packages and Letters through a DPMO calculation based on the amount of Internal Defects found during the internal sampling processes.

   Critical     40     NA       Outgoing Quality Level (OQL) Application    Monthly    First Data shall maintain a DPMO of at least *** in accordance with Section 6.1 of Schedule B.

 

 

Exhibit B-1   B-1 - 8   RCSI / First Data Confidential


Final Execution Version

 

Reference
Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

  Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement
Period

  

Service Level

Metric

   The Swing Arm Inserter, High Speed Inserter, Manual Work Stations, and Random Quality Sampling Service Levels will all be measured on an individual tracking basis. The aggregate of the four aforementioned Service Levels will comprise the overall DPMO calculation of this Service Level.                
8.2.1   

Swing Arm Inserter – Accuracy

 

This Service Level measures the accuracy of Statements, Statement Packages and Letters through a DPMO calculation based on the amount of Internal Defects found during the swing arm inserter sampling processes.

 

For every Statement processed on swing arm inserter equipment, First Data will sample every RCSI job run.

 

First Data will sample at a rate (plus or minus 5%) of one piece randomly selected by the system for every 500 pieces run.

   Tracking     NA        NA       Outgoing Quality Level (OQL) Application   

Monthly

   DPMO of ***

 

 

Exhibit B-1   B-1 - 9   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
     Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

  

The Parties may mutually agree to change the sample size at any time.

 

First Data will check and report the sample data by job, client number (or by client when possible when requested by RCSI) and equipment type.

                 
8.2.2   

High Speed Inserter – Accuracy

 

This Service Level measures the accuracy of Statements, Statement Packages and Letters through a DPMO calculation based on the amount of Internal Defects found during the high speed inserter internal sampling processes.

 

For work that is completed on high speed inserter equipment, First Data will sample every RCSI job run.

 

First Data will sample at a rate (plus or minus 5%) of one piece randomly selected by the system for every 2500 pieces run.

 

The Parties may mutually agree to change the sample size at any time.

 

First Data will check and report the sample data by job, client number (or by client when possible when requested by RCSI) and equipment type.

   Tracking      NA         NA       Outgoing Quality Level (OQL) Application    Monthly    DPMO of ***

 

 

Exhibit B-1   B-1 - 10   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
     Weighting
Factor –
Plastic
Services
    

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

8.2.3   

Manual Work Stations

 

This Service Level measures the accuracy of Statements, Statement Packages and Letters through a DPMO calculation based on the amount of Internal Defects found during the manual work stations internal sampling processes.

 

For work that is completed at manual work stations, First Data will sample every RCSI job run.

 

First Data will sample at a rate (plus or minus 5%) of one piece randomly selected by the operator for each job.

 

The Parties may mutually agree to change the sample size at any time.

 

First Data will check and report the sample data by job, client (or by client when possible when requested by RCSI) and equipment type.

   Tracking      NA         NA       Outgoing Quality Level (OQL) Application    Monthly    DPMO of ***
8.2.4   

Random Quality Sampling – Accuracy

 

This Service Level measures the accuracy of Statements, Statement Packages and Letters through a

   Tracking      NA         NA       Outgoing Quality Level (OQL) Application    Monthly    DPMO of ***

 

 

Exhibit B-1   B-1 - 11   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
     Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

  

DPMO calculation based on the amount of Internal Defects found during the random quality internal sampling processes.

 

First Data will pull a minimum of *** samples (plus or minus ***) at random for each Production Day.

 

The Parties may mutually agree to change the sample size at any time.

 

First Data will check and report the sample data by job, client number (or by client when possible when requested by RCSI) and equipment type.

                
Accuracy – Plastics Production Services – Internal Defects
9.2   

Plastics Production Services – Accuracy

 

This Service Level measures the accuracy of Transaction Cards and Transaction Card Packages by calculating the DPMO based on the Internal Defects found during the internal sampling processes.

 

First Data shall achieve at a minimum the monthly average DPMO of *** (or *** Sigma) for all Transaction Cards and Transaction Card Packages produced during a Measurement Period.

   Critical      NA         25   Outgoing Quality Level (OQL) Application    Monthly    First Data shall maintain a DMPO of at least *** (or *** Sigma).

 

 

Exhibit B-1   B-1 - 12   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

Accuracy – Wrong Materials and External Defects
11.1   

Wrong Materials (Includes both Print Services and Plastics Services)

 

The Wrong Materials Special Service Level is described in detail in Section 4.6(c) of Schedule B.

   Special per Section 4.6(c) of Schedule B      NA        NA      EDTS application (External Defect Tracking System)    Monthly    The metric and accompanying Special Service Level Credits are described in Section 4.6(c) of Schedule B.
11.2   

All External Defects other than Wrong Materials for Print Services***

 

This Service Level measures the total number of occurrences of External Defects during a Measurement Period. The External Defects Critical Service Level is described in detail in Section 4.5(e) of Schedule B.

   Critical      40     NA      EDTS application (External Defect Tracking System)    Monthly    The metric and accompanying Special Service Level Credits are described in Section 4.5(e) of Schedule B.
11.3   

All External Defects other than Wrong Materials for Plastics Services***

 

This Service Level measures the total number of occurrences of External Defects during a Measurement Period. The External Defects Critical Service Level is described in detail in Section 4.5(e) of Schedule B.

   Critical      NA        25   EDTS application (External Defect Tracking System)    Monthly    The metric and accompanying Special Service Level Credits are described in Section 4.5(e) of Schedule B

 

 

Exhibit B-1   B-1 - 13   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

Timeliness – Plastics Production Services
5.6   

All Transaction Cards and Transaction Card Packages (excluding Re-Issue, Mass, and Natural Re-issue Transaction Cards)***

 

The Card Cycle Time for daily Transaction Cards and Transaction Card Packages is *** in two (2) Business Days and *** in three (3) Business Days. For the sake of clarity, *** Transaction Card Packages are included in this Service Level. This Service Level calculation will be made in accordance with Section 4.5(d) of Schedule B.

   Critical      NA        25   CardTrack II    Monthly   

*** within two (2) Business Days

 

*** within three (3) Business Days

5.8   

For *** plastics only:

 

The Card Cycle Time for *** Transaction Cards and Transaction Card Packages is one (1) Business Day.

 

For those *** Transaction Cards and Transaction Card Packages not mailed within one (1) Business Day, First Data will provide an explanation in writing defining why the *** Transaction Card Package was not produced and mailed in accordance with this Service Level.

   Tracking      NA        NA      CardTrack II    Monthly    *** within one (1) Business Day

 

 

Exhibit B-1   B-1 - 14   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

5.10    ***only:***    Critical      NA        5   CardTrack II    Monthly    ***
  

The Card Cycle Time for *** Transaction Cards and Transaction Card Packages is the same day that First Data receives the embossing file.

 

For illustrative purposes, First Data receives the file by 2:00 am CT, they will be produced and mailed by close of business the same day. This does not apply to mass reissues and natural reissues.

 

This Service Level calculation will be made in accordance with Section 4.5(d) of Schedule B.

               
6.1   

Same Day Plastics Cycle time for files received after 3 p.m. EST ***

 

The Card Cycle Time for Same Day Transaction Cards received by First Data after 3:00 p.m. ET is the next Business Day for *** and is Day 2 for ***.

 

This Service Level calculation will be made in accordance with Section 4.5(d) of Schedule B.

   Critical      NA        5   CardTrack    Monthly   

*** Next business day,

*** Day 2 (Business Days only)

6.2   

Same Day Plastics Cycle time for files received before 3 p.m. EST ***

 

The Card Cycle Time for Same Day

   Critical      NA        5   CardTrack    Monthly    *** same Business Day; *** next Business Day

 

 

Exhibit B-1   B-1 - 15   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

  

Transaction Cards received by First Data at or before 3:00 p.m. ET is the same Business Day for *** and is the next Business Day for ***.

 

This Service Level calculation will be made in accordance with Section 4.5(d) of Schedule B.

               
7.1   

Mass Reissue Transaction Cards

 

The Parties will agree on the Card Cycle Time for mass re-issue Transaction Cards and Transaction Card Packages on a per event basis.

 

The mass reissue timeliness calculation will be the percentage calculated as:

 

The number of mass re-issue items actually mailed on time at the end of the Measurement Period / all mass re-issue items mailed during the Measurement Period.

   Tracking      NA        NA      CardTrack II    Monthly    *** of the agreed Card Cycle Time
7.2   

Natural Reissue Transaction Cards and Transaction Card Packages ***

 

First Data will produce and mail each embossing tape within fifteen (15) Business Days of receipt by First Data, with a commitment of all packages produced and mailed by the last day of the month prior to the month of the expiration date.

   Critical      NA        10%      CardTrack II    Monthly    *** of the full reissue file will be completed within fifteen (15) Business Days of receipt by First Data but in no event not later than the last day of the month

 

 

Exhibit B-1   B-1 - 16   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

   This Service Level calculation will be made in accordance with Section 4.5(d) of Schedule B.                 prior to the month of expiration of the Transaction Card for each Account
Timeliness – Inventory of all Production Services
12.1   

Inventory Receiving

 

First Data shall log into the system and make “production ready” all materials received within forty-eight (48) hours from the time of receipt at the dock to the time the data is logged into the First Data System

   Tracking      NA        NA      Material Management System (MMS)    Monthly    *** In 2 Working Days, *** in 3 Working Days.
Accuracy – Inventory
  

Inventory – Accuracy

 

First Data shall input all inventory data into the system correctly, including the First Data item number, weights, thickness etc.

   Tracking      NA        NA      Material Management System (MMS)    Monthly    ***
  

First Data Service Center Tickets

 

First Data shall acknowledge all tickets received by the First Data Service Center (as more fully described under the TSA) within two (2) hours of receipt by First Data.

   Tracking      NA        NA      Service Center Reporting Tool    Monthly    ***

 

 

Exhibit B-1   B-1 - 17   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

Reporting – Timeliness
13.1   

Reporting – Timeliness

 

First Data shall provide *** of reports to RCSI on or before:

 

•    Daily reports: Report generated and addressed to RCSI and sent to the First Data email server by 10 a.m. Eastern Time each Working Day.

 

•    Weekly reports: Report generated and addressed to RCSI and sent to the First Data email server by 5 p.m. Eastern Time on the first Working Day of each week.

 

•    Monthly reports: Monthly reports to be delivered in accordance with Schedule B 3.3 (a)(i, ii, and iii)

 

•    Quarterly reports: Provided as mutually agreed.

 

NOTE: Automated reports will be provided in Production Days, and manual reports will be provided on Working Days unless otherwise noted in Schedule G (Reports).

   Tracking      NA        NA      Manual    Monthly    ***

 

 

Exhibit B-1   B-1 - 18   RCSI / First Data Confidential


Final Execution Version

 

Reference

Number

  

Function and Service Level

Description

  

Critical /
Special/

Tracking

   Weighting
Factor –
Print
Services
    Weighting
Factor –
Plastic
Services
   

Measurement

Tool

  

Measurement

Period

  

Service Level

Metric

Reporting – Accuracy
  

*** of reports do not require rework or revision due to any inaccuracy and do contain sufficient data for reconciliation by RCSI.

 

The calculation for this Service Level will be the total number of correct reports per month divided by the total number of reports. The method of determining whether a report is inaccurate is whether either Party identifies such report as inaccurate

   Tracking      NA        NA      Manual    Monthly    ***

 

 

Exhibit B-1   B-1 - 19   RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT B-2

CTQ’S

I. PLASTICS PRODUCTION SERVICES CTQ’S

The following chart describes the CTQs for the Plastics Production Services.

 

CARDS                           Page 1
Voice of Client   CTQ Name   Requirement Description   Impact Category                
Contents Secured   OME Seal Correct   Outer Mailing Envelop is properly sealed according to processing requirements   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    OME: Sealed Improperly   Envelope not completely sealed per requirements. Plastics: Sealed within 2 inches from edge of flap. OR if requirements are “to not seal”, it was sealed.   Compliance   Sev 1   Yes       Yes
    OME: Sticking   Account/mailpieces sticking together, OR outer mailing envelope sticking to contents.   Relationship   Sev 3       Yes   If requested
    OME/BRE Address Visible   Outer Mailing & Business Reply Envelope addresses are meeting USPS requirements   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA

 

Exhibit B-2    B-2 - 1    RCSI / First Data Confidential


Final Execution Version

 

    OME/BRE: Address/Barcode Not Visible or within USPS Clear Zone Specs  

USPS Tap Test Failure for Outer Mailing Envelope due to Incorrect positioning of Address(es) or Barcodes in window(s) Minimum 1/25th” vertical space when tap down (dime width) & Minimum 1/8th” horizontal space when tap left or right, between barcode and other printing, window or label edges.

* Complete Address not Visible—

Masked: Insert, BRE flap, or Form corner folded in front of address.

OR Orientation: Inserted upside down, or backwards. OR Window alignment/programming incorrect.

  Relationship   Sev 3       Yes   If requested
    All Pages/Cards Present   All form pages and cards are present for one and only one customer, including correct card quantity per BOM   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Card & Carrier: mismatch   Attachment of a personalized plastic to a printed card carrier with acct. information different than that found on the card.   Compliance   Sev 1   Yes       Yes

 

Exhibit B-2    B-2 - 2    RCSI / First Data Confidential


Final Execution Version

 

    Card: Quantity wrong   Failure of a cardcarrier to contain the correct number of cards as part of the completed account/mailpiece. (Card Carrier could be empty/short a card, or could be non receipt of entire mailpiece)   Relationship   Sev 1   Yes       Yes
    Card: duplicated   Production of two or more identical personalized plastics when only one was required. Caught Internally or Mailed.   Relationship   Sev 2       Yes   If exceeds threshold
    Form: Print Wrong Duplex   Backer ID Code on back of form does not match front code for Duplex product (Print Class E & F). Potential for two Customers-specific information to be on one physical page. I.e. the two Print engines were not matched prior to printing or after a crash.   Relationship   Sev 1   Yes       Yes
    Form: Double Stuff   More than one customers physical pages in one account/mailpiece. Relates to single and multipage products.   Compliance   Sev 1   Yes       Yes
    Form: Multipage Separation   Customers pages separated, not all contained in same account/mailpiece, or missing document.   Compliance   Sev 1   Yes       Yes

 

Exhibit B-2    B-2 - 3    RCSI / First Data Confidential


Final Execution Version

 

    Form: Duplicated   Production of two or more documents containing identical acct. information when only one was required.—Caught Internally or Mailed.   Relationship   Sev 3       Yes   If requested
CARDS                           Page 2
Correct BOM   Card Stock Correct   Plastic card stock used is correct per bill of materials   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Card: Wrong Card Stock Used   Personalizing a plastic with acct. information on a stock # other than the one called for by the bill of materials.   Relationship   Sev 1   Yes       Yes
    Label Stock Correct   Card Activation Label is correct per bill of materials   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Label: Missing   Failure to apply the card activation label called for in the bill of materials to a plastic.   Relationship   Sev 2       Yes   If exceeds threshold
    Label: Wrong   Application of a card activation label to a plastic other than the label called for in the bill of materials. Or label applied though BOM has ‘None’   Relationship   Sev 2       Yes   If exceeds threshold
    Label: Double   Same card activation label applied twice to the same plastic.   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 4    RCSI / First Data Confidential


Final Execution Version

 

    Form Type Correct   Card Carrier Stock is correct per bill of materials   Relationship                
    Form: Wrong Form Type Used   Preprinted Vendor form type doesn’t match form type in Control Line per BOM(Bill of Materials)/ tracking system.   Relationship   Sev 1   Yes       Yes
    Inserts/BRE Correct   Inserts & BRE used are coorect per bill of materials   Relationship                
    Insert/BRE: Wrong (Marketing Insert)   Placing an insert/BRE into an account/Mailpiece other than the one required by the BOM/bill of materials.   Relationship   Sev 3       Yes   If exceeds threshold
    Insert/BRE: Wrong (T&C,APR,Legal Insert)   Placing an insert/BRE into an account/Mailpiece other than the one required by the BOM/bill of materials.   Compliance   Sev 1   Yes       Yes
    Insert/BRE: Missing (Marketing Insert)   Failure to place an insert/BRE required by the bill of materials in the account/mailpiece   Relationship   Sev 3       Yes   If exceeds threshold
    Insert/BRE: Missing (T&C, APR, Legal Insert)   Failure to place an insert/BRE required by the bill of materials in the account/mailpiece   Compliance   Sev 1   Yes       Yes
    Insert/BRE: Multiple   More than one of the SAME insert /BRE in the account/mailpiece unless specified by BOM/Bill of Materials.   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 5    RCSI / First Data Confidential


Final Execution Version

 

    OME Correct   Outer Mailing Envelope used is correct per bill of materials   Relationship                
    OME: Wrong   Outer Mailing Envelope other than the one called for on Bill of Materials was used.   Relationship   Sev 2       Yes   If exceeds threshold
CARDS                           Page 3
Correct Personalization   Physical Product Appearance   Embossed/Ultragraphic characters, and Visual appearance & functionality of form/cards acceptable   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Card: Defective / Damaged   Plastic received from the vendor has cosmetic or functional defects. (e.g. spots, discoloration, damaged, scratches, missing signature panel, Missing/Wrong Flying Security Symbol)   Relationship   Sev 1   Yes       Yes
    Card: BIN missing   Absence of a bank identification number on the front side of a plastic when required by the client.   Relationship   Sev 3       Yes   If requested
    Card: Missing/Wrong data   Embossed data on a personalized plastic is incorrect or incomplete. e.g. “valid to” date is just one month later than the “valid from” date; OR name or expiration date is missing.   Relationship   Sev 1   Yes       Yes

 

Exhibit B-2    B-2 - 6    RCSI / First Data Confidential


Final Execution Version

 

    Card: Wrong Format   The format of embossed characters on a personalized plastic do not adhere to specific standards established by MasterCard & Visa, ISO & ANSI or specific clients. e.g. missing Pac-man die.   Relationship   Sev 3       Yes   If requested
    Embossing: Popcorned   Two or more of the tops or bottoms of embossed characters on a personalized plastic fail to appear evenly in a horizontal straight line.   Relationship   Sev 3       Yes   If requested
    Tipping: Over/Under   Tipping Foil applied to embossed characters is too heavy or too light. (Burnt/Partial)   Relationship   Sev 3       Yes   If requested
    Tipping: Wrong color   Failure to apply the correct tipping foil color to the raised/embossed characters on a plastic as called for by the bill of materials.   Relationship   Sev 3       Yes   If requested
    Label: Placement Issue   Application of any part of a card activation label that is too low, high, crooked, or upside down. Label on the face of a plastic interferes with the embossing and tipping of the raised characters, or goes over top edge of plastic.   Relationship   Sev 3       Yes   If requested
    Hologram: Defective   Hologram Defective from Vendor. E.g. Missing, partial, misaligned, scratched, or double on the plastic.   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 7    RCSI / First Data Confidential


Final Execution Version

 

    Photo: Quality Issue   Misaligned photo on a photocard plastic allowing a portion of the white background in the plastic photo box to be visible. OR Photo lacks clarity or proper color.   Relationship   Sev 2       Yes   If exceeds threshold
    Ultragraphics: Quality Issue   Failure to apply complete required ultragraphics logo, or application of logo/characters over existing logos/characters on the front or back of a processed plastic.   Relationship   Sev 3       Yes   If requested
    Ultragraphics: Wrong color   Application of a particular color of ultragraphics foil to the front or back of a processed plastic other than the one called for by the bill of materials.   Relationship   Sev 3       Yes   If requested
    Ultragraphics: Wrong logo   Application of an ultragraphics logo/characters on the front or back of a processed plastic other than the one required by the client.   Relationship   Sev 2       Yes   If exceeds threshold
CARDS                           Page 4
Correct Personalization   Physical Product Appearance   Embossed/Ultragraphic characters, and Visual appearance & functionality of form/cards acceptable   Relationship                

 

Exhibit B-2    B-2 - 8    RCSI / First Data Confidential


Final Execution Version

 

    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Mag Stripe: Damaged   Inability to encode a plastic with acct. information due to mag stripe damage. The magnetic strip is visibly damaged. When the card is checked on the Inspec 9000, there are areas of red shown.   Relationship   Sev 1   Yes       Yes
    Mag Stripe: Missing/Partial   Inability to encode a plastic with acct. information due to a missing/partial mag stripe.   Relationship   Sev 1   Yes       Yes
    Encoding: Data Wrong   Failure of the encoded data on the mag stripe of a personalized plastic to match the embossed data.   Relationship   Sev 1   Yes       Yes
    Signature Panel Indent: Quality Issue   Signature Panel on back of personalized plastic has Missing, Partial or Popcorned characters (machine-applied acct. number &/or Personal Identification Number) Popcorned = horizontal alignment of top/bottom of characters is not even.   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 9    RCSI / First Data Confidential


Final Execution Version

 

    Encoding: Out of Specs   The Mag stripe encoding on a personalized plastic is outside the specifications for encoded data as measured by a margin card or a Mag-Tek InSpec 9000 card reader. OR: Incomplete due to an invalid character in the acct. data stream. OR: Contains embossed acct. information on front, but no encoded information on mag stripe.   Relationship   Sev 1   Yes       Yes
    Form: Damaged/Defective  

Forms received from vendor are torn/damaged (including D Hole), have extraneous ink/faded ink, Registration off, Back of pre-printed form doesn’t match pre-printed front for Simplex Product (Print Class A & B). All COLOR Ink defects are ‘Form Defective’ Black Ink from vendor also ‘Form Defective’. But ALL Black Tonor issues are under ‘Form Poor Print Quality

Damaged during Production:

Dirty/Foreign matter (other than toner or vendor ink) that measures at least 1/4” in any direction. or totally obscures or causes the omission of any single

  Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 10    RCSI / First Data Confidential


Final Execution Version

 

       

character. (Oil Spots, dirt, belt marks, etc)

Torn: >/=  14” on edges or In body of form. OR Remit stub >1/2 torn from body of form. Wrinkle: Totally obscures or causes the omission of any single character, OR Any jagged wrinkle >3” measured from the 2 furthest points.

                   
    Form: Print Alignment Wrong  

Printed Toner not aligned per specifications for Clients’ form. (i.e. ‘H’ alignment, perf-mark alignment, skewing, etc.)

OR Printed on form upside down or backwards,

OR MICR/OCR issues caused by Print Alignment.

  Relationship   Sev 3       Yes   If requested
CARDS                           Page 5
Correct Personalization   Physical Product Appearance   Embossed/Ultragraphic characters, and Visual appearance & functionality of form/cards acceptable   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA

 

Exhibit B-2    B-2 - 11    RCSI / First Data Confidential


Final Execution Version

 

    Form: Poor Print Quality  

Toner missing or unused, or excessive. Toner totally obscures any single character, or omission of any single character.

OR Toner issues that cause Unscannable Barcodes (i.e. Formscan, MSAS, Zip-Code, or OMR Marks).

OR Any Toner marks that are clearly not part of the programmed printed form.

OR Using Wrong Toner- Print Class A & E should be Regular, Class B & F should be MICR.

  Relationship   Sev 3       Yes   If requested
    Form: Fold Wrong  

Fold is off Perforation OR Incorrect Nesting

OR using incorrect Fold style: Z, C for 11” forms, or Double Bi-fold vs Accordian Fold for 14”. OR fold is not aligned following unique client specifications. per special handling.

  Relationship   Sev 2       Yes   If exceeds threshold
    Form: Cut—Bottom / Top   Top/Bottom cuts that are not within tolerance per cut template if applicable. OR Missing or mutilated text in any direction OR >1/8” of another form attached per client specifications. OR Any   Relationship   Sev 2       Yes   If exceeds threshold

 

Exhibit B-2    B-2 - 12    RCSI / First Data Confidential


Final Execution Version

 

        cut that negatively impacts correct MICR/OCR alignment per templates where applicable.                    
   

Form: Cut -

Sides

  Side cuts that are not within tolerance per cut template if available. OR Missing or mutilated text in any direction OR >1/8” of another form attached. OR Any cut that negatively impacts correct MICR/OCR alignment per templates where applicable. OR Any cut preventing insertion of remit stub flatly into Remit/BRE.   Relationship   Sev 3       Yes   If requested
                             
Correct Postage   Postage Correct   Outer Mailing Envelope has correct and legible postage affixed as applicable   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Account/Mailpiece: Overweight   Account/mailpiece overweight: Possible extra materials pulled, or inserts pulled according to insert load instructions/System setup. (All but Print Mail Omaha currently WEIGHS every piece of mail during OQL inspections.) (mailpiece individual component   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 13    RCSI / First Data Confidential


Final Execution Version

 

        inspection is separate inspection outside of OQL for MPTQM MS5–Print/Mail)                    
    Metered: Undeclared Over Weight   System calls for lighter postage rate while actual weight requires more postage. (Can be found during MERLIN USPS inspections). OR: Postage MISSING.   Relationship   Sev 3       Yes   If requested
    Metered: Marking Unreadable   Application of an unreadable postage amount, meter #, city or date by the postage meter to a finished account/mailpiece due to light or smudged ink.   Relationship   Sev 3       Yes   If requested
    Metered: Mailing Date Wrong   wrong date metered on a finished account/mailpiece.   Relationship   Sev 3       Yes   If requested
CARDS                           Page 6
Correct Postage   Postage Correct   Outer Mailing Envelope has correct and legible postage affixed as applicable   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Metered: Postage Rate Wrong   Application of the incorrect postage or incorrect meter date to a finished account/mailpiece. OR: System calls for one postage rate while actual weight requires another.   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 14    RCSI / First Data Confidential


Final Execution Version

 

    Metered: Postage Marking Wrong   Failure to use proper slug in a postage meter per client instructions/ USPS requirements.   Relationship   Sev 3       Yes   If requested
                             
Correct Mail Method   Courier or Routing Path Correct   Accounts/Mailpieces are routed/mailed per processing requirements.   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Courier or Routing Path: Wrong (Wrong Address)  

Not placing 1st Class on table/conveyor for Zip Sort; Standard A on pallet for PSI; Foreign on pallet/ tray for Prod. Svcs.

OR Incorrect Mailing Label OR account/Mailpiece has Incorrect or Illegible address, billing sys/prin, or Option Mail # written on package.

OR FDR Internal Mail Routing method is/was unclear for next processing department.

OR Destination barcode sprayed on mailpiece is not for Delivery address.

OR Incorrect Placard on Pallet

  Compliance   Sev 1   Yes       Yes

 

Exhibit B-2    B-2 - 15    RCSI / First Data Confidential


Final Execution Version

 

        OR Incorrect Tray Tag on Presorted Mail. (Does NOT include Incorrect Separation/or Mixed setups)                    
    Courier or Routing Path: Wrong (All Other listed defects)  

Not placing 1st Class on table/conveyor for Zip Sort; Standard A on pallet for PSI; Foreign on pallet/ tray for Prod. Svcs.

OR Incorrect Mailing Label OR account/Mailpiece has Incorrect or Illegible address, billing sys/prin, or Option Mail # written on package.

OR FDR Internal Mail Routing method is/was unclear for next processing department.

OR Destination barcode sprayed on mailpiece is not for Delivery address.

OR Incorrect Placard on Pallet

OR Incorrect Tray Tag on Presorted Mail. (Does NOT include Incorrect Separation/or Mixed setups)

  Relationship   Sev 2       Yes   If exceeds threshold
                             

 

Exhibit B-2    B-2 - 16    RCSI / First Data Confidential


Final Execution Version

 

II. PRINT PRODUCTION SERVICES CTQ’S

The following chart describes the CTQs for the Print Production Services.

 

Print                           Page 1
Voice of Client   CTQ Name   Requirement Description   Impact Category                
Contents Secured   OME Seal Correct   Outer Mailing Envelop is properly sealed according to processing requirements   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    OME: Sealed Improperly   Envelope not completely sealed per requirements. Print/Mail: Sealed within 1 inch from both glue edges. OR if requirements are “to not seal”, it was sealed.   Compliance   Sev 1   Yes       Yes

 

Exhibit B-2    B-2 - 17    RCSI / First Data Confidential


Final Execution Version

 

    OME: Sticking   Account/mailpieces sticking together, OR outer mailing envelope sticking to contents.   Relationship   Sev 3       Yes   If requested
    OME/BRE Address Visible   Outer Mailing & Business Reply Envelope addresses are meeting USPS requirements   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    OME/BRE: Address/Barcode Not Visible or within USPS Clear Zone Specs  

USPS Tap Test Failure for Outer Mailing Envelope due to Incorrect positioning of Address(es) or Barcodes in window(s) Minimum 1/25th” vertical space when tap down (dime width) & Minimum 1/8th” horizontal space when tap left or right, between barcode and other printing, window or label edges.

* Complete Address not Visible— Masked: Insert, BRE flap, or Form corner folded in front of address.

OR Orientation: Inserted upside down, or backwards. OR Window alignment/programming incorrect.

  Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 18    RCSI / First Data Confidential


Final Execution Version

 

    All Pages/Cards Present   All form pages and cards are present for one and only one customer, including correct card quantity per BOM   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Form: Print Wrong Duplex   Backer ID Code on back of form does not match front code for Duplex product (Print Class E & F). Potential for two Customers-specific information to be on one physical page. I.e. the two Print engines were not matched prior to printing or after a crash.   Relationship   Sev 1   Yes       Yes
    Form: Double Stuff   More than one customers physical pages in one account/mailpiece. Relates to single and multipage products.   Compliance   Sev 1   Yes       Yes
    Form: Multipage Separation   Customers pages separated, not all contained in same account/mailpiece, or missing document.   Compliance   Sev 1   Yes       Yes
    Form: Duplicated   Production of two or more documents containing identical acct. information when only one was required.—Caught Internally or Mailed.   Relationship   Sev 3       Yes   If requested
Print                           Page 2

 

Exhibit B-2    B-2 - 19    RCSI / First Data Confidential


Final Execution Version

 

Correct BOM   Form Type Correct   Form Type used is correct per bill of materials   Relationship                
    Form: Wrong Form Type Used   Preprinted Vendor form type doesn’t match form type in Control Line per BOM(Bill of Materials)/ tracking system.   Relationship   Sev 1   Yes       Yes
    Inserts/BRE Correct   Inserts & BRE used are correct per bill of materials   Relationship                
    Insert/BRE: Wrong (Marketing Insert)   Placing an insert/BRE into an account/Mailpiece other than the one required by the BOM/bill of materials.   Relationship   Sev 3       Yes   If exceeds threshold
    Insert/BRE: Wrong (T&C,APR,Legal Insert)   Placing an insert/BRE into an account/Mailpiece other than the one required by the BOM/bill of materials.   Compliance   Sev 1   Yes       Yes
    Insert/BRE: Missing (Marketing Insert)   Failure to place an insert/BRE required by the bill of materials in the account/mailpiece   Relationship   Sev 3       Yes   If exceeds threshold
    Insert/BRE: Missing (T&C, APR, Legal Insert)   Failure to place an insert/BRE required by the bill of materials in the account/mailpiece   Compliance   Sev 1   Yes       Yes
    Insert/BRE: Multiple   More than one of the SAME insert /BRE in the account/mailpiece unless specified by BOM/Bill of Materials.   Relationship   Sev 3       Yes   If requested
    OME Correct   Outer Mailing Envelope used is correct per bill of materials   Relationship                

 

Exhibit B-2    B-2 - 20    RCSI / First Data Confidential


Final Execution Version

 

    OME: Wrong   Outer Mailing Envelope other than the one called for on Bill of Materials was used.   Relationship   Sev 2       Yes   If exceeds threshold
Correct Personalization   Physical Product Appearance   Visual appearance and functionality of form acceptable   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Form: Damaged/Defective  

Forms received from vendor are torn/damaged (including D Hole), have extraneous ink/faded ink, Registration off, Back of pre-printed form doesn’t match pre-printed front for Simplex Product (Print Class A & B). All COLOR Ink defects are ‘Form Defective’ Black Ink from vendor also ‘Form Defective’. But ALL Black Tonor issues are under ‘Form Poor Print Quality’

Damaged during Production: Dirty/Foreign matter (other than toner or vendor ink) that measures at least 1/4” in any direction. or totally obscures or causes the omission of any single character. (Oil Spots, dirt, belt marks, etc)

  Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 21    RCSI / First Data Confidential


Final Execution Version

 

        Torn: >/=  14” on edges or In body of form. OR Remit stub >1/2 torn from body of form. Wrinkle: Totally obscures or causes the omission of any single character, OR Any jagged wrinkle >3” measured from the 2 furthest points.                    
                             
Print                           Page 3
Correct Personalization   Physical Product Appearance   Visual appearance and functionality of form acceptable   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Form: Print Alignment Wrong  

Printed Toner not aligned per specifications for Clients’ form. (i.e. ‘H’ alignment, perf-mark alignment, skewing, etc.)

OR Printed on form upside down or backwards, OR MICR/OCR issues caused by Print Alignment.

  Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 22    RCSI / First Data Confidential


Final Execution Version

 

 

    Form: Poor Print Quality  

Toner missing or unused, or

excessive. Toner totally obscures any single character, or omission of any single character.

OR Toner issues that cause Unscannable Barcodes (i.e. Formscan, MSAS, Zip-Code, or OMR Marks).

OR Any Toner marks that are clearly not part of the programmed printed form.

OR Using Wrong Toner- Print Class A & E should be Regular, Class B & F should be MICR.

  Relationship   Sev 3       Yes   If requested
    Form: Fold Wrong  

Fold is off Perforation OR

Incorrect Nesting

OR using incorrect Fold style: Z, C for 11” forms, or Double Bi-fold vs Accordian Fold for 14”.

OR fold is not aligned following unique client specifications. per special handling.

  Relationship   Sev 2       Yes   If exceeds threshold
    Form: Cut—Bottom / Top   Top/Bottom cuts that are not within tolerance per cut template if applicable. OR Missing or mutilated text in any direction OR >1/8” of another form attached per client specifications. OR Any   Relationship   Sev 2       Yes   If exceeds threshold

 

Exhibit B-2    B-2 - 23    RCSI / First Data Confidential


Final Execution Version

 

        cut that negatively impacts correct MICR/OCR alignment per templates where applicable.                    
    Form: Cut—Sides   Side cuts that are not within tolerance per cut template if available. OR Missing or mutilated text in any direction OR >1/8” of another form attached. OR Any cut that negatively impacts correct MICR/OCR alignment per templates where applicable. OR Any cut preventing insertion of remit stub flatly into Remit/BRE.   Relationship   Sev 3       Yes   If requested
                             
Correct Postage   Postage Correct   Outer Mailing Envelope has correct and legible postage affixed as applicable   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Account/Mailpiece: Overweight   Account/mailpiece overweight: Possible extra materials pulled, or inserts pulled according to insert load instructions/System setup. (All but Print Mail Omaha currently WEIGHS every piece of mail during OQL inspections.) (mailpiece individual component   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 24    RCSI / First Data Confidential


Final Execution Version

 

        inspection is separate inspection outside of OQL for MPTQM MS5—Print/Mail)                    
    Metered: Undeclared Over Weight   System calls for lighter postage rate while actual weight requires more postage. (Can be found during MERLIN USPS inspections). OR: Postage MISSING.   Relationship   Sev 3       Yes   If requested
Print                           Page 4
Correct Postage   Postage Correct   Outer Mailing Envelope has correct and legible postage affixed as applicable   Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Metered: Marking Unreadable   Application of an unreadable postage amount, meter #, city or date by the postage meter to a finished account/mailpiece due to light or smudged ink.   Relationship   Sev 3       Yes   If requested
    Metered: Mailing Date Wrong   wrong date metered on a finished account/mailpiece.   Relationship   Sev 3       Yes   If requested
    Metered: Postage Rate Wrong   Application of the incorrect postage or incorrect meter date to a finished account/mailpiece. OR: System calls for one postage rate while actual weight requires another.   Relationship   Sev 3       Yes   If requested

 

Exhibit B-2    B-2 - 25    RCSI / First Data Confidential


Final Execution Version

 

    Metered: Postage Marking Wrong   Failure to use proper slug in a postage meter per client instructions/ USPS requirements.   Relationship   Sev 3       Yes   If requested
Correct Mail Method   Courier or Routing Path Correct   Accounts/Mailpieces are routed/mailed per processing requirements.   Compliance and Relationship                
    Defect Name   Definition of defect   Impact category   Category   Sev Alert   Email   RCA
    Courier or Routing Path: Wrong (Wrong Address)  

Not placing 1st Class on table/conveyor for Zip Sort; Standard A on pallet for PSI; Foreign on pallet/ tray for Prod. Svcs.

OR Incorrect Mailing Label OR account/Mailpiece has Incorrect or Illegible address, billing sys/prin, or Option Mail # written on package. OR FDR Internal Mail Routing method is/was unclear for next processing department.

OR Destination barcode sprayed on mailpiece is not for Delivery address.

OR Incorrect Placard on Pallet OR Incorrect Tray Tag on

  Compliance   Sev 1   Yes       Yes

 

Exhibit B-2    B-2 - 26    RCSI / First Data Confidential


Final Execution Version

 

        Presorted Mail. (Does NOT include Incorrect Separation/or Mixed setups)                    
   

Courier or Routing Path: Wrong (All Other listed

defects)

 

Not placing 1st Class on

table/conveyor for Zip Sort; Standard A on pallet for PSI; Foreign on pallet/ tray for Prod. Svcs.

OR Incorrect Mailing Label OR account/Mailpiece has Incorrect or Illegible address, billing sys/prin, or Option Mail # written on package. OR FDR Internal Mail Routing method is/was unclear for next processing department.

OR Destination barcode sprayed on mailpiece is not for Delivery address.

OR Incorrect Placard on Pallet

OR Incorrect Tray Tag on Presorted Mail. (Does NOT include Incorrect Separation/or Mixed setups)

  Relationship   Sev 2       Yes   If exceeds threshold

 

Exhibit B-2    B-2 - 27    RCSI / First Data Confidential


Final Execution Version

 

 

 

 

EXHIBIT B-3

INTENTIONALLY LEFT BLANK

 

Exhibit B-3    B-3 - 1    RCSI / First Data Confidential


Final Execution Version

EXHIBIT B-4

CUSTOMER BILLING GROUPINGS

RCSI Customer / Product Category Listing – For PSA Penalty Calculations – ***

 

RCSI Customer

  

Client ID /

System ID

  

Product

Category

  

Portfolio

Description

  

Billing PSA Party #

***   

5006 / 3941

5006 / 9369

  

Consumer

Consumer

  

Visa Dual Card

US PLCC

  

24021

23223

***   

5302 / 9079

Multi systems

   Consumer    Sales Finance – Multi Portfolios    20811
***   

5404 / 6210

5404 / 9112

5404 / 9273

  

Consumer

Consumer

BRC

  

Discover Dual Card

US PLCC

US BRC and Community

  

22481

20297

22341

***   

5433 / 1246

5433 / 9119

5433 / 9344

  

Consumer

Consumer

Consumer

  

MC Dual Card

US PLCC

Puerto Rico PLCC

  

22502

20704

23098

***    5484 / 9140    Consumer    US PLCC    20898
***    5484 / 9221    Consumer    US PLCC    20975
***   

5484 / 9222

8640 / 1320

  

Consumer

Consumer

  

US PLCC

Dual Card

  

21358

22446

***   

5484 / 9249

5956 /7591

  

Consumer

GECOM/PROX

  

US PLCC

Commercial

  

22016

24019

***   

5484 / 9254

5957 / 7595

  

Consumer

GECOM/PROX

  

US PLCC

Commercial

  

21970

24824

***    5484 / 9255    Consumer    US PLCC    21972
***   

5484 / 9263

8640 / 1192

  

Consumer

Consumer

  

US PLCC

Dual Card

  

22390

22506

***    5484 / 9266    Consumer    US PLCC    22369
***    5484 / 9267    Consumer    US PLCC    22515
***    5484 / 9270    Consumer    US PLCC and BRC mixed    22581
***   

5484 / 9275

8640 / 5160

  

Consumer

Consumer

  

US PLCC

Dual Card

  

22336

24051

***   

5484 / 9278

8640 / 1310

  

Consumer

Consumer

  

US PLCC

Dual Card

  

22313

21869

***    5484 / 9279    Consumer    US PLCC    22326
***    5484 / 9285    Consumer    US PLCC    22334
***    5484 / 9286    Consumer    US PLCC    22317
***    5484 / 9339    Consumer    US PLCC    22504
***   

5484 / 9341

8640 / 1313

  

Consumer

Consumer

  

US PLCC

Dual Card

  

22493

23314

 

 

Exhibit B-4   B-4 - 1   RCSI / First Data Confidential


Final Execution Version

 

***   

5484 / 9342

7828 / 7392

  

Consumer

GECOM/PROX

  

US PLCC

Commercial

  

22493

24061

***   

5484 / 9343

8640 / 1199

  

Consumer

Consumer

  

US PLCC

Dual Card

  

22501

22500

***   

5651 / 6330

5651 / 9336

  

Consumer

Consumer

  

AMEX Dual Card

US PLCC

  

23145

22519

***    6128 / 9356    Consumer    US PLCC    23067
***    6128 / 9357    Consumer    US PLCC    23639

GE Money

  

6496 / 1298

 

6496 / 1411

6496 / 1431

6496 / 3935

6496 / 9252

  

Consumer

 

Consumer

Consumer

Consumer

Consumer

  

Dual Card - Multi

Portfolios

Elfun

Pacific Capital

Hancock Bank

F1ex

  

23189

 

22463

23189

23189

21994

***   

6544 / 3179

6544 / 9143

  

Consumer

Consumer

  

Dual Card

US PLCC

  

23516

21949

***   

6544 / 3179

6544 / 9143

  

Consumer

Consumer

  

Dual Card

US PLCC

  

23516

21949

***   

6544 / 3179

6544 / 9143

  

Consumer

Consumer

  

Dual Card

US PLCC

  

23516

21949

***   

6709 / 6212

6709 / 9277

6709 / 6213

6709 / 9280

5966 / 7601

  

Consumer

Consumer

BRC

BRC

GECOM/PROX

  

Discover Dual Card

US PLCC

Discover Dual Card

US PLCC

Commercial

  

22542

22345

23446

22343

22525

***   

7009 / 4543

7009 / 9294

7009 / 9286

5879 / 7950

  

Consumer

Consumer

BRC

GECOM/PROX

  

Dual Card

US PLCC

US PLCC

Commercial

  

23623

22366

22366

24822

***    8640 / 1190    Consumer    Dual Card    22487
***    8640 / 1312    Consumer    Dual Card    23581
***    5958 / 7597    GECOM/PROX    Commercial    22546

Inactive

7001/9612

   ***    Consumer    US PLCC    22473

Inactive

7001/9332

   ***    Consumer    US PLCC    22473

Inactive

7001/9147

7001/9142

7001/9616

7001/9144

7001/9141

   ***    Consumer    US PLCC    22473

 

 

Exhibit B-4   B-4 - 2   RCSI / First Data Confidential


Final Execution Version

Schedule C

Charges

FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

by and between

RETAILER CREDIT SERVICES, INC.

and

FIRST DATA RESOURCES, LLC

Dated As Of

December 1, 2009

 

Schedule C    RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE C

CHARGES

 

1.

 

Introduction

     1   

2.

 

Statements and Letters and Embossing Charges

     1   

3.

 

Postage Charges

     2   

4.

 

***

     6   

5.

 

Minimum Commitment

     8   

6.

 

Volume Discount

     9   

7.

 

Price Increases Pursuant to Consumer Price Index Increases

     10   

8.

 

Product Composition Charges

     11   

9.

 

Miscellaneous Charges & Credits

     12   

10.

 

Termination Fees

     14   

 

 

Schedule C    C - i    RCSI / First Data Confidential


Final Execution Version

 

List of Exhibits

 

Exhibit C-1    Statements and Letter Services and Pricing
Exhibit C-2    Embossing Services and Pricing
Exhibit C-3    Pass-Through Expenses and Pricing
Exhibit C-4    Ancillary Services
Exhibit C-5    *** Examples
Exhibit C-6    [Intentionally Left Blank] s
Exhibit C-7    ***

 

 

Schedule C    C - ii    RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE C

CHARGES

 

1. Introduction.

This Schedule C describes the charges and methodology for calculating the charges with respect to the Production Services being provided to RCSI pursuant to this Agreement. The pricing elements and associated charges (and any adjustments thereto) set forth herein shall fully compensate First Data for providing the Production Services. The Production Services will be provided to RCSI pursuant to this Agreement without any fee or other charge which is in addition to the pricing elements and associated charges specified in this Schedule C. Notwithstanding that certain pricing elements may be overlapping in their descriptions of various elements of the Production Services, First Data may not charge RCSI more than once for any unique service, function or feature (or any element thereof).

All capitalized terms used and not defined in this Schedule C shall have the meanings given them in this Agreement or in the other Exhibits or Schedules to this Agreement.

 

2. Statements and Letters and Embossing Charges.

2.1 Introduction.

The charges provided in Exhibits C-1, C-2 and C-4, Sections 2.2, 3, and 9 provide an exclusive list (except for New Production Services) of print and mail services for Statements and Letters and embossing services for Transaction Cards and the associated charges therefore that RCSI may elect to obtain from First Data during the Term. If RCSI requests Production Services (other than New Production Services) that are not expressly set forth in Schedule C-1, C-2, or C-4, and are not otherwise identified in this Schedule C as having a separate associated fee, such Production Services shall be deemed to be included in the Production Services described in Schedule A.

2.2 Calculation of Print Ratios.

(a) The charges in Exhibit C-1 are determined based upon the printing volume assumption that RCSI will require printing as part of the Production Services performed by First Data with a Printing Ratio of ***. The Printing Ratio shall be adjusted by mutual agreement of the Parties by the Effective Date to reflect anticipated changes in RCSI’s usage resulting from the adoption of printing onserts in lieu of inserts.

(b) To determine the pages printed per Statement and Letter mailed (the “Printing Ratio”), First Data shall calculate the usage pursuant to a fraction, the numerator of which is the total number of Statement and Letter pages printed and the denominator of which is the total number of Statements and Letters produced.

(c) First Data shall perform separate calculations as provided in Section 2.2(b) above for (i) RCSI volumes printed with forms and (ii) for RCSI volumes without forms.

 

 

Schedule C    C - 1    RCSI / First Data Confidential


Final Execution Version

 

(d) If the actual Printing Ratio calculated at the end of a Production Year is above or below the Printing Ratio, then First Data shall charge RCSI a charge or provide RCSI a credit (as the case may be) that is calculated by:

(i) (actual Printing Ratio - Printing Ratio) x (***) x (total # Statements and Letters produced and mailed with forms); and

(ii) (actual Printing Ratio - Printing Ratio) x (***) x (total # Statements and Letters produced and mailed without forms).

For example, if in Production Year 2 the actual Printing Ratio was *** pages per Statement or Letter mailed for RCSI volumes printed with forms, then there shall be *** charged to RCSI for printing usage for that period. Additionally, First Data would provide a credit to RCSI of *** x *** x the number of Statements and Letters mailed for RCSI volumes printed with forms.

(e) Although the foregoing calculation is to be made on a Production Year basis against RCSI’s volumes in the aggregate, for reporting purposes First Data shall provide such calculations to RCSI quarterly on a pro-forma basis broken down by portfolios as instructed by RCSI.

 

3. Postage Charges.

3.1 First Data to act as RCSI’s Agent for Mailing. First Data agrees to act as an agent of RCSI and its Affiliates for the purchase on behalf of RCSI’s and its Affiliates’ behalf of postage required to mail materials (including Statements, Letters, and Transaction Card Packages).

3.2 First Ounce From June 1, 2009 to November 30, 2009. From June 1, 2009 through and including November 30, 2009 RCSI shall be charged for postage for the first ounce of each first-class mail piece at the *** rate of ***. At the end of such period (but no later than December 15, 2009) the total of First Data’s actual postage cost for RCSI on a Postage Pass-Through Expense Basis for such period shall be calculated and reported to RCSI. ***

3.3 First Ounce From Effective Date and thereafter.

(a) Thereafter (e.g., beginning December 1, 2009), during each month during the Term of this Agreement (and in which RCSI’s average daily mail volumes (i.e., the total number of mail pieces divided by the number of mailing days) during such month are at least *** pieces of mail) RCSI shall be charged for postage for the first ounce of each first-class mail piece *** (x) *** and (y):

(i) ***; and

(ii) ***.

(b) If RCSI’s *** .

 

 

Schedule C    C - 2    RCSI / First Data Confidential


Final Execution Version

 

3.4 Charge for Mail Above One Ounce

(a) For first-class mail weighing more than one (1) ounce but not greater than 3.5 ounces, RCSI shall pay an additional:

(i) Second ounce rate: *** for the second ounce of each first-class mail piece (For example ***)

(ii) Third ounce rate: *** for the third ounce of each first-class mail piece (For example ***)

(b) For each RCSI mail piece which is greater than 3.5 ounces, *** shall apply, for example, as of August 8, 2009 a 3.6 ounce RCSI mail piece would be ***.

(c) If the USPS increases or decreases postage rates for first-class mail weighing more than one ounce, the amounts shown in this Section 3.4 are subject to adjustment in the amount of any change in the USPS rates for additional ounces.

3.5 The Postage Conditions are:

(a) RCSI’s upgradeable mail does not exceed *** percent of all RCSI mail during such month;

(b) RCSI does not have more than *** physical Form Types for Statements in such month; and

(c) First Data has on average daily mail volumes during such month (i.e., the total number of mail pieces divided by the number of mailing days) of at least *** pieces of mail (excluding RCSI’s volume).

3.6 Invoicing and Payment. First Data shall invoice RCSI daily for postage at the applicable rates provided above and RCSI shall pay First Data the sum of the applicable invoices ***.

3.7 Intelligent Mail Barcode.

Additionally, First Data will pass through to RCSI the actual USPS Intelligent Mail Barcode (IMB) related discount when that discount goes into effect and is received by First Data (or if First Data failed to qualify and remain a full service IMB mailer (a) for reasons other than changes to the IMB program by the USPS or (b) due to the failure of RCSI to perform its obligations, the amount that would have been received had it done so).

3.8 Calculation of Postage Rate Pass Thru Expense Basis.

(a) This Section 3.8 describes how postage charges calculated on a Postage Pass-Through Expenses Basis is determined.

(b) For each discount category which is offered by the USPS in connection with applicable types of mailings and utilized by First Data on behalf of its customers during the month (the “Discount Category”), First Data shall calculate a

 

 

Schedule C    C - 3    RCSI / First Data Confidential


Final Execution Version

 

monthly ratio (expressed as a percentage) based upon, and for use with all applicable First Data customers, in which the numerator is the total number of items mailed that qualified for the applicable Discount Category, and the denominator is the total number of items mailed (the “Qualifying Percentage”);

(c) In order to determine the volume of items mailed by First Data for RCSI during the month which are entitled to a discount under each Discount Category, the Qualifying Percentage for each Discount Category shall then be multiplied by the total number of items mailed by First Data for RCSI during the month (the “RCSI Discount Volume”); and

(d) For each Discount Category, the RCSI Discount Volume shall then be multiplied by the then current discount associated with such Discount Category (the “Category Amount”), and the total charge to RCSI for the month will be the sum of the Category Amounts for the month.

3.9 Charges for Special Mail Categories.

(a) United States Standard A Mailings. With respect to Standard A mailings, First Data agrees to act as an agent on behalf of RCSI and RCSI shall reimburse First Data in accordance with First Data’s then current Pass-Through Expense basis methodology for the purchase on RCSI’s behalf of the Standard A postage (including third party expenses related thereto on a Pass-Through Expense basis) required to mail any materials which are mailed by First Data on behalf of RCSI.

(b) International Mailings. With respect to international mailings, First Data agrees to act as an agent on behalf of RCSI and RCSI shall reimburse First Data in accordance with First Data’s then current Pass-Through Expenses basis methodology for the purchase on RCSI’s behalf of the postage (including third party expenses related thereto on a Pass-Through Expenses basis) required to mail any materials which are mailed by First Data on behalf of RCSI.

3.10 Postage Rate Adjustment.

This Section 3.10 describes how the Tier 1 and Tier 2 Postage Rates are to be adjusted if after the Execution Date the USPS changes postage rates, discounts, or the categories or structures of the rates or discounts. In such case:

(a) If the only change is a change in rates and/or discounts and not in any other regulations or requirements that affect postage rates, each of the Tier 1 and Tier 2 Postage Rates shall be increased or decreased by substituting the new USPS rate and applicable discount in Columns B and C below and recalculating columns D and F accordingly (to four digits to the right of the decimal point for the Tier 1 Postage Rates and to five digits to the right of the decimal point for the Tier 2 Postage Rates) using the value shown in % Discount Category Represents (which value is firm and fixed and shall not change) (Column E), and then arriving at a new total. By way of example, if the only change is that the Discount (Column C) for 3-Digit mail is changed to *** then the net rate for 3-Digit becomes ***, the imputed Tier 1 rate becomes ***, the imputed Tier 2 rate becomes ***, decreasing the Tier 1 Postage Rate to *** and the Tier 2 Postage Rate to ***.

 

 

Schedule C    C - 4    RCSI / First Data Confidential


Final Execution Version

 

Tier 1 Postage Rates

A

   B      C    D    E     F

USPS Discount Category

   USPS
1 oz
rate
     Discount    Net
Rate
   % Discount
Category
Represents
    Imputed
Rate

5-Digit

     0.44       ***    ***      ***      ***

3-Digit

     0.44       ***    ***      ***      ***

AADC

     0.44       ***    ***      ***      ***

MAADC

     0.44       ***    ***      ***      ***

Non Auto

     0.44       ***    ***      ***      ***

Full Rate

     0.44       ***    ***      ***      ***

VA Plastic

     0.44       ***    ***      ***      ***
              100.00  

Tier 1 Postage Rate

     ***

 

Tier 2 Postage Rates

A

   B      C    D    E     F

USPS Discount Category

   USPS
1 oz
rate
     Discount    Net
Rate
   % Discount
Category
Represents
    Imputed
Rate

5-Digit

     0.44       ***    ***      ***      ***

3-Digit

     0.44       ***    ***      ***      ***

AADC

     0.44       ***    ***      ***      ***

MAADC

     0.44       ***    ***      ***      ***

Non Auto

     0.44       ***    ***      ***      ***

Full Rate

     0.44       ***    ***      ***      ***

VA Plastic

     0.44       ***    ***      ***      ***
              100.00  

Tier 2 Postage Rate

     ***

Columns B, C, and D are all as of the Execution Date

(b) If the change is a change other than a change described in Section above 3.10(a), then the Parties shall equitably adjust the foregoing calculation with the view of accomplishing the foregoing as nearly as possible given the other changes made by the USPS.

3.11 RCSI Right To Use Third Parties For Mailings.

The postage and pre-sort services provided in this Agreement are non-exclusive. In accordance with Section 3.4(a) of this Agreement and Section 3.1(c) of the TSA RCSI may perform such services for itself or have third parties perform such services on its behalf; provided, however, that if RCSI so elects to perform such postage and pre-sort services itself or to have them performed by a third party, RCSI shall be subject to a separate and additional charge. As a result of RCSI utilizing a third party vendor for such Postage and Pre-sort mail services, RCSI and First Data

 

 

Schedule C    C - 5    RCSI / First Data Confidential


Final Execution Version

 

will mutually agree to a *** charge *** that will cover the expense increases that First Data incurs for such services to RCSI as it relates to separating, packaging the mail and making ready for pickup by a third party vendor. If RCSI desires to elect such option RCSI shall give First Data at least six (6) months advance notice in order that First Data may have sufficient time to prepare to perform such separation, packaging and delivery services.

3.12 Conditions to Discounts.

(a) RCSI agrees to complete, execute and provide to First Data a copy of USPS Form 6014, Certificate of Move Update Compliance, or its then current equivalent, within a reasonable time following the Execution Date, annually thereafter, and whenever under the applicable USPS regulations a change of circumstances requires that RCSI provide a replacement. If at any time RCSI is not in compliance with USPS requirements related to first-class presorted, automated rates or other discounts (including but not limited to, the Move Update requirements) (i) to the extent applicable based on the postal regulations RCSI will pay for postage at the full USPS postage rate without USPS discounts and (ii) if First Data incurs additional charges, penalties, expenses, or other amounts in connection with such non-compliance RCSI shall reimburse First Data therefore. First Data shall promptly notify RCSI’s Vice President of Portfolio Service Operations if First Data becomes aware of information that would reasonably indicate that RCSI is not in compliance with such requirements.

(b) Notwithstanding the provisions of Section 16.3 (Force Majeure) of the Agreement (including the last sentence of Section 16.3(c)) if a force majeure event interferes with First Data’s ability to provide ***, First Data may *** during the first sixty (60) days after the occurrence of the force majeure event provided that the *** to RCSI therefore with regard to such sixty (60) day period shall not exceed ***, which shall be prorated if the duration of the impact of the force majeure event is less than sixty (60) days (i.e., if the impact period is thirty (30) days the limitation amount shall be ***.

 

4. ***

[The following five pages were omitted pursuant to the confidential treatment request.]

 

 

Schedule C    C - 6    RCSI / First Data Confidential


Final Execution Version

 

5. Minimum Commitment.

5.1 RCSI agrees to purchase minimum Production Services from First Data during the Term as follows:

(a) During Production Year 1, *** of GE Consumer Finance’s demand for the Production Services.

(b) During Production ***:

(i) *** of GE Consumer Finance’s demand for the Production Services *** and

(ii) *** of the volume of Production Services purchased from First Data in the prior Production Year (measured by charges, normalized for reductions from year to year for ***).

(c) During Production Years 4 and 5 *** of the volume of Production Services purchased from First Data in the prior Production Year (measured by charges, normalized for reductions from year to year for ***).

(d) ***, there shall be *** minimum commitment.

5.2 The foregoing obligations will not apply:

(a) after the date that either Party has given the other notice of termination;

 

 

Schedule C    C - 8    RCSI / First Data Confidential


Final Execution Version

 

(b) with respect to the *** requirement with regard to demand for Production Services that is converted to new technologies (such as e-bill) or cancellation/transfers of portfolios to non-Affiliates of RCSI; and

(c) as provided in Section 4.6(b)(ii)(A)(2)(b) and 4.6(b)(ii)(B) of Schedule B.

 

6. Volume Discount.

6.1 Under Section 11.7(b) of the Original Agreement RCSI was entitled to discounts against the charges for Basic Production Services for Statements and Letters and Embossing as certain thresholds were reached. The charges provided in Exhibit C-1 already reflect the impact of such discounts for thresholds reached as of the Execution Date.

6.2 If after the date of execution of this Agreement (even if before the Effective Date) RCSI’s volumes reach a new Volume Discount Level in Table 6A or Table 6B, as appropriate, RCSI shall be entitled to such additional discount. Volumes shall be measured over a rolling *** month period. Once earned discounts shall be effective as of and from the first day of the following month for the remainder of the Term.

Table 6A – Volume of Statements and Letters

(As of June 1, 2009 RCSI has earned discounts at the 281,686,125 volume level)

 

Volume Discount Level ***

   *** Discount

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

Table 6B – Volume of Transaction Cards Embossed

(As of June 1, 2009 RCSI has earned discounts at the 16,675,750 volume level)

 

Volume Discount Level ***

   *** Discount

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

***

   ***

 

 

Schedule C    C - 9    RCSI / First Data Confidential


Final Execution Version

 

6.3 Each individual volume threshold identified in Section 6.2 shall be referred to individually herein as a “Volume Discount Level” and, collectively, as the “Volume Discount Levels”. Each percentage decrease in the prices for the identified Basic Production Services shall be referred to individually herein as a “Percentage Discount” and collectively, as the “Percentage Discounts”.

6.4 Percentage Discounts shall be *** such that the price of the Basic Production Services to which each Percentage Discount shall apply shall already reflect all Percentage Discounts which have already been applied.

6.5 For purposes of determining whether the Volume Discount Levels for Statements and Letters produced during a year of the Term have been reached, all Statements and Letters produced (in whole or in part) by First Data or First Data Affiliates for RCSI under this Agreement during such year, all Statements and Letters produced (in whole or in part) by First Data or First Data Affiliates at any location for RCSI (or its successors or assigns) under the TSA shall be aggregated and counted. For purposes of determining whether the Volume Discount Levels for Transaction Cards embossed during a year of the Term have been reached, all Transaction Cards embossed (in whole or in part) by First Data or First Data Affiliates for RCSI under this Agreement during such year and Transaction Cards embossed (in whole or in part) by First Data or First Data Affiliates at any location for RCSI (or its successors or assigns) under the Technology Sourcing Agreement shall be aggregated and counted. For purposes of calculating the volumes of Transaction Cards embossed for RCSI pursuant to this Section 6, First Data shall aggregate and count all Transaction Cards embossed for RCSI, including for Accounts obtained by RCSI or RCSI Affiliates through acquisition, purchase, RCSI Customer increases, evolution of RCSI Customer requirements, evolution of RCSI and RCSI Affiliate service or product offerings and by any other means.

6.6 If the volume of Statements and Letters produced or Transaction Cards embossed increases to or past more than *** Volume Discount Level within a calendar year, the Percentage Discount corresponding to each such Volume Discount Level shall nonetheless be applied.

6.7 RCSI will provide First Data with non-binding quarterly forecast information regarding anticipated Statement, Letter and embossing volume.

 

7. Price Increases Pursuant to Consumer Price Index Increases.

If (a) the Consumer Price Index for all Urban Consumers, U.S. City Average, for All Items (1982- 1984 = 100), as published by the Bureau of Labor Statistics of the U.S. Department of Labor (“CPI-U”) increases (such increase, the “CPI-U Increase”) by more than *** in any calendar year, and (b) such CPI-U Increase results in an increase

 

 

Schedule C    C - 10    RCSI / First Data Confidential


Final Execution Version

 

of more than *** in the unit cost related to the Production Services (such increase, the “Unit Cost Increase”) in such calendar year (as reasonably verified by First Data), the charges under this Agreement for the Production Services for the following calendar year shall be adjusted by a percentage amount thereof equal to the portion of the Unit Cost Increase which is in excess of *** As an example, if the CPI-U Increase published in the month of December for calendar year 2000 is *** and it causes a Unit Cost Increase of ***, the Parties will increase the charges hereunder for such Production Services effective January 1, 2001 by *** of the prices in calendar year 2000. If the Bureau of Labor Statistics redefines the base year or index composition or discontinues publishing such index, the Parties shall either equitably adjust their calculations by using a reasonable conversion formula or select an alternative and comparable index published by a mutually agreeable source, as applicable.

 

8. Product Composition Charges

8.1 Definitions

Product Composition for Statements and Letters” means the mix of commercial and consumer Statements and Letters products and the component makeup thereof (including CommericaLine, Business Revolving Charge and consumer products, any paper weight ranging from 17.5 to 24 pound paper, hand assembly and mechanical assembly insertions, rush courier expenses, insert per mailing set-ups (but not the number of inserts), zip sort, reports per page and number of Form Types per RCSI Customer) provided by First Data under this Agreement. RCSI Volume increases or decreases, Cycle Schedules, and fourteen (14) inch forms for the *** Portfolio shall not be considered Product Composition for Statements and Letters.

8.2 Until such time as the Parties agree on the *** and associated specifications for a particular category or categories (envelopes, cut sheet forms, and D hole card carriers) otherwise included in Product Composition for Statements and Letters (at which point Sections 9.4 and 9.7 shall apply to such category or categories), if :

***

8.3 First Data shall notify RCSI as soon as it is apparent that such an increase may have occurred and bill RCSI provisionally, with a credit after twelve (12) months if in fact the extra charges were not due. The baseline used to calculate the *** Product Composition for Statements and Letters calculation described in Section 8.2 will continue as provided in, and calculated under, the Original Agreement and shall be normalized for changes in new lower weight paper being considered by the Parties.

 

 

Schedule C    C - 11    RCSI / First Data Confidential


Final Execution Version

 

9. Miscellaneous Charges & Credits.

9.1 2 Day SLA Surcharge. From August 20, 2009 until the date when all of the Production Services are converted to SCS (or would have been converted to SCS except for First Data’s failure to meet its obligations) (which is anticipated to be by the end of February, 2010), RCSI shall be charged an additional *** per Statement. This is item #7828 in Exhibit C-4.

9.2 Accounting Credit. Each month during the Term RCSI shall receive a *** credit which shall offset other charges. This credit will be provided to RCSI on the monthly invoice.

9.3 Reruns or Reprints. If a Rerun or Reprint is required due to the fault of First Data (except if the fault is primarily due to First Data’s performance under the TSA and RCSI is compensated for the Rerun or Reprint under the TSA), there shall be no additional charge to RCSI (including additional charges for postage) hereunder as a result thereof and First Data shall reimburse RCSI for all additional *** incurred by RCSI as a result of such fault.

9.4 Custom Form Orders. RCSI will pay First Data on an order–by-order basis (and on a Pass-Through Expense Basis) the amount, if any, by which the cost to First Data of an order of Custom Forms exceeds the Imputed Cost of the applicable category of Custom Forms. “Custom Forms” means (a) continuous roll paper (other than paper which (x) is 17.5 to 24lb white laser bond MOCR, (y) is not converted, and (z) is not preprinted) or (b) certain types of envelopes (outer mail and return), cut sheet forms and D hole card carriers, the specifications of which in each case will be mutually agreed by the Parties along with the associated Imputed Cost.

9.5 Form Type pricing impact above the *** physical Form Types.

If the number of Statement Form Types in use by RCSI in any month exceeds *** Form Types the charge for all Statements will increase as follows:

(a) For incremental Form Types from ***, charge for the addition of the *** form *** with an increase for every additional form of ***. For example form *** would be *** plus *** *** X 9) for a total of *** per form if there are *** forms, plus

(b) For incremental Form Types from ***, charge for the addition of the *** form *** with an increase for every additional form of ***. For example form *** would be *** plus *** *** X 4) for a total of *** per form if there are *** forms, plus

(c) For incremental forms *** charge for the addition of the *** form *** with an increase for every additional form of ***.

RCSI shall not be entitled to more than *** Statement Form Types unless the applicable charge shall be agreed upon by the Parties. For every additional portfolio added after the Effective Date RCSI shall be entitled to *** additional Form Type and the charges above shall be appropriately adjusted.

 

 

Schedule C    C - 12    RCSI / First Data Confidential


Final Execution Version

 

9.6 Programming Services. The charges for all programming services charged to RCSI in connection with the Production Services shall be as provided in Schedule C, Section 11.3 of the TSA.

9.7 *** Purchase of Paper.

(a) The following provisions shall apply to paper and envelopes (each referred to herein as a “Consumable Category”), each being treated separately and independently. RCSI may elect different options from time to time for each Consumable Category.

(b) ***

 

Consumable Category

  

Impacted Billing Element Number

  

***

  

***

24 lb white Laser MOCR Bond Paper, continuous roll, not converted not preprinted    Included in 7814    ***    ***
20 lb white Laser MOCR Bond Paper, continuous roll, not converted not preprinted    Included in 7814    ***    ***
Envelopes - Outer    Included in 7814    ***    ***
Envelopes - Remit    Included in 7814    ***    ***
Cut Sheet Forms (Pep/Letters)    Included in 7471, 7801, 7813, 9951    ***    ***
D Hole Card Carriers    Included in 7473    ***    ***

* 6 15/16th x 14” finished sheet

***

(c) ***

[The following two pages were omitted pursuant to the confidential treatment request]

 

 

Schedule C    C - 13    RCSI / First Data Confidential


Final Execution Version

 

]

 

10. Termination Fees.

10.1 If the Agreement is terminated by RCSI pursuant to Section 18.1 of the Agreement (“Termination for Cause”), then First Data shall provide all activities required of First Data to provide Termination/Expiration Assistance without additional charge.

 

 

Schedule C    C - 14    RCSI / First Data Confidential


Final Execution Version

 

10.2 If the Agreement is terminated by RCSI pursuant to Section 18.3 of the Agreement (“Termination for Convenience”), *** termination charge shall be payable.

 

 

Schedule C    C - 15    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT C - 1

STATEMENTS AND LETTERS CHARGES

Basic Statement and Letter pricing in Table C-1.A includes the Production Services described in Section 3.1 of Schedule A.

TABLE C-1.A

 

Bundled Statement and Letter Print Service

Element

  

Description

   Price as
of
Execution
Date
   12/1/2009
Price
   TSA / PSA    Active /
Inactive

0601/7471*

With Forms

  

Basic Bundled Statement and Letter Print Service

(Per Statement/Letter)

   ***    ***    PSA    Active

0601/7471*

Without Forms

  

Basic Bundled Statement and Letter Print Service

(Per Statement/Letter)

   ***    ***    PSA    Active

7814* (Note 1)

With Forms

  

Basic Bundled SCS Statement and Letter Service

(24 lb. bond (white), duplex, color)

6 15/16 by 14 inch

   ***    ***    PSA    Active

7814* (Note 1)

Without Forms

  

Basic Bundled SCS Statement and Letter Service

(duplex, color)

   ***    ***    PSA    Active
7198/7200 With Forms   

Additional Statement/Letter Page

(pricing used for IPR calculation)

   ***    ***    PSA    Active
7198/7200 Without Forms   

Additional Statement/Letter Page

(pricing used for IPR calculation)

   ***    ***    PSA    Active

***

Note 1 – For portfolios that are migrating to SCS Services prior to 12/1/09, the 12/1/09 price will be in effect. For the *** and Sales Finance portfolios which as of the Execution Date have already migrated to SCS 12/1/09 pricing becomes effective 12/1/09. This applies to elements 4720 CORRESPONDENCE DIRECTOR, element 7814 PRINT 14 IN DUPLEX – PAGE 1 CONT, and element 4705 COLOR DUPLEX BLACK ON BACK 14IN

(a) On a monthly basis, RCSI or RCSI Customers will provide to First Data *** of all promotional envelopes ***. For example, if monthly RCSI volumes equal *** Statements, RCSI or RCSI Customers will provide up to a maximum of *** envelopes. If RCSI provides less than *** of monthly envelope volume, First Data will provide the difference of envelopes on behalf of RCSI at ***. Such *** will appear on the next invoice following such month

 

 

Schedule C    C - 16    RCSI / First Data Confidential


Final Execution Version

 

(b) If during any month, RCSI or RCSI Customers provides more than *** of all promotional envelopes, First Data shall provide RCSI a credit of *** per envelope for each envelope provided above *** on the next invoice following such month. Conversely, if during any month, RCSI or RCSI Customers provide *** of all promotional envelopes, First Data shall provide a credit for that month, on the next invoice following such month, as reflected in the schedule below corresponding with the applicable range of monthly envelope volume.

 

% of Promotional Envelopes Provided by RCSI on a Monthly basis

  

Corresponding Monthly Credit

***    ***
***    ***
***    ***
***    ***
***    ***
***    ***

For illustration purposes, the examples set forth below reflect RCSI’s eligibility for monthly credits based on selected promotional envelope volumes:

 

    If RCSI were to provide thirty-eight and one-half percent (38.5%) of envelopes for a given month, RCSI would receive a credit for that month in the amount of ***.

 

    If RCSI were to provide fifty percent (50.0%) of envelopes for a given month, RCSI would receive a credit for’ that month in the amount of *** for each envelope provided above ***.

 

    If RCSI were to provide twenty-five percent (25.0%) of envelopes for a given month, RCSI would receive a credit for that month in the amount ***. In addition, First Data will provide *** of the envelopes at ***. Such cost and fee will appear on the next invoice following such month.

For the purposes of reference only, below is a schedule of First Data’s cost of certain envelope types as of the date in the schedule below. For the avoidance of doubt, including this price information in this Amendment is not a commitment to RCSI of future price nor is it a projection of future price by any means whatsoever. In addition, First Data is not guaranteeing RCSI any specific price for the following envelope types or any envelope type for that matter. The below prices exclude the ***. The below prices are based on historical volumes and are subject to change.

 

Envelope Type

  

Envelope Description

  

Price per 1,000
Envelopes (as of
11/01/07)

5206   

4” x 7 3/16”, 20# WW, open

window  34” x 3 1/8”, 1/1 flexo.

   ***
5233   

4” x 7 3/16”, 20# WW, open

window 1 1/4” x 3 1/2”, 1/1 flexo.

   ***
5250   

4” x 7 3/16”, 20# WW, open

window 1 1/4” x 3 1/2”, 1/1 flexo.

   ***

 

 

Schedule C    C - 17    RCSI / First Data Confidential


Final Execution Version

 

5251   

4” x 7 3/16”, 20# WW, open

window 1 1/4” x 3 1/2”, 1/1 flexo.

   ***
5252   

4” x 7 3/16”, 20# WW, open

window 1 1/8” x 3 1/2”, 1/1 flexo.

   ***
5253   

4” x 7 3/16”, 20# WW, open

window 1 1/8” x 3 1/2”, 1/1 flexo.

   ***
5254   

4” x 7 3/16”, 20# WW, open

window 1 1/4” x 3 1/2”, 1/1 flexo.

   ***
5255   

4” x 7 3/16”, 20# WW, open

window 1 1/4” x 3 1/2”, 2/1 flexo.

   ***

 

 

Schedule C    C - 18    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT C - 2

EMBOSSING SERVICES AND PRICING

Basic embossing pricing includes the Production Services described in Section 4.1 of Schedule A.

 

Bundled Embossing Service

Element

  

Description

   Price as
of
Execution
Date
   12/1/2009
Price
   TSA / PSA    Active /
Inactive

7473*

With Forms

   Basic Embossing Services (Per card embossed)    ***    ***    PSA    Active

7473*

Without Forms

   Basic Embossing Services (Per card embossed)    ***    ***    PSA    Active
7651   

Embossing Services for Mass Reissues without forms

(Each mass reissue shall include no fewer than ***

   ***    ***    PSA    Active

 

* Elements qualify for both *** provided in Section 4.1 and ***.

The forms (i.e., card carriers, envelopes, etc.) associated with element 7651 for mass re-issues will be supplied at ***. The pricing set forth above is subject to First Data having the capacity necessary to undertake mass re-issuing requests by RCSI. Prior to putting any card mass re-issue out for bid, RCSI will provide First Data notice of its intent to bid such mass re-issue, following which First Data will inform RCSI within *** following such notice of any capacity limitations with regard to its ability to provide the Production Services necessary for such mass re-issue.

 

 

Schedule C    C - 19    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT C - 3

PASS-THROUGH EXPENSES

The following items are the exclusive list of Pass-Through Expenses:

 

1. Pass through elements identified in Exhibit C-4(b).

 

2. Plastics which have been purchased on behalf of RCSI.

 

3. Courier expenses associated with the transportation of production related documents from First Data to RCSI; provided, however, that courier expenses associated with the transportation of production related documents from RCSI to First Data and First Data to First Data shall not be considered a Pass-Through Expense.

 

4. Postage as provided in Section 3.

 

5. Forms (a) *** as provided in Section 9.7 and (b) Custom Forms as provided in Section 9.4.

 

 

Schedule C    C - 20    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT C - 4

ANCILLARY PRODUCTION SERVICES

The pricing set forth in this Exhibit C-4 is for the performance of the listed services at First Data-operated facilities as determined by First Data in accordance with the Agreement.

 

(a) Ancillary Services

 

Element

  

Name

  

Description

  

Price as

of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

0577    PLASTICARD CONTACTLESS CHIP PERSONALIZATION       ***    ***    PSA    Active
0622    REMITTANCE ENVELOPES       Various    Various    PSA    Active
2307    START-UP FEE    Per hour    ***    ***    PSA    Active
2721    URGENCY LETTER REQUESTS    *** Letter    ***    ***    PSA    Active
3541    APPLICATION TRANSACTION COUNTER       ***    ***    PSA    Active
4301    CUSTOM FORM SURCHARGE    ***    Various    Various    PSA    Active
4303    FORMS CHARGES       Various    Various    PSA    Active
4306    FDR CONTRACTUAL CREDITS/DEBITS       Various    Various    TSA/PSA    Active
4339    WAREHOUSE REWORK HANDLING FEE    First Data Rework    ***    ***    PSA    Active
4423    STATEMENTS - PAPER REBILL    Used for IPR    Various    Various    PSA    Active
4427    STANDARD A MAIL PREP    ***    ***    ***    PSA    Active
4701    COLOR SIMPLEX 11 IN    ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
4702    COLOR SIMPLEX 14 IN    ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      

 

 

Schedule C    C - 21    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
4704    COLOR DUPLEX BLACK ON BACK 11 IN    ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
4705   

COLOR DUPLEX BLACK ON BACK 14 IN

(Note 1)

   ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
4707    COLOR/ADDITIONAL SETUP CHARGE    ***    ***    ***    PSA    Active
4713    PAPER QUALITY 3    Applicability of this element after 12/01/09 still being discussed    ***    ***    PSA    Active
4715    NEW COLOR BACKER/MSSG PAGE/DOC OVERLAY       ***    ***    PSA    Active
4716    NEW COLOR CHECK/COUPON/AD MSSG OVERLAY       ***    ***    PSA    Active
4717    NEW COLOR LOGO/SIGNATURE       ***    ***    PSA    Active
4720    CORRESPONDENCE DIRECTOR (Note1)       ***    ***    PSA    Active
4721    DQ LETTER PRODUCTION *    Bundled to 7825    ***    ***    PSA    Active
4722    DQ ENHANCED DECISIONING *    Bundled to 7825    ***    ***    PSA    Active
4723    DQ ELECTRONIC DOCUMENT DELIVERY (EDD) *    Bundled to 7825    ***    ***    PSA    Active
4724    DQ STATEMENT PRODUCTION *    Bundled to 7825    ***    ***    PSA    Active
4725    CRF FOR SCS SEGMENTS    Bundled to 7825    ***    ***    PSA    Active
4726    ELECTRONIC WEB PRESENTMENT (Statement) Note 3    Retro to 1/1/2009    ***    ***    PSA    Active

 

 

Schedule C    C - 22    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

4730    ELECTRONIC NOTICES/ALERTS Note 3    Bundled to 4726    ***    ***    PSA    Active
4732    UNDELIVERABLE DOCUMENT PROCESSING Note 3    Retro to 1/1/2009    ***    ***    PSA    Active
4733    ELECTRONIC ARCHIVAL FEE (Statement) Note 3    Retro to 1/1/2009    ***    ***    PSA    Active
4738    EMESSENGER ELECTRONIC IMAGE SCAN/STORAGE Note 3    Retro to 1/1/2009    ***    ***    PSA    Active
6040    MAILTRACKER SERVICES    ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      
6222    FIRST IMAGES RETRIEVAL    TSA Element    ***    ***    TSA    Active
6225    FIRST IMAGE CHECK STORAGE    TSA Element    ***    ***    TSA    Active
6404    CHECK CLEARING    ***    ***    ***    TSA    Active
      ***    ***    ***      
      ***    ***    ***      
6406    EXCEPTION ITEM REVIEW WITH IMAGE    TSA Element    ***    ***    TSA    Active
6408    EXCEPTIONS-DISPLAYED ON ACS-REJECTS    TSA Element    ***    ***    TSA    Active
6411    CHECK RETURNS    TSA Element    ***    ***    TSA    Active
6414    CHECK RETURNS-FAX SURCHARGE    TSA Element    ***    ***    TSA    Active
6416    CHECK STOP PAYMENT-ADD    TSA Element    ***    ***    TSA    Active
6418    CHECK STOP PAY-BLOCK RANGE    TSA Element    ***    ***    TSA    Active
6420    CHECK RETRIEVAL-REQUEST    TSA Element    ***    ***    TSA    Active
6422    CHECK RETRIEVAL-SAME DAY    TSA Element    ***    ***    TSA    Active
6424    CHECK RETRIEVAL-FAX SURCHARGE    TSA Element    ***    ***    TSA    Active
6427    IMAGE STATEMENTS-FDR    TSA Element    ***    ***    TSA    Active
6428    IMAGE STATEMENTS-CUSTOMER    TSA Element    ***    ***    TSA    Active
6429    IMAGE STATEMENTS-STATEMENT REPRINTS    TSA Element    ***    ***    TSA    Active
6430    STATEMENT MESSAGE SET UP    TSA Element    ***    ***    TSA    Active
6432    STATEMENT-FORM SET UP    TSA Element    ***    ***    TSA    Active

 

 

Schedule C    C - 23    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

6434    ENVELOPES - CHECK PROCESSING    TSA Element    ***    ***    TSA    Active
6435    SIGNATURE DATABASE BUILD    TSA Element    ***    ***    TSA    Active
6436    SIGNATURE-COMPARISON    TSA Element    ***    ***    TSA    Active
6444    ACH-TRANSACTION FEE    TSA Element    ***    ***    TSA    Active
6448    ACH-STOP PAYMENT REQUEST    TSA Element    ***    ***    TSA    Active
6461    ACH RETURNS    TSA Element    ***    ***    TSA    Active
6471    IMPLEMENTATION FEES    TSA Element    ***    ***    TSA    Active
6472    SPECIAL PROGRAMMING-CHECK    TSA Element    ***    ***    TSA    Active
6473    FORMS    TSA Element    Various    Various    TSA    Active
6474    FLOAT CREDIT    TSA Element    Various    Various    TSA    Active
6475    POSTAGE    TSA Element    Various    Various    TSA    Active
6476    FLOAT    TSA Element    Various    Various    TSA    Active
6477    COURIER SERVICE    TSA Element    Various    Various    TSA    Active
6478    CONNECTIVITY    TSA Element    Various    Various    TSA    Active
6479    ADDITIONAL FED FEES    TSA    Various    Various    TSA    Active
7118    EMERCHANTVIEW MONTHLY USER BILLING       ***    ***    TSA    Active
7161    CRF STATEMENT PRODUCTION RESULTS    Bundled to 7445    ***    ***    TSA    Active
7162    CRF PLASTICS TOTALS    Bundled to 7473    ***    ***    TSA    Active
7163    CRF PLASTIC PRODUCTION RESULTS    Bundled to 7445    ***    ***    TSA    Active
7165    CRF PLASTICS DECISIONQUEST DECISIONING    Bundled to 7445    ***    ***    TSA    Active
7166    CRF PLASTICS DMM DECISIONING    Bundled to 7445    ***    ***    TSA    Active
7167    CRF STATEMENTS DMM DECISIONING    Bundled to 7445    ***    ***    TSA    Active
7178    YEAR-END SUMMARY LOGO AND OVERLAY SET-UP       ***    ***    PSA    Active
7182    PHYSICAL CONSOLIDATION OF PRINTED DOCS       ***    ***    PSA    Active
7183    14 POCKET INSERTING       ***    ***    PSA    Active
7186    BACKERS, MESSAGE PAGE AND LETTERS       ***    ***    PSA    Active
7187    CHECKS, COUPONS AND AD MESSAGES       ***    ***    PSA    Active
7188    SCANNING OF LOGOS AND SIGNATURES       ***    ***    PSA    Active
7197    STATEMENT - ENTERPRISE PAGE 1 DUPLEX       ***    ***    PSA    Active
7199    STATEMENT - ENTERPRISE ADDL PAGES DUPLEX       ***    ***    PSA    Active

 

 

Schedule C    C - 24    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

7207    LETTER    Drives to 7471    ***    ***    PSA    Active
7209    LETTER - ADDITIONAL PAGES       ***    ***    PSA    Active
7210    LETTER - PRIORITY MAIL       ***    ***    PSA    Active
7211    LETTER-MAIL HANDLING    Valid per LOA    ***    ***    PSA    Active
7212    LETTER - GROUP SAMPLES       ***    ***    PSA    Active
7213    LETTER - SET UP, REVISIONS/DEL    Per half hour    ***    ***    PSA    Active
7214    CARDHOLDER NOTICE       ***    ***    PSA    Active
7227    ANNUAL ACTIVITY SUMMARY       ***    ***    PSA    Active
7228    ANNUAL ACTIVITY SUM-DETAIL STORAGE       ***    ***    PSA    Active
7230    COMPANY CARD REPORT MAIL PREP    Valid PSA    ***    ***    PSA    Active
7231    IRS REPORTING    Valid PSA    ***    ***    PSA    Active
7237    ON-LINE CHECK ORDER SERVICE       ***    ***    PSA    Active
7243    ANNUAL ACTIVITY SUMMARY - ENHANCED       ***    ***    PSA    Active
7325    PRE-PRESS FORM SETUP       ***    ***    PSA    Active
7327    PRE-PRESS ADDITIONAL PROOFS       ***    ***    PSA    Active
7328    PRE-PRESS NEGATIVE CHARGE       ***    ***    PSA    Active
7340    BALANCE CONSOLIDATION - CHECK REQUEST    ***    ***    ***    TSA    Active
7400    ONLINE REPORT PRINTING    Bundled to 7445    ***    ***    TSA    Active
7403    REPORTS - HARDCOPY       ***    ***    TSA    Active
7413    OARS - PAGES       ***    ***    PSA    Active
7431    REPORT ORGANIZER AND WRITER (ROW)    TSA Element    ***    ***    TSA    Active
7433    OARS 30 DAY VIEW    TSA Element    ***    ***    TSA    Active
7434    OARS 60 DAY VIEW    TSA Element    ***    ***    TSA    Active
7435    OARS 75 DAY VIEW    TSA Element    ***    ***    TSA    Active
7436    OARS 90 DAY VIEW    TSA Element    ***    ***    TSA    Active

7449

RIGHT ANGLE

  

PRINT 11 IN CHKS/CPN SIM PAGE 1 CONT.

(Note 2)

   ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      

7449

FLAT

  

PRINT 11 IN CHKS/CPN SIM PAGE 1 CONT.

(Note 2)

   Effective 12/1 checks count toward 8MM    ***    ***    PSA    Active
7494    REPORT ORGANIZER AND WRITER (ROW) - IDP    TSA Element    ***    ***    TSA    Active

 

 

Schedule C    C - 25    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of

Execution
Date

  

12/1/09

Price

  

TSA /
PSA

  

Active /
Inactive

7521    HOURLY COMPOSITION       ***    ***    PSA    Active
7522    IMAGE COMPOSITION RUSH       ***    ***    PSA    Active
7601    STANDARD EMBOSSING    Volume driving to 7473    ***    ***    PSA    Inactive
7606    PLASTICARD MAIL HANDLING       ***    ***    PSA    Active
7608    PIN\POST MAILER PROCESSING       ***    ***    PSA    Active
7609    PLASTICARD MANUAL RUSH EMBOSS SAME DAY       ***    ***    PSA    Active
7610    PLASTICARD MANUAL RUSH EMBOSS 2 DAY    Valid PSA    ***    ***    PSA    Active
7611    AUTOMATIC RUSH EMBOSSING    Same Day    ***    ***    PSA    Active
7613    PLASTICARD HOT STAMPING       ***    ***    PSA    Inactive
7615    PLASTICARD PURGING       ***    ***    PSA    Active
7616    PLASTICARD INSERTING    Manual Element.    ***    ***    PSA    Active
7618    PLASTICARD JOB PROCESSING       ***    ***    PSA    Active
7621    PLASTICARD BRAILLE EMBOSSING       ***    ***    PSA    Active
7625    PLASTICARD BULK PKG-BASIC SORT       ***    ***    PSA    Active
7627    PLASTICARD-FORMS PURCHASED    Plastics forms for Mass    VARIOUS    VARIOUS    PSA    Active
7628    PLASTICS PURCHASED    Plastics, Labels, Art Charges, Rush Charges    VARIOUS    VARIOUS    PSA    Active
7629    PLASTICARD INCOMING MATERIAL SHIPPING    Inbound shipping    VARIOUS    VARIOUS    PSA    Active
7633    PLASTICARD BULK PACKAGING-3 DIGIT    Valid PSA    ***    ***    PSA    Active
7634    PLASTICARD BULK PACKAGING – 5 DIGIT       ***    ***    PSA    Active
7639    PLASTICARD IMAGE SCANNING       ***    ***    PSA    Active
7640    PLASTICARD EXPEDITED TURNAROUND    ***    ***    ***    PSA    Active
7642    IMAGE MANAGEMENT    Replaced by 7700    ***    ***    PSA    Active
7651    PLASTICARD STANDARD EMBOSSING-MASS       ***    ***    PSA    Active
7660    PLASTICARD INSERTING-MASS       ***    ***    PSA    Inactive
7664    PLASTICARD PHOTO TRANSFER-UP TO 1X1    Used with element 7665 and 7666    ***    ***    PSA    Active

 

 

Schedule C    C - 26    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as
of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

7665    PLASTICARD PHOTO/SIG SCAN/DIG-UP TO 1X1    Used with element 7664 and 7666    ***    ***    PSA    Active
7666    PLASTICARD PHOTO IMG HAND/MRG-UP TO 1X1    Used with element 7664 and 7665    ***    ***    PSA    Active
7667    PLASTICARD PHOTO TRANSFER-1X1 TO 2X2    Used with element 7668 and 7669    ***    ***    PSA    Active
7668    PLASTICARD PHOTO SCAN/DIG-1X1 TO 2X2    Used with element 7667 and 7669    ***    ***    PSA    Active
7669    PLASTICARD PHOTO IMG HAND/MRG-1X1 TO 2X2    Used with element 7667 and 7668    ***    ***    PSA    Active
7677    PLASTICARD LASER PIN/POST MAILER PROC       ***    ***    PSA    Active
7678    PLASTICS - SAME DAY       ***    ***    PSA    Active
7682    PLASTICARD ENTERPRISE PRES. ADD’L PAGE       ***    ***    PSA    Active
7688    PLASTICARD ULTRAFORMS       ***    ***    PSA    Inactive
7689    PLASTICARD TEMPLATE CREATION       ***    ***    PSA    Active
7692    PLASTICARD - RECORDS PROCESSED    Bundled to 7445    ***    ***    PSA    Active
7700    PLASTICARD IMAGE MANAGEMENT 2X2   

Remote Scan by GE

Used with element 7797

   ***    ***    PSA    Active
7702    PLASTICARD OBSOLETE PLASTIC FEE       ***    ***    PSA    Active
7703    PLASTICARD OBSOLETE PAPER FEE       ***    ***    PSA    Active
7706    PRINT AND MAIL OBSOLETE PAPER FEE       ***    ***    PSA    Active
7738    PLASTICARD FRONT INDENT PRINT    Bundled to 7473    ***    ***    PSA    Inactive
7744    PLASTICARD CIU CANCELS       ***    ***    PSA    Inactive
7747    PLASTICARD HAND EMBOSSING       ***    ***    PSA    Active
7751    PLASTICARD ENTERPRISE PRESENTATION SETUP       ***    ***    PSA    Inactive
7763    PLASTICARD/PEP CARD CARRIER 17       ***    ***    PSA    Active
7795    DIGITAL CARD PRINT IMAGING SERVICES    (Scan by FD)    ***    ***    PSA    Active
7796    DIGITAL CARD PRINTING IMAGE APPLICATION    Used with element 7795    ***    ***    PSA    Active
7797    DIGITAL CARD PRINT - CARDHOLDER LEVEL    Used with element 7700    ***    ***    PSA    Active
7801    PRINT 11 IN SIMPLEX - PAGE 1 CONT.       ***    ***    PSA    Active

 

 

Schedule C    C - 27    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as
of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

7802    PRINT 14 IN SIMPLEX - PAGE 1 CONT.       ***    ***    PSA    Active

7802

JCP

   PRINT 14 IN SIMPLEX - PAGE 1 CONT.       ***    ***    PSA    Active
7804    PRINT/MAIL PREP 11 IN DUP ADDL. PG CONT.       ***    ***    PSA    Active
7806    PRINT/MAIL PREP 14 IN DUP ADDL. PG CONT.       ***    ***    PSA    Active
7808    LETTER 14    Manually Billed only    ***    ***    PSA    Inactive
7813    PRINT 11 IN DUPLEX - PAGE 1 CONT.       ***    ***    PSA    Active
7814   

PRINT 14 IN DUPLEX - PAGE 1 CONT.

(Note 1)

      ***    ***    PSA    Active
7814    PRINT 14 IN DUPLEX - PAGE 1 CONT.    ***CONTINUOUS    ***    ***    PSA    Active
7814    PRINT 14 IN DUPLEX - PAGE 1 CONT.    SCS RSF ONLY    ***    ***    PSA    Active
7825    INDIVIDUAL CHECK COUNT    ***    ***       PSA    Active
      ***    ***         
      ***    ***         
7825    INDIVIDUAL CHECK COUNT (Note 2)    ***       ***    PSA    Active
      ***       ***      
7826    INDIVIDUAL COUPON COUNT    ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
7827    INDIVIDUAL REWARD CHECK/COUPON COUNT    ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
7844    PRINT/MAIL PREP 11 CK/CP SIM ADL PG CONT       ***    ***    PSA    Active

7845

Right

Angle

  

PRINT 11 IN CHK/CPN DUPLEX - PAGE 1 CONT

(Note 2)

   ***    ***    ***    PSA    Active
      ***    ***    ***      
      ***    ***    ***      
      ***    ***    ***      

7845

Flat

   PRINT 11 IN CHK/CPN DUPLEX - PAGE 1 CONT (Note 2)    1 page with CHK/CPN at bottom    ***    ***    PSA    Active
7846    PRINT/MAIL PREP 11 CK/CP DUP ADL PG CONT (Note 2)       ***    ***    PSA    Active
7894    STMT-ENTERPRISE ADDL PAGES SIMPLEX - 11       ***    ***    PSA    Active
7896    STMT - ENTERPRISE PAGE 1 SIMPLEX - 14       ***    ***    PSA    Active

 

 

Schedule C    C - 28    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as
of
Execution
Date

  

12/1/09
Price

  

TSA /
PSA

  

Active /
Inactive

7897

   STMT - ENTERPRISE PAGE 1 DUPLEX - 14       ***    ***    PSA    Active

7898

   STMT - ENTERPRISE ADDL PGS SMPX 14       ***    ***    PSA    Active

7928

   EMERGENCY CASH/CARD REQUESTED - FDR    Bundled to 7651    ***    ***    PSA    Inactive

8310

   STATEMENT-CHECKS AND COUPONS CREATION    ***    ***    ***    PSA    Active
      ***    ***         
      ***    ***         

8319

   AFP/ON DEMAND       ***    ***    TSA    Active

9950

   ULTRAFORMS CARD CARRIER       ***    ***    PSA    Inactive

9951

   PLASTICARD ENTERPRISE PRES. CARD CARRIER       ***    ***    PSA    Active

4741

   Electronic Web Presentment-eLetter Note 3    New    ***    ***    PSA    Active

4742

   Archival Fee/Month Over 3 Months-eLetter Note 3    New    ***    ***    PSA    Active

7828

   STMT MAILING 2 BUSINESS DAY    (Aug 20, 2009 - Feb 2010)    ***    ***    PSA    Active

7830

   STMT MAILING CALENDAR DAY    Bundled to 7828    ***    ***    PSA    Active

4398

   MISCELLANEOUS    Typically used for postage adjustments and for credits that don’t fit a specific element number    Various    Various   

TSA /

PSA

   Active

4381

   SYSTEM ADJUSTMENT    For Write Offs    Various    Various    TSA    Active

 

* For production of items on the First Data System

Note 1 – Note 1 – For portfolios that are migrating to SCS Services prior to 12/1/09, the 12/1/09 price will be in effect. For the *** and Sales Finance portfolios which as of the Execution Date have already migrated to SCS 12/1/09 pricing becomes effective 12/1/09.This applies to elements 4720 CORRESPONDENCE DIRECTOR, element 7814 PRINT 14 IN DUPLEX – PAGE 1 CONT, and element 4705 COLOR DULEX BLACK ON BACK 14IN

Note 2 – Effective 12/1/2009 Volume counts toward the 8MM MICR

Note 3 – Subject to execution of GEOS eMessenger Amendment

 

 

Schedule C    C - 29    RCSI / First Data Confidential


Final Execution Version

 

(b) Pass Through Billing Elements

 

Element

  

Name

  

Description

  

Price as
of
Execution
Date

  

12/1/09 Price

4338    WAREHOUSE REWORK FEE    3rd Party Rework    Various    Various
4324    PRINTMAIL MLOCR    Zip Sort Eligible - No    ***    ***
4365    REBILL - TRAVEL & EXPENSE       Various    Various
4368    REBILL - EQUIPMENT       Various    Various
4369    REBILL - FORMS/ENVELOPES    Forms Destruction    Various    Various
4379    REBILL - PRINTING       Various    Various
4390    REBILL - SHIPPING       Various    Various
4393    PASS-THROUGH EXPENSE       Various    Various
4415    DHL       Various    Various
4416    FEDERAL EXPRESS       Various    Various
4434    POSTAGE CREDIT - MAADC    Print/Mail Zip Sort Element    ***    ***
4436    POSTAGE CREDIT - AADC    Print/Mail Zip Sort Element    ***    ***
4437    POSTAGE CREDIT - PRESORT    Print/Mail Zip Sort Element    ***    ***
4438    POSTAGE CREDIT - 3-DIGIT AUTOMATED    Print/Mail Zip Sort Element    ***    ***
4439    POSTAGE CREDIT - 5-DIGIT AUTOMATED    Print/Mail Zip Sort Element    ***    ***
4454    POSTAGE CREDIT - MAADC - POSTCARD    Print/Mail Zip Sort Element    ***    ***
4456    POSTAGE CREDIT - AADC - POSTCARD    Print/Mail Zip Sort Element    ***    ***
4457    POSTAGE CREDIT - PRESORT - POSTCARD    Print/Mail Zip Sort Element    ***    ***
4458    POSTAGE CREDIT - 3-DIGIT AUTOMATED - POSTCARD    Print/Mail Zip Sort Element    ***    ***
4459    POSTAGE CREDIT - 5-DIGIT AUTOMATED -POSTCARD    Print/Mail Zip Sort Element    ***    ***
4494    PL - POSTAGE CREDIT - MAADC    Plastics Zip Sort Element    ***    ***
4496    PL - POSTAGE CREDIT - BASIC AUTOMATED    Plastics Zip Sort Element    ***    ***
4497    PL - POSTAGE CREDIT - PRESORT    Plastics Zip Sort Element    ***    ***
4498    PL - POSTAGE CREDIT - 3-DIGIT AUTOMATED    Plastics Zip Sort Element    ***    ***
4499    PL - POSTAGE CREDIT - 5-DIGIT AUTOMATED    Plastics Zip Sort Element    ***    ***
4800    PLASTICS PSTG 1OZ INDICIA    Zip Sort Eligible - Yes    ***    ***
4801    PRINTMAIL PSTG 1OZ INDICIA    Zip Sort Eligible - Yes    ***    ***
4802    PLASTICS PSTG 2OZ INDICIA    Zip Sort Eligible - Yes    ***    ***
4803    PRINTMAIL PSTG 2OZ INDICIA    Zip Sort Eligible - Yes    ***    ***
4804    PLASTICS PSTG 3OZ INDICIA    Zip Sort Eligible - Yes    ***    ***
4805    PRINTMAIL PSTG 3OZ INDICIA    Zip Sort Eligible - Yes    ***    ***
4806    PLASTICS PSTG FOREIGN    Zip Sort Eligible - No    ***    ***
4807    PRINTMAIL PSTG FOREIGN    Zip Sort Eligible - No    ***    ***

 

 

Schedule C    C - 30    RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of

Execution

Date

  

12/1/09 Price

4808    PLASTICS STANDARD A PERMIT POSTAGE    Zip Sort Eligible - No    ***    ***
4809    PRINTMAIL STANDARD A PERMIT POSTAGE    Zip Sort Eligible - No    ***    ***
4810    PLASTICS PSTG EXPRESS MAIL    Zip Sort Eligible - No    Various    ***
4811    PRINTMAIL PSTG EXPRESS MAIL    Zip Sort Eligible - No    Various    ***
4812    PLASTICS PSTG METERED OVRWT/FRGN/MISC    Zip Sort Eligible - No    Various    ***
4813    PRINTMAIL PSTG METERED OVRWT/FRGN/MISC    Zip Sort Eligible - No    Various    ***
4814    PLASTICS PSTG 1OZ METERED SORTED    Zip Sort Eligible - Yes    ***    ***
4815    PRINTMAIL PSTG 1OZ METERED SORTED    Zip Sort Eligible - Yes    ***    ***
4816    PLASTICS PSTG 2OZ METERED SORTED    Zip Sort Eligible - Yes    ***    ***
4817    PRINTMAIL PSTG 2OZ METERED SORTED    Zip Sort Eligible - Yes    ***    ***
4818    PLASTICS PSTG 3OZ METERED SORTED    Zip Sort Eligible - Yes    ***    ***
4819    PRINTMAIL PSTG 3OZ METERED SORTED    Zip Sort Eligible - Yes    ***    ***
4820    PLASTICS PSTG REGISTERED    Zip Sort Eligible - No    Various    ***
4821    PRINTMAIL PSTG REGISTERED    Zip Sort Eligible - No    Various    ***
4822    PLASTICS PSTG CERTIFIED    Zip Sort Eligible - No    Various    ***
4823    PRINTMAIL PSTG CERTIFIED    Zip Sort Eligible - No    Various    ***
4824    PLASTICS PSTG PRIORITY MAIL    Zip Sort Eligible - No    Various    ***
4825    PRINTMAIL PSTG PRIORITY MAIL    Zip Sort Eligible - No    Various    ***
4826    PRINTMAIL PSTGE POST CARD    Zip Sort Eligible - Yes    ***    ***
4828    PLASTICS PSTG 1OZ METERED FULL RATE    Zip Sort Eligible - No    ***    ***
4829    PRINTMAIL PSTG 1OZ METERED FULL RATE    Zip Sort Eligible - No    ***    ***
4830    PLASTICS PSTG 2OZ METERED FULL RATE    Zip Sort Eligible - No    ***    ***
4831    PRINTMAIL PSTG 2OZ METERED FULL RATE    Zip Sort Eligible - No    ***    ***
4832    PLASTICS PSTG 3OZ METERED FULL RATE    Zip Sort Eligible - No    ***    ***
4833    PRINTMAIL PSTG 3OZ METERED FULL RATE    Zip Sort Eligible - No    ***    ***
4834    MACHINE REJECT MAIL    Zip Sort Eligible - No    ***    ***
4835    PLASTICS MLOCR    Zip Sort Eligible - No    ***    ***
7417 RCF    DAILY BASE POSTAGE DISCOUNTS    PRINT/MAIL    ***    ***
7417 RSF    DAILY BASE POSTAGE DISCOUNTS    PRINT/MAIL    ***    ***
7495 RSF    DAILY BASED POSTAGE DISCOUNTS - PLASTICS    PLASTICS    ***    ***

 

 

Schedule C    C - 31   

RCSI / First Data Confidential


Final Execution Version

 

Element

  

Name

  

Description

  

Price as

of
Execution
Date

  

12/1/09
Price

S7495

RCF

   DAILY BASED POSTAGE DISCOUNTS - PLASTICS    PLASTICS    ***    ***

Note that column headings of Active/Inactive mean that as of the Execution Date RCSI is actively using or not actively using this item, as the case may be. Column headings of PSA/TSA designate which Agreement (this Agreement or the TSA, as the case may be) controls such charge.

 

 

Schedule C    C - 32    RCSI / First Data Confidential


Final Execution Version

EXHIBIT C-5

*** EXAMPLES

The cross references in the attached *** examples are from the Original Agreement and are deemed amended to reflect the appropriate changes to such Section numbers in this Agreement.

 

Exhibit C-5    C-5 - 1    RCSI / First Data Confidential


Exhibit C-12 to TSA

Exhibit E to PSA

RCSI *** Definition

***

[The following five pages were omitted pursuant to the confidential treatment request.]


Final Execution Version

 

 

EXHIBIT C-6

INTENTIONALLY LEFT BLANK

 

Exhibit C-6    C-6 - 1    RCSI / First Data Confidential


Final Execution Version

EXHIBIT C-7

***

[The following five pages were omitted pursuant to the confidential treatment request.]

 

Exhibit C-7    C-7 - 1    RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE D

KEY FIRST DATA POSITIONS

 

I. In accordance with Section 5.1 of this Agreement, the following are the Key First Data Positions:

 

  A. Executive Sponsor

 

  B. First Data Contract Administrator

 

  C. Vice President, PSA Relationship Executive

 

  D. Director, Contract Administrator

 

  E. Director, Customer Operations

 

  F. Director, Quality and Reporting

 

II. The personnel approved as of the Effective Date to fill the Key First Data Positions, and the periods of time such persons shall remain in such positions, subject to the exceptions noted in Section 5.1(c) of this Agreement, are as follows:

NOTE: The Key First Data Positions marked with an asterisk (*) behind the title will not be assigned to the RCSI account on a dedicated basis.

 

Key First Data Position

  

Name of Personnel

  

Time of Tenure

First Data Executive Sponsor*   

Gay Rich

   Two (2) years from the Effective Date
First Data Contract Administrator   

Patty Gaston

   Two (2) years from the Effective Date
Vice President, PSA Relationship Executive    Karol Svoboda    Two (2) years from the Effective Date
Director   

Matt Peters

   Six (6) Months from the Effective Date
Director, Customer Operations   

Brian Reznicek

   Two (2) years from the Effective Date
Director, Quality and Reporting*   

Patrick Keenan

   Two (2) years from Effective Date

 

 

Schedule D   D - 1   RCSI / First Data Confidential


Final Execution Version

SCHEDULE E

FACILITIES

The chart below lists the primary First Data facilities from which First Data provides the Production Services as of the Execution Date of this Agreement.

 

First Data Facility

  

Address

  

Production Services Provided at that Location

Print Output Services - Pacific   

***

Omaha, NE 68114

   Print Production Services
Print Output Services - Crown Point   

***

Omaha, NE 68110

   Print Production Services
Plastic Output Services - Virginia   

***

Chesapeake, VA 23320

   Plastics Production Services
Plastic Output Services - Starwood   

***

Omaha, NE 68122

   Plastics Production Services

 

 

Schedule E   E - 1   RCSI / First Data Confidential


Final Execution Version

SCHEDULE F

*** SUBCONTRACTORS

 

1. INTRODUCTION

This Schedule F (Approved Subcontractors) comprises the list of all *** Subcontractors as of the Effective Date. Changes to this listing will be made in accordance with Section 9.6 of this Agreement.

 

2. *** SUBCONTRACTORS

 

Subcontractor

  

Scope of Services

***    *** provides mail services for Standard A mail, as well as zip sorting and mail integration services currently performed in Chesapeake, VA and in Omaha, NE.
***    Statements, Plastics and Letters generated with a foreign mailing address are presented to *** for postage adjustments prior to distribution into the USPS mail stream.
  
  
  

 

 

Schedule F   F - 1   RCSI / First Data Confidential


SCHEDULE G

REPORTS

Without limiting First Data’s obligations and RCSI’s rights set forth elsewhere in this Agreement (including Section 7.3(a)), this Schedule G lists certain reports that First Data shall create and provide to RCSI as of the Effective Date. In addition to those reports listed in this Schedule G, in accordance with Section 7.3(a) of this Agreement, First Data shall also (i) provide RCSI with ad hoc reports; and (b) develop additional reports.

A. STANDARD LISTING OF REPORTS PRODUCED BY OUTPUT SERVICES

 

         

Report Frequency

              

Report Name

  

Report Type

  

Daily

  

Weekly

  

Monthly

  

***

  

SF

  

RCF

Daily Embossing Hold Report – ***    PACT BRIO    x          x    x    x
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – Multi Dual Card    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – *** (online)    PACT BRIO    x               
Daily Embossing Hold Report – *** (offline/CML)    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – *** (offline/CML)    PACT BRIO    x               
Daily Embossing Hold Report – GEMoney    PACT BRIO    x               
Daily Embossing Hold Report – Multi PLCC    PACT BRIO    x               
Daily Embossing Hold Report – GESF    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – *** (offline/CML)    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – *** (online)    PACT BRIO    x               
Daily Embossing Hold Report – *** (off/CML)    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Embossing Hold Report – ***    PACT BRIO    x               
Daily Inventory file for GE / GEUSG    File Transmission    x             x    x


Final Execution Version

 

DAILY Low Notification Report URGENT    AS400    x          x    x    x
Daily Low Notification Report Regular    AS400    x          x    x    x
Daily Plastics GE Cycle Time Report    PACT BRIO    x       x       x    x
Daily Client Level Report – ***    PACT BRIO    x       x    x      
Daily Consumer Release Report – GESF    PACT BRIO    x       x       x   
Daily Letters GE Client Level Report – ALL    PACT BRIO    x       x    x    x    x
Daily Plastics GE BOM Report – ***    PACT BRIO    x          x      
Daily GE Formscan Letters and Replacement Stmts – SF/CF    PACT BRIO    x       x       x    x
Daily Letters GE Formscan and Replacement Stmts – ***    PACT BRIO    x       x    x      
Daily Inventory Receipt Report – by Client    PACT BRIO    x          x    x    x
IMO Flash Report    E-MAIL    x          x    x    x
Output Service Daily Issue Report    E-MAIL    x          x    x    x
BRC Statements    PACT BRIO    x       x          x
Commercial Statements    PACT BRIO    x       x          x
Consumer Statements – RCF    PACT BRIO    x       x          x
PactBrio Hold Report    PACTBRIO    x               
PactBrio Cycle Report – ***    PACTBRIO    x          x      
PactMail/FDR/FDC Invalidated Holds    PACMAIL    x               
PactMail GE offline input file received    PACMAIL    x               
PactMail GE Commercial invalid characters report    PACMAIL    x               
PactMail/FDR/FDC Conversion Report    PACMAIL    x               
Pact/Mail/FDR/FDC Conversion Report    PACMAIL    x               
Obsolete Overstock Letters Report    PACT BRIO       x       x    x    x
ISR Report For Letter Group    PACT BRIO       x       x    x    x
ISR Report by client    PACT BRIO       x       x    x    x
Weekly Open PO Report    PACT BRIO       x       x    x    x
Weekly Open PO Internal Client Report    PACT BRIO       x       x    x    x
Weekly Inventory GE Division 1    PACT BRIO       x       x    x    x

 

 

Schedule G   G - 2   RCSI / First Data Confidential


Final Execution Version

 

Weekly Inventory GE Division 2    PACT BRIO       x       x    x    x
Weekly Statements GE Multipage Report    PACT BRIO       x       x    x    x
Weekly_GE_ *** _Inventory_Div#1_Report.xls    PACT BRIO       x       x    x    x
Weekly Letters GE Report    PACT BRIO       x       x    x    x
Weekly Plastic GE Report    PACT BRIO       x       x    x    x
Weekly Inventory Received Report    PACT BRIO       x       x    x    x
Weekly Inventory Receipt Report    PACT BRIO       x       x    x    x
Weekly Inventory Receipt Report    PACT BRIO       x       x    x    x
GE Rush Summary Report    First Data          x    x    x    x
Envelope True-up Report    First Data          x    x    x    x
Omaha Letter Release    PACT BRIO          x    x    x    x
8.0 Statement Accuracy    PACT BRIO          x    x    x    x
9.0 Plastic Accuracy    PACT BRIO          x    x    x    x
Plastic Merge Bv2    PACT BRIO          x    x    x    x
Plastic Starwood    PACT BRIO          x    x    x    x
Plastic Virginia    PACT BRIO          x    x    x    x
Productivity Summary    E-MAIL          x    x    x    x
Omaha Statement Release    PACT BRIO          x    x    x    x
BM-405 – Excel    First Data          x    x    x    x
BM-406 – Excel    First Data          x    x    x    x
Mass Reissue Mail Date Report    By Project          x    x    x    x
Embossing Natural Reissue Plastics    First Data          x    x    x    x
Embossing Natural Reissue PEP Pages    First Data          x    x    x    x
Embossing Natural Reissue Postage    First Data          x    x    x    x
Embossing Mass Reissue Postage-Embossing    First Data          x    x    x    x
Embossing FDR Performance Data    First Data          x    x    x    x
Monthly GE Multipage Report    PACT BRIO          x          x
Monthly Statements GE Commercial Release    PACT BRIO          x          x
Monthly Statements GE Consumer Release    PACT BRIO          x          x
Monthly Statements GE BRC Release    PACT BRIO          x          x
Monthly Statements *** Consumer Release    PACT BRIO          x    x      
Monthly *** Formscan and Replacement Stmts    PACT BRIO          x    x      

 

 

Schedule G   G - 3   RCSI / First Data Confidential


Final Execution Version

 

B. STANDARD LISTING OF FIRST DATA SYSTEM REPORTS

To the extent the Accounts exist on the First Data System, First Data shall provide the following reports:

 

Report #

  

Report Name

BD – 028    Invoice Detail – Client Level – Postage
BD – 032    Daily Invoice
BD – 033    Invoice Detail – Client Level – Postage
BD – 031    FDR Daily Invoice Back-up Report
BD – 042    Client Billing Source Document
BM – 405    Monthly Invoice Backup Report
BM – 406    Monthly Invoice
CD – 003    Back up Billing – Urgency Letter detail
CD – 012    Embossing Production Hold Detail
CD – 014    Embossing Production Hold Summary
CD – 042    Postage Detail by product / ounces
CD – 063    Daily Embossing
CD – 1368    SCS and ABC Invoice back up detail
CD – 1369    SCS and ABC Invoice back up detail
CD – 1370    SCS and ABC Invoice back up detail – Summary
CD – 1371    Statement Insert Setup Report
CD – 159    Daily Letters Report – Invoice back up
CD – 367    Daily Letters Report
CD – 850    Daily Letters Reject Report
CD – 881    Daily Force Emboss, Rush and Reinstatement
CM – 170    Monthly Letters Tracking Report
ED – 307    Embossing Invoice Back up detail
ED – 308    Embossing Invoice Back up summary
ED – 701    Card Issuance Acceptance Report
ED – 705    Card Issuance Decline Report
ED – 706    Card Issuance Hold Report

 

 

Schedule G   G - 4   RCSI / First Data Confidential


Final Execution Version

 

ED – 709    Pin Mailers daily report
ED – 770    Natural Reissue daily/weekly files
ED – 862    Card Issuance Input Acceptance Report
MD – 159    Merchant Daily Letters Report
MD – 367    Merchant Daily Letters Reject Report
MD – 850    Merchant Daily Letters Reject Report Merchant Letters (Details Only)

 

 

Schedule G   G - 5   RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE H

HUMAN RIGHTS

PART I:

Our Commitment

RCSI, as a business enterprise, promotes the advancement of fundamental human rights. We support the principles contained in the Universal Declaration on Human Rights, remaining mindful that it is primarily addressed to nations. RCSI has joined with other companies to find practical ways of applying within the business community the broad principles established in the Declaration.

Our Actions

RCSI endeavors to advance fundamental human rights within the communities in which our businesses operate. We do this in important part by leading by example - influencing our employees and business partners through actions consistent with policies contained in the Spirit & Letter. Wherever we do business, RCSI aspires to:

In Our Management Capacity

 

    RESPECTING the human rights of our employees as established in the ILO’s (International Labour Organization) Declaration on Fundamental Principles and Rights at Work, including non-discrimination, prohibitions against child and forced labor, freedom of association and the right to engage in collective bargaining.

 

    PROVIDING security consistent with the intent of the Voluntary Principles on Security and Human Rights, as well as the laws of the countries in which we operate, retaining security services for preventative or defensive purposes with instructions to use force only when necessary and to an extent proportional to the threat.

In Our Business Capacity

 

    DEVELOPING and offering products, including those that meet human needs for power, water and medical care, with due regard for fundamental human rights and a sustainable environment.

With Our Direct Business Partners

 

    INCORPORATING appropriate principles of The Spirit & The Letter into contracts with suppliers, business partners and distributors.

 

    MONITORING adherence by key suppliers in emerging markets to environmental, health and safety standards, prohibitions against forced and child labor, and local wage and hour laws.

 

    EVALUATING human rights issues involving our direct business partners – particularly in emerging markets – and considering practical responses within the relevant context.

 

    ADVANCING application of the ILO Declaration through engagement and collaboration.

 

Schedule H    H - 1    RCSI / First Data Confidential


Final Execution Version

 

In the Community

 

    SERVING as a positive influence in communities in which we operate, demonstrating by our actions our belief that human rights violations are unacceptable.

 

    ASSESSING, as appropriate, the impact on affected local communities of major infrastructure project financing.

 

Schedule H    H - 2    RCSI / First Data Confidential


Final Execution Version

 

PART II: SUMMARY OF UNIVERSAL DECLARATION OF HUMAN RIGHTS

(The actual Declaration can be found at: www.un.org/Overview/rights.html))

Article 1

All human beings are born free and equal in dignity and rights. They are endowed with reason and conscience and should act towards one another in a spirit of brotherhood.

Article 2

Equal entitlement to all rights and freedoms in Declaration.

Article 3

Right to life, liberty and security of person.

Article 4

Slavery prohibited.

Article 5

Prohibition of torture and cruel treatment.

Article 6

Equal right to recognition as a person before the law.

Article 7

Equal protection against discrimination in violation of this Declaration.

Article 8

Right to effective remedy for acts violating his fundamental rights.

Article 9

Prohibition of arbitrary arrest, detention or exile.

Article 10

Right to fair and public hearing by an independent and impartial tribunal of his rights and obligations and of criminal charges.

Article 11

Presumed innocent until proved guilty according to law in a public trial.

 

Schedule H    H - 3    RCSI / First Data Confidential


Final Execution Version

 

No conviction of penal offense if act/omission was not such offense when committed; no heavier penalty than one applicable when offense committed.

Article 12

No arbitrary interference with privacy, family, home or correspondence, nor to attacks upon honor or reputation. Article 13

Right to freedom of movement and residence within the borders of each State.

Right to leave and return to any country.

Article 14

Right to seek and to enjoy asylum from persecution in other countries, except in the case of prosecutions arising from non-political crimes or acts contrary to the purposes and principles of the UN.

Article 15

Right to a nationality.

No arbitrary deprivation of nationality, no denial of right to change nationality.

Article 16

Men and women of full age, without any limitation due to race, nationality or religion have the right to marry and to found a family, with equal rights as to marriage, during marriage and at its dissolution.

Need free and full consent of the intending spouses.

The family is the natural and fundamental group unit of society and is entitled to protection by society and the State.

Article 17

Right to own property alone and in association with others, without arbitrary deprivation.

Article 18

Right to freedom of thought, conscience and religion.

Article 19

Right to freedom of opinion and expression.

Article 20

Right to freedom of peaceful assembly and association.

 

Schedule H    H - 4    RCSI / First Data Confidential


Final Execution Version

 

Article 21

Right to participate in the government of his country.

Equal access to public service.

The will of the people shall be the basis of the authority of the government.

Article 22

Right to social security and entitled to realization of indispensable economic, social and cultural rights.

Article 23

Right to work, to free choice of employment, to just and favorable conditions of work and to protection against unemployment.

Right to equal pay for equal work.

Right to just and favorable remuneration ensuring existence worthy of human dignity, and supplemented, if necessary by other means of social protection.

Right to form and to join trade unions.

Article 24

Right to rest and leisure, including reasonable limitation of working hours and periodic paid holidays.

Article 25

Right to a standard of living adequate for his health and well-being, including food, clothing, housing and medical care and necessary social services, and the right to security in the event of unemployment, sickness, disability, widowhood, old age or other lack of livelihood in circumstances beyond his control.

Motherhood and childhood, whether born in or out of wedlock, are entitled to special care and assistance.

Article 26

Right to education, with compulsory elementary education and at least the elementary and fundamental stages being free.

Higher education shall be equally accessible to all on the basis of merit.

Education directed to development of human personality and to strengthening respect for human rights and fundamental freedoms.

Parents have a right to choose the kind of education for their children.

 

Schedule H    H - 5    RCSI / First Data Confidential


Final Execution Version

 

Article 27

Right to participate in the cultural life of the community.

Right to the protection of moral and material interests resulting from any scientific, literary or artistic production he authors.

Article 28

Right to a social and international order in which the rights and freedoms set forth in this Declaration can be fully realized.

Article 29

Everyone has duties to the community in which the free and full development of his personality is possible.

Everyone shall be subject to such limitations determined by law for the purpose of securing due recognition and respect for the rights and freedoms of others and of meeting the just requirements of morality, public order and the general welfare in a democratic society.

 

    These rights and freedoms may in no case be exercised contrary to the purposes and principles of the UN.

Article 30

No right to engage in any activity or to perform any act aimed at the destruction of any of the rights and freedoms set forth herein.

 

Schedule H    H - 6    RCSI / First Data Confidential


Final Execution Version

 

PART III: RCSI—SUPPLIER EXPECTATIONS RELATING TO EMPLOYMENT, ENVIRONMENT, HEALTH & SAFETY

For more than a century, RCSI, its businesses, and its employees have created an asset of incalculable value — the Company’s worldwide reputation for integrity and high standards of business conduct. RCSI’s quest for competitive excellence begins and ends with its unyielding commitment to integrity.

Each employee in the RCSI community is expected to make a personal commitment to integrity, and we also expect and require high ethical conduct from all of our suppliers. A company’s strong commitment in this regard is a requirement for being an RCSI supplier and is the foundation for our mutually beneficial business relationship.

In particular, we expect RCSI suppliers to:

 

    Comply with laws and regulations protecting the environment and not adversely affect the local community.

 

    Provide workers a safe and healthy workplace.

 

    Employ workers above the applicable minimum age requirement or the age of 16, whichever is higher.

 

    Comply with laws and regulations governing wages, hours, days of service, and overtime payment for workers.

 

    Not utilize forced, prison, or indentured labor, or subject workers to any form of compulsion or coercion.

 

    Allow their workers to freely choose whether or not to organize or join associations for the purpose of collective bargaining as provided by local law.

 

    Prohibit physical, sexual or psychological harassment or coercion.

 

    Assure that workers are hired, paid and otherwise subject to terms and conditions of employment based on their ability to do the job, not on the basis of their personal characteristics such as race, national origin, sex, religion, ethnicity, disability, maternity, age, and other characteristics protected by local law. (This does not bar compliance with affirmative preferences that may be required by local law).

 

    Maintain and enforce a company policy requiring adherence to ethical business practices, including a prohibition on bribery of government officials.

 

    Respect the intellectual property of others.

 

    Maintain security measures consistent with international standards for the protection of their operations and facilities against exploitation by criminal or terrorist individuals and organizations.

 

    Expect their suppliers to conform to similar standards.

 

Schedule H    H - 7    RCSI / First Data Confidential


Final Execution Version

 

PART IV: VOLUNTARY PRINCIPLES ON SECURITY AND HUMAN RIGHTS

The Voluntary Principles on Security and Human Rights are attached as Exhibit H-1.

PART V: HUMAN RIGHTS DUE DILIGENCE

 

1 EMPLOYMENT PRACTICES

 

1.1 Forced Labor

 

  (a) Does the company take all necessary measures to ensure that it does not participate in, or benefit from any form of forced labor (this can include bonded labor, debt bondage, forced prison labor, slavery, servitude, or human trafficking)?

 

  (b) Does the company refrain from retaining the identity cards, travel documents, and other important personal papers of its employees?

 

1.2 Child labor and young workers

 

  (a) Does the company comply with minimum age standards?

 

  (b) Does the company ensure that it does not hire minors (below 16 years of age) to perform work that is hazardous or harmful to their health, safety, or morals?

 

1.3 Non-discrimination

 

  (a) Does the company ensure that its compensation, benefit plans, and employment-related decisions are based on relevant and objective criteria?

 

  (b) Does the company seek to maintain a work environment that is culturally respectful and sensitive to the needs of all workers?

 

1.4 Freedom of association

 

  (a) Does the company recognize the freedom of association rights of its workers, including the right to bargain collectively?

 

  (b) If trade unions are not allowed in the area of operation, or only state authorized organizations are allowed, does the company establish alternative measures to allow employees to gather independently to discuss work-related problems?

 

1.5 Workplace health and safety

 

  (a) Does the company ensure that its workers are afforded safe, suitable and sanitary work facilities?

 

Schedule H    H - 8    RCSI / First Data Confidential


Final Execution Version

 

 

  (b) If the company provides housing or dormitory quarters for its employees, is it adequate, clean, safe and otherwise designed and operated to respect the dignity of the employees?

 

  (c) Does the company supply its employees with the protective equipment and training necessary to perform their tasks safely?

 

1.6 Conditions of employment and work

 

  (a) Does the company take measures to protect workers from acts of physical, verbal, sexual, or psychological, harassment, abuse, or threats in the workplace, including when determining and implementing disciplinary measures?

 

  (b) Does the company have mechanisms for hearing, processing, and settling the grievances of employees?

 

  (c) Does the company adhere to the minimum wage requirements, including any restrictions on the amount of overtime? Are overtime payments consistent with applicable law?

 

  (d) Does the company grant employees paid holiday and sick leave each year, as well as parental leave for the care of a newborn or newly adopted child?

 

  (e) Does the company ensure that the work-week is limited to 48 hours, overtime is voluntary, infrequent, and does not exceed 12 hours per week, and that employees are given reasonable breaks while working, and sufficient rest periods between shifts?

 

  (f) Does the company respect the privacy rights of its employees whenever it gathers private information or implements employee-monitoring practices?

 

2 COMMUNITY IMPACT

 

2.1 Security

 

  (a) Are company security guards trained when to intervene in security-related situations and how to use the minimal authorized force necessary?

 

2.2 Land management

 

  (a) Before purchasing land, does the company consult with all affected parties, including both legal and customary owners, in order to seek their prior informed consent?

 

  (b) Does the company ensure that it does not participate in or benefit from improper forced relocations, that due process was followed in accordance with the laws of the host country, and adequately compensates inhabitants respecting involuntary relocations?

 

Schedule H    H - 9    RCSI / First Data Confidential


Final Execution Version

 

 

  (c) Does the company honor the land, passage, and usage rights of local or indigenous peoples on company-controlled land?

 

  (d) Does the company consult with the local inhabitants and take measures to address and mitigate any disruptive effects that its operations may have on company land, the local community, and the natural resources in the area?

 

  (e) To the extent that projects may affect access to water, does the company undertake to assure alternative access?

 

2.3 Environmental health and safety

 

  (a) Does the company have emergency procedures in place to effectively prevent and address all health emergencies and industrial accidents affecting the surrounding community?

 

  (b) Does the company have mechanisms for hearing, processing, and settling the grievances of the local community?

 

2.4 Corruption and bribery

 

  (a) Does the company refrain from bribing, or using any other method, to unjustly influence government officials and/or the judiciary?

 

2.5 Company products and marketing practices

 

  (a) Does the company exercise due diligence when designing, manufacturing and marketing products, to protect against product defects which could harm the life, health or safety of the consumer or others likely to be affected by the defective product?

 

  (b) Before using local artistic or copyrightable material or patenting a previously unpatented invention that has already been in use by a local or indigenous people, does the company first obtain the informed consent of the creator or owner of the work?

 

3 SUPPLY CHAIN MANAGEMENT

 

3.1 Relations with suppliers, contractors and other associates

 

  (a) Does the company screen and monitor all major suppliers, contractors, sub-suppliers, joint-venture partners, and other major business associates for commitment on human rights/social issues?

 

  (b) Does the company assure that subcontractors have policies and practices that: assure adequate health and safety, prohibit unlawful discrimination, permit freedom of association and collective bargaining, prohibit use of child and forced labor, and required payment of minimum wages and overtime?

 

Schedule H    H - 10    RCSI / First Data Confidential


Final Execution Version

 

 

 

EXHIBIT H-1

VOLUNTARY PRINCIPLES ON SECURITY AND HUMAN RIGHTS

 

Exhibit H-1    H-1 - 1    RCSI / First Data Confidential


VOLUNTARY PRINCIPLES ON SECURITY AND HUMAN RIGHTS

STATEMENT BY THE GOVERNMENTS OF

THE UNITED STATES OF AMERICA AND

THE UNITED KINGDOM

The Governments of the United States and the United Kingdom, companies in the extractive sectors (“Companies”), and non-governmental organizations, all with an interest in human rights and corporate social responsibility, have engaged in a dialogue on security and human rights.

We recognise the importance of the promotion and protection of human rights throughout the world and the constructive role business and civil society (including non-governmental organizations, labor/trade unions and local communities) can play in advancing these goals. The participants in this dialogue developed a set of voluntary principles to guide Companies in maintaining the safety and security of their operations within an operating framework that ensures respect for human rights and fundamental freedoms. Mindful of these goals, the participants agree to continue this dialogue and keep under review these principles to ensure their continuing relevance and efficacy.

This has been a cooperative and constructive process. The Governments salute the willingness of the participants — Companies and civil society alike — to address these issues seriously and with a determination to both understand and account for each other’s concerns. We look forward to continuing this dialogue in the spirit of cooperation and mutual understanding that led to broad consensus among the participants on these voluntary principles.

We hope that other companies, governments, and civil society organizations as well as international institutions will share these goals and choose to be involved in this continuing dialogue. We welcome their support for these principles as well as their participation in this dialogue. Those wishing to take up this invitation should contact either the U.S. Department of State or the Foreign and Commonwealth Office.

The companies and organizations listed below support this process and welcome these principles:

Chevron, Texaco, Freeport MacMoran, Conoco, Shell, BP, Rio Tinto, Human Rights Watch, Amnesty International, International Alert, Lawyers Committee for Human Rights, Fund for Peace, Council on Economic Priorities, Business for Social Responsibility, the Prince of Wales Business Leaders Forum, and the International Federation of Chemical, Energy, Mine and General Workers’ Unions.


December 4, 2000

Voluntary Principles on Security and Human Rights

The Governments of the United States and the United Kingdom, companies in the extractive and energy sectors (“Companies”), and non-governmental organizations, all with an interest in human rights and corporate social responsibility, have engaged in a dialogue on security and human rights.

The participants recognize the importance of the promotion and protection of human rights throughout the world and the constructive role business and civil society (including non-governmental organizations, labor/trade unions and local communities) can play in advancing these goals. Through this dialogue, the participants have developed the following set of voluntary principles to guide Companies in maintaining the safety and security of their operations within an operating framework that ensures respect for human rights and fundamental freedoms. Mindful of these goals, the participants agree to the importance of continuing this dialogue and keeping under review these principles to ensure their continuing relevance and efficacy.

Acknowledging that security is a fundamental need, shared by individuals, communities, businesses and governments alike, and acknowledging the difficult security issues faced by Companies operating globally, we recognize that security and respect for human rights can and should be consistent;

Understanding that governments have the primary responsibility to promote and protect human rights and that all parties to a conflict are obliged to observe applicable international humanitarian law, we recognize that we share the common goal of promoting respect for human rights, particularly those set forth in the Universal Declaration of Human Rights, and international humanitarian law;

Emphasizing the importance of safeguarding the integrity of company personnel and property, Companies recognize a commitment to act in a manner consistent with the laws of the countries within which they are present, to be mindful of the highest applicable international standards, and to promote the observance of applicable international law enforcement principles (e.g., the U.N. Code of Conduct for Law Enforcement Officials and the U.N. Basic Principles on the Use of Force and Firearms by Law Enforcement Officials), particularly with regard to the use of force;

Taking note of the effect that Companies’ activities may have on local communities, we recognize the value of engaging with civil society and host and home governments to contribute to the welfare of the local community while mitigating any potential for conflict where possible;

Understanding that useful, credible information is a vital component of security and human rights, we recognize the importance of sharing and understanding our respective experiences regarding, inter alia, best security practices and procedures, country human rights situations, and public and private security, subject to confidentiality constraints;

 

2


Acknowledging that home governments and multilateral institutions may, on occasion, assist host governments with security sector reform, developing institutional capacities and strengthening the rule of law, we recognize the important role Companies and civil society can play in supporting these efforts;

We hereby express our support for the following voluntary principles regarding security and human rights in the extractive sector, which fall into three categories, risk assessment, relations with public security and relations with private security:

 

3


RISK ASSESSMENT

The ability to assess accurately risks present in a Company’s operating environment is critical to the security of personnel, local communities and assets; the success of the Company’s short and long-term operations; and to the promotion and protection of human rights. hi some circumstances, this is relatively simple; in others, it is important to obtain extensive background information from different sources; monitoring and adapting to changing, complex political, economic, law enforcement, military and social situations; and maintaining productive relations with local communities and government officials.

The quality of complicated risk assessments is largely dependent on the assembling of regularly updated, credible information from a broad range of perspectives — local and national governments, security firms, other companies, home governments, multilateral institutions and civil society knowledgeable about local conditions. This information may be most effective when shared to the fullest extent possible (bearing in mind confidentiality considerations) between Companies, concerned civil society, and governments.

Bearing in mind these general principles, we recognize that accurate, effective risk assessments should consider the following factors:

 

    Identification of security risks. Security risks can result from political, economic, civil or social factors. Moreover, certain personnel and assets may be at greater risk than others. Identification of security risks allows a Company to take measures to minimize risk and to assess whether Company actions may heighten risk.

 

    Potential for violence. Depending on the environment, violence can be widespread or limited to particular regions, and it can develop with little or no warning. Civil society, home and host government representatives and other sources should be consulted to identify risks presented by the potential for violence. Risk assessments should examine patterns of violence in areas of Company operations for educational, predictive and preventative purposes.

 

    Human rights records. Risk assessments should consider the available human rights records of public security forces, paramilitaries, local and national law enforcement, as well as the reputation of private security. Awareness of past abuses and allegations can help Companies to avoid recurrences as well as to promote accountability. Also, identification of the capability of the above entities to respond to situations of violence in a lawful manner (i.e., consistent with applicable international standards) allows Companies to develop appropriate measures in operating environments.

 

    Rule of law. Risk assessments should consider the local prosecuting authority and judiciary’s capacity to hold accountable those responsible for human rights abuses and for those responsible for violations of international humanitarian law in a manner that respects the rights of the accused.

 

   

Conflict analysis. Identification of and understanding the root causes and nature of local conflicts, as well as the level of adherence to human rights and international humanitarian

 

4


 

law standards by key actors, can be instructive for the development of strategies for managing relations between the Company, local communities, Company employees and their unions, and host governments. Risk assessments should also consider the potential for future conflicts.

 

    Equipment transfers. Where Companies provide equipment (including lethal and non-lethal equipment) to public or private security, they should consider the risk of such transfers, any relevant export licensing requirements, and the feasibility of measures to mitigate foreseeable negative consequences, including adequate controls to prevent misappropriation or diversion of equipment which may lead to human rights abuses. In making risk assessments, companies should consider any relevant past incidents involving previous equipment transfers.

 

5


INTERACTIONS BETWEEN COMPANIES AND PUBLIC SECURITY

Although governments have the primary role of maintaining law and order, security and respect for human rights, Companies have an interest in ensuring that actions taken by governments, particularly the actions of public security providers, are consistent with the protection and promotion of human rights. In cases where there is a need to supplement security provided by host governments, Companies may be required or expected to contribute to, or otherwise reimburse, the costs of protecting Company facilities and personnel borne by public security. While public security is expected to act in a manner consistent with local and national laws as well as with human rights standards and international humanitarian law, within this context abuses may nevertheless occur.

In an effort to reduce the risk of such abuses and to promote respect for human rights generally, we have identified the following voluntary principles to guide relationships between Companies and public security regarding security provided to Companies:

Security Arrangements

 

    Companies should consult regularly with host governments and local communities about the impact of their security arrangements on those communities.

 

    Companies should communicate their policies regarding ethical conduct and human rights to public security providers, and express their desire that security be provided in a manner consistent with those policies by personnel with adequate and effective training.

 

    Companies should encourage host governments to permit making security arrangements transparent and accessible to the public, subject to any overriding safety and security concerns.

Deployment and Conduct

 

    The primary role of public security should be to maintain the rule of law, including safeguarding human rights and deterring acts that threaten Company personnel and facilities. The type and number of public security forces deployed should be competent, appropriate and proportional to the threat.

 

    Equipment imports and exports should comply with all applicable law and regulations. Companies that provide equipment to public security should take all appropriate and lawful measures to mitigate any foreseeable negative consequences, including human rights abuses and violations of international humanitarian law.

 

    Companies should use their influence to promote the following principles with public security: (a) individuals credibly implicated in human rights abuses should not provide security services for Companies; (b) force should be used only when strictly necessary and to an extent proportional to the threat; and (c) the rights of individuals should not be violated while exercising the right to exercise freedom of association and peaceful assembly, the right to engage in collective bargaining, or other related rights of Company employees as recognized by the Universal Declaration of Human Rights and the ILO Declaration on Fundamental Principles and Rights at Work.

 

6


    In cases where physical force is used by public security, such incidents should be reported to the appropriate authorities and to the Company. Where force is used, medical aid should be provided to injured persons, including to offenders.

Consultation and Advice

 

    Companies should hold structured meetings with public security on a regular basis to discuss security, human rights and related work-place safety issues. Companies should also consult regularly with other Companies, host and home governments, and civil society to discuss security and human rights. Where Companies operating in the same region have common concerns, they should consider collectively raising those concerns with the host and home governments.

 

    In their consultations with host governments, Companies should take all appropriate measures to promote observance of applicable international law enforcement principles, particularly those reflected in the U.N. Code of Conduct for Law Enforcement Officials and the U.N. Basic Principles on the Use of Force and Firearms.

 

    Companies should support efforts by governments, civil society and multilateral institutions to provide human rights training and education for public security as well as their efforts to strengthen state institutions to ensure accountability and respect for human rights.

Responses to Human Rights Abuses

 

    Companies should record and report any credible allegations of human rights abuses by public security in their areas of operation to appropriate host government authorities. Where appropriate, Companies should urge investigation and that action be taken to prevent any recurrence.

 

    Companies should actively monitor the status of investigations and press for their proper resolution.

 

    Companies should, to the extent reasonable, monitor the use of equipment provided by the Company and to investigate properly situations in which such equipment is used in an inappropriate manner.

 

    Every effort should be made to ensure that information used as the basis for allegations of human rights abuses is credible and based on reliable evidence. The security and safety of sources should be protected. Additional or more accurate information that may alter previous allegations should be made available as appropriate to concerned parties.

 

7


INTERACTIONS BETWEEN COMPANIES AND PRIVATE SECURITY

Where host governments are unable or unwilling to provide adequate security to protect a Company’s personnel or assets, it may be necessary to engage private security providers as a complement to public security. In this context, private security may have to coordinate with state forces, (law enforcement, in particular) to carry weapons and to consider the defensive local use of force. Given the risks associated with such activities, we recognize the following voluntary principles to guide private security conduct:

 

    Private security should observe the policies of the contracting Company regarding ethical conduct and human rights; the law and professional standards of the country in which they operate; emerging best practices developed by industry, civil society, and governments; and promote the observance of international humanitarian law.

 

    Private security should maintain high levels of technical and professional proficiency, particularly with regard to the local use of force and firearms.

 

    Private security should act in a lawful manner. They should exercise restraint and caution in a manner consistent with applicable international guidelines regarding the local use of force, including the U.N. Principles on the Use of Force and Firearms by Law Enforcement Officials and the U.N. Code of Conduct for Law Enforcement Officials, as well as with emerging best practices developed by Companies, civil society, and governments.

 

    Private security should have policies regarding appropriate conduct and the local use of force (e.g., rules of engagement). Practice under these policies should be capable of being monitored by Companies or, where appropriate, by independent third parties. Such monitoring should encompass detailed investigations into allegations of abusive or unlawful acts; the availability of disciplinary measures sufficient to prevent and deter; and procedures for reporting allegations to relevant local law enforcement authorities when appropriate.

 

    All allegations of human rights abuses by private security should be recorded. Credible allegations should be properly investigated. In those cases where allegations against private security providers are forwarded to the relevant law enforcement authorities, Companies should actively monitor the status of investigations and press for their proper resolution.

 

    Consistent with their function, private security should provide only preventative and defensive services and should not engage in activities exclusively the responsibility of state military or law enforcement authorities. Companies should designate services, technology and equipment capable of offensive and defensive purposes as being for defensive use only.

 

   

Private security should (a) not employ individuals credibly implicated in human rights abuses to provide security services; (b) use force only when strictly necessary and to an extent proportional to the threat; and (c) not violate the rights of individuals while

 

8


 

exercising the right to exercise freedom of association and peaceful assembly, to engage in collective bargaining, or other related rights of Company employees as recognized by the Universal Declaration of Human Rights and the ILO Declaration on Fundamental Principles and Rights at Work.

 

    In cases where physical force is used, private security should properly investigate and report the incident to the Company. Private security should refer the matter to local authorities and/or take disciplinary action where appropriate. Where force is used, medical aid should be provided to injured persons, including to offenders.

 

    Private security should maintain the confidentiality of information obtained as a result of its position as security provider, except where to do so would jeopardize the principles contained herein.

To minimize the risk that private security exceed their authority as providers of security, and to promote respect for human rights generally, we have developed the following additional voluntary principles and guidelines:

 

    Where appropriate, Companies should include the principles outlined above as contractual provisions in agreements with private security providers and ensure that private security personnel are adequately trained to respect the rights of employees and the local community. To the extent practicable, agreements between Companies and private security should require investigation of unlawful or abusive behavior and appropriate disciplinary action. Agreements should also permit termination of the relationship by Companies where there is credible evidence of unlawful or abusive behavior by private security personnel.

 

    Companies should consult and monitor private security providers to ensure they fulfil their obligation to provide security in a manner consistent with the principles outlined above. Where appropriate, Companies should seek to employ private security providers that are representative of the local population.

 

    Companies should review the background of private security they intend to employ, particularly with regard to the use of excessive force. Such reviews should include an assessment of previous services provided to the host government and whether these services raise concern about the private security firm’s dual role as a private security provider and government contractor.

 

    Companies should consult with other Companies, home country officials, host country officials, and civil society regarding experiences with private security.

Where appropriate and lawful, Companies should facilitate the exchange of information about unlawful activity and abuses committed by private security providers.

 

9


Final Execution Version

 

SCHEDULE I

RCSI INTEGRITY POLICIES

 

LOGO

 

  

Compliance Education

For

GE Service Providers

  

Sharing The

Commitment

to

Integrity

Your Responsibilities

While On a GE Assignment

 

   This document provides an overview of policies for service providers to GE. It is not intended to create any contractual rights, including employment with GE.   

 

Schedule I    I - 1    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

YOUR RESPONSIBILITIES WHILE ON A GE ASSIGNMENT

 

    During your assignment at GE, you are required to maintain the same high level of integrity that GE demands of its own employees. The purpose of this document is to inform you of GE’s code of conduct and provide you with an overview of the policies and procedures which support that code.

 

    Please review this document. You will be asked to sign the acknowledgment form which includes an agreement to comply with the policies in this document.

 

    If you have questions or concerns about any of the policies, contact your primary GE contact, the GE Business Integrity Helpline (see list on page 12), or the GE Ombudsperson’s office (page 12).

 

 

A SOLID BASE FOR BUSINESS SUCCESS

Integrity is the rock upon which GE builds its business success. GE’s quest for competitive excellence begins and ends with its commitment to ethical conduct. As noted by Jack Welch, Chief Executive Officer and Chairman of the Board for GE: “ No matter how hard we compete – here and around the world – not one foot must ever step outside the line of absolute integrity.”

 

 

GE’S CODE OF CONDUCT

GE’s Code of Conduct states the broad principles supporting its ethical commitment. The Code calls for individuals to:

 

    Obey applicable laws and regulations.

 

    Be honest, fair and trustworthy in all GE activities.

 

    Avoid all conflicts of interest.

 

    Extend equal opportunity to the diverse GE community.

 

    Strive for a safe workplace and protected environment.

 

    Recognize, value and exemplify ethical conduct.

 

Schedule I    I - 2    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

INTEGRITY: THE 11 GE POLICIES

 

Working With Customers & Suppliers

     Page   

Includes those policies that guide conduct when buying or selling products, materials, resources, etc.

  

•   Ethical Business Practices

     4   

•   Following International Trade Controls

     4   

•   Supplier Relationships

     5   

Government Business

  

Includes the policy that specifically applies to government contracts and interactions with government officials.

  

•   Working With Government Agencies

     5   

Fair Competition

  

Focuseson antitrust laws.

  

•   Complying With Antitrust Laws

     6   

While In The GE Assignment

  

Spells out those policies that affect the work environment and responsibilities to the community.

  

•   Health, Safety & Environmental Protection

     7   

•   Participation in Hazardous Business

     7   

Personal Integrity

  

Addresses those personal, day-to-day activities that have an impact on work integrity.

  

•   Avoiding Conflicts of Interest

     8   

•   Financial Controls and Records

     8   

•   Insider Trading & Stock Tipping

     9   

•   Equal Employment Opportunity

     9   

Proprietary and Confidential Information

     10   

How To Handle An Integrity Concern

     11   

The Acknowledgment

     11   

Integrity Helplines

     12   

 

Schedule I    I - 3    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

ETHICAL BUSINESS PRACTICES (POLICY 20.4)

 

    Never offer, give, or accept bribes or kickbacks.

 

    Use good judgment to avoid even the appearance of an improper payment.

 

    GE hires only reputable firms and representatives.

 

    No more than ordinary and reasonable entertainment or business courtesies.

 

    No contributions to political parties or candidates on behalf of GE.

Who Should Be Particularly Aware Of The Policy?

 

    Individuals who represent the company before customers or the government.

 

    Individuals who work with sales reps, agents or represent GE in any way.

 

 

FOLLOWING INTERNATIONAL TRADE CONTROLS

 

    If the duties you perform for GE involve international business, learn and follow the laws that govern international trade.

 

    Do not participate in transactions, including services, prohibited by U.S. law.

Who Should Be Particularly Aware Of The Policy?

 

    Individuals who are involved in international activities.

 

Schedule I    I - 4    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

SUPPLIER RELATIONSHIPS

 

    Be lawful, fair and efficient in all supplier relationships.

 

    Safeguard any information GE holds as confidential or proprietary.

 

    Respect licensing agreements and copyright laws, including those covering computer software.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals with direct supplier contact.

 

 

WORKING WITH U.S. AND NON- U.S. GOVERNMENT AGENCIES

 

    Maintain the highest standards of honesty in all contacts with government representatives.

 

    Avoid even the appearance of improper conduct in dealing with government representatives.

 

    Whenever the government is the customer, follow detailed laws and procedures that regulate every stage of the work.

 

    Even if the government is not the customer, individuals must be truthful and accurate in all communications with government representatives.

Who Should Be Particularly Aware Of The Policy?

 

    Any individual who comes in contact with government officials or works on government contracts.

 

    Any individual who works in a government-regulated industry or business.

 

Schedule I    I - 5    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

COMPLYING WITH THE ANTITRUST LAWS

 

    Never discuss prices, costs, profit margins or other competitive topics with a representative of a GE competitor; or propose or make an agreement with a competitor relating to any aspect of the competition, without prior approval of GE counsel.

 

    Avoid creating the appearance of improper agreements or understandings. Keep communications with competitors to a minimum. Make sure there is legitimate business reason for all such communications.

 

    Never propose or enter into any agreements or understandings with GE customers restricting prices or terms for resale of GE products.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals are responsible for complying with the antitrust laws and this policy.

 

    If your job involves contacts with competitors, setting prices or other terms or conditions of sale, marketing, purchasing, participating in trade associations or standards-setting groups, working on acquisitions, divestitures or joint ventures, you should have a detailed familiarity with the policy and with the GE business component’s guidelines relating to antitrust and competitive contacts.

 

Schedule I    I - 6    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

HEALTH, SAFETY AND ENVIRONMENTAL PROTECTION

 

    Comply with all applicable environmental, health and safety laws and regulations.

 

    Create and maintain a safe working environment.

 

    Prevent work-related injuries.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals.

 

 

PARTICIPATION IN HAZARDOUS BUSINESS

 

    Hazardous business is only entered / continued if risks can be controlled and interests of the public and GE are served.

Who Should Be Particularly Aware Of The Policy?

 

    Those who have any contact with or knowledge of this type of material or process.

 

Schedule I    I - 7    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

AVOIDING CONFLICTS OF INTEREST

 

    Avoid any activities or relationships that could conflict or appear to conflict with your work on your GE assignment.

 

    Don’t use GE resources as part of your outside activities.

 

    Don’t discredit GE’s name or reputation.

 

    If you are an officer or director with a non-GE business and you could influence GE’s dealings with that business, you must bring it to GE’s attention.

 

    If a potential conflict of interest involves you, report it in writing to your primary GE contact.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals.

 

 

FINANCIAL CONTROLS AND RECORDS

 

    Follow all GE accounting, reporting and control procedures relating to your GE assignment.

 

    Keep and report your time records and other GE records in an accurate, timely, complete and confidential manner.

 

    Protect the security of company assets and the confidentiality of company information. Do not release GE records outside the company unless specifically authorized by GE management.

 

    Allow company auditors access to records you maintain while on your GE assignment.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals.

 

Schedule I    I - 8    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

INSIDER TRADING AND STOCK TIPPING

 

    Never buy, sell, or suggest that someone else buy or sell any company’s stock or other securities while you are aware of inside information about that company’s business.

“Inside information” is defined as:

 

    Information that is material (i.e., a reasonable investor might consider it important in deciding whether to buy or sell a security).

 

    Information that is non-public (i.e., it has not been reported in the media and investors have not had access to it).

Assume that information is “inside information” if it is non-public and it would affect in any way your own consideration of whether to buy or sell the security in question.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals.

 

    Individuals with early access to market-sensitive information (contract awards or acquisitions, for example).

 

 

EQUAL EMPLOYMENT OPPORTUNITY

 

    Extend equal treatment to all individuals without regard to race, color, religion, national origin, sex, age, disability, veteran status or other characteristics protected by law.

 

    Maintain a work environment free of harassment of any kind, including sexual harassment. Sexual harassment is prohibited under this policy.

Who Should Be Particularly Aware Of The Policy?

 

    All individuals.

 

Schedule I    I - 9    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

PROPRIETARY AND CONFIDENTIAL INFORMATION

 

    Don’t publish or disclose (except as your GE assignment may require) confidential or proprietary information or data of GE, or of others which GE is obligated to keep confidential.

 

    Information, ideas, or inventions made or conceived while on a GE assignment are the property of GE.

 

    At the end of your assignment, deliver promptly all items belonging to GE, including materials of a proprietary or confidential nature.

 

    If you are unsure of what is considered proprietary or confidential, ask your primary GE contact for clarification.

If you have an individual contract or consulting agreement with GE, you may have further obligations concerning proprietary or confidential information.

 

Schedule I    I - 10    RCSI / First Data Confidential


Final Execution Version

COMMITMENT TO INTEGRITY

 

HOW TO HANDLE AN INTEGRITY CONCERN

If you suspect that there has been a violation of law or of GE policy, report it promptly:

 

    Get the information to define your concern (who, what, when, where).

 

    Raise the concern with your primary GE contact, the GE Business Integrity Helpline (see list on Page 12), or the GE Corporate Ombudsperson at 1-800-227-5003.

Note:

    You may report anonymously. The important thing is not to let a concern be swept under the rug.

 

    GE policy forbids retribution against any person for reporting or supplying information about an integrity or compliance concern.

 

 

THE ACKNOWLEDGMENT

YOUR PERSONAL COMMITMENT TO INTEGRITY

 

    Your signature means that you:

 

    received this document on GE policies;

 

    understand that compliance is every individual’s responsibility;

 

    agree not to misuse proprietary or confidential information; and

 

    agree to report concerns to the GE Business Integrity Helpline or the GE Corporate Ombudsperson, or ask questions if you would like further information regarding the policies.

 

Schedule I    I - 11    RCSI / First Data Confidential


Final Execution Version

INTEGRITY HELPLINES

 

GE Business Integrity Helplines

 

Business    Toll-Free Number
GE CORPORATE    800 227-5003
GE AIRCRAFT ENGINES    800 443-3632
GE APPLIANCES    800 925-9559
GE CAPITAL    800 882-4322
GE INDUSTRIAL SYSTEMS – PLAINVILLE    800 831-9236
GE INDUSTRIAL SYSTEMS – FT. WAYNE    800 831-9508
GE INFORMATION SERVICES    800 257-8832
GE LIGHTING    800 257-8929
GE MEDICAL SYSTEMS    800 438-8072
GE PLASTICS    800 643-1614
GE POWER SYSTEMS    800 443-1391
GE SUPPLY    800 952-8639
GE TRANSPORTATION SYSTEMS    800 682-5845
NBC    800 622-6221

If you need a direct dial number for a GE Business Integrity Helpline, contact the GE Ombudsperson’s Office at 1-800-227-5003 or (203) 373-2343.

 

Schedule I    I - 12    RCSI / First Data Confidential


Final Execution Version

ACKNOWLEDGMENT FOR GE SERVICE PROVIDERS

 

I hereby acknowledge that I have received the document entitled: “Commitment to Integrity; Your Responsibilities While On A GE Assignment.” I understand that I am required to comply with the policies described herewith while on assignment at General Electric Company or any affiliate thereof (hereafter “GE”).

Also, in consideration of my assignment at GE, I agree not to use, publish or otherwise disclose to anyone (except as my GE assignment may require), either during or after my assignment at GE, any confidential or proprietary information or data of GE, or any information or data of others which GE is obligated to maintain in confidence. I understand that any information, ideas, or inventions made or conceived by me while on my GE assignment are the property of GE.*

At the end of my assignment I agree to deliver to GE promptly all items which belong to GE, including, without limitation, all written and other materials which are of a confidential or a proprietary nature relating to the business of GE.

I understand that if I am unsure what information is considered proprietary or confidential, or if I am unsure of my obligations under this agreement, I will ask my primary GE contact for clarification.

I agree to report any policy concerns to the GE Business Integrity Helpline or to the GE Corporate Ombudsperson.

I confirm that I have no agreements with or obligations to others in conflict with the above.

 

 

     

 

Signature       Date

 

     

 

Name       GE Assignment Location (City, State)

 

     

 

Witness       Date

 

* If you have an individual contract / consulting agreement with the Company, you may have further obligations. Please refer to your individual Agreement for specific details.

Please remit to your agency or (if none) your primary GE contact.

 

Schedule I    I - 13    RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE X

MISCELLANEOUS PROVISIONS

 

1 INTRODUCTION

The provisions set forth in this Schedule X are miscellaneous provisions that apply under this Agreement. The provisions apply to only the specific portion of the Production Services described unless otherwise indicated in a particular section.

 

2 LIST OF EXHIBITS

The following Exhibits are attached to this Schedule X:

 

  (a) Exhibit X-1 (General Provisions)

 

  (b) Exhibit X-2 (PayPass Plastics Services Provisions)

 

  (c) Exhibit X-3 (Digital Card Print Services Provisions)

 

  (d) Exhibit X-4 (Plasticard Expedited Turnaround Provisions)

 

  (e) Exhibit X-5 (Certified Mail Provisions)

 

  (f) Exhibit X-6 (Canadian Data Privacy Provisions)

 

  (g) Exhibit X-7 (Obligation to Minimize Financial Rewards Losses)

 

Schedule X    X-1    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT X-1

GENERAL PROVISIONS

 

1.1 GENERAL

The following provisions apply to the Production Services generally.

 

1.2 RCSI ONSITE EMPLOYEE SPECIFIC PROVISION

First Data agrees to the following understanding and agreement whereby a RCSI Operations Manager (“RCSI Onsite Employee”) will be located onsite at the following First Data location: 805 Crown Point Ave.

 

  (a) The RCSI Onsite Employee shall follow First Data’s work schedule, holiday schedule, work rules and security regulations. In addition, upon First Data’s request at any time during the Term of this Agreement, RCSI shall conduct Background Checks in accordance with Section 5.2(b) of this Agreement on the same basis as for First Data employees.

 

  (b) Access:

 

  (i) The RCSI Onsite Employee will be issued a badge that will allow him/her into the Crown Point Facility (administrative area) during normal First Data business hours.

 

  (ii) If the RCSI Onsite Employee desires access to the Crown Point Facility (administrative area) outside normal First Data business hours, RCSI must obtain written consent from the First Data customer operations service team.

 

  (iii) The RCSI Onsite Employee may request access, through the First Data customer operations service team, to other First Data facilities if such request is reasonable and specifically relates to RCSI’s production work. The First Data customer operations service team has the sole right to deny access.

 

  (iv) If the RCSI Onsite Employee is granted access by the First Data customer operations service team to any First Data production area (Crown Point Facility or other), he/she shall be escorted by First Data at all times.

 

  (v) The RCSI Onsite Employee shall request access to conference rooms (with a conference telephone) through the First Data customer operations service team.

 

  (c) Office and Equipment:

 

  (i) First Data will, based on availability, provide the RCSI Onsite Employee with an office. The RCSI Onsite Employee will keep the office door closed when sensitive First Data meetings or visits are taking place.

 

Exhibit X-1    X-1 - 1    RCSI / First Data Confidential


  (ii) RCSI will provide a PC for the RSCI Onsite Employee. First Data will provide the RSCI Onsite Employee with DSL access or high speed internet access equivalent.

 

  (iii) First Data will provide the RCSI Onsite Employee with a telephone with local and long distance service. First Data will also provide an additional multi-purpose telephone line for equipment (printer/ scanner/ fax). Such equipment will be provided by RCSI.

 

  (d) Interaction:

 

  (i) The First Data customer operations service team shall be the RCSI Onsite Employee’s primary First Data contact.

 

  (ii) First Data shall provide the RCSI Onsite Employee with First Data email and Sametime access.

 

  (e) The RCSI Onsite Employee will not have production related conversations with First Data supervisors, operators or associates.

 

Exhibit X-1    X-1 - 2    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT X-2

PAYPASS PLASTICS SERVICES

 

1.1 GENERAL

The provisions set forth in this Exhibit X-2 apply only to the services set forth in Section 4.3 of Schedule A to this Agreement regarding PayPass Plastics services.

 

1.2 PAYPASS PLASTICS SERVICES SPECIFIC PROVISIONS

 

  (a) Indemnification.

For purposes of the PayPass Plastics Services, the Parties hereby agree as follows:

 

  (i) RCSI and First Data shall each separately obtain from MasterCard the PayPass Specifications and documentation, technical manuals, code and other related materials (collectively, the “PayPass Specifications and Related Materials”). Each Party will work with MasterCard to obtain support and updates and to ensure the PayPass Plastics Services are offered pursuant to the most current version of the PayPass Specifications and Related Materials.

 

  (ii) Notwithstanding anything in Section 15.2 of this Agreement to the contrary, and subject to the provisions of (ii)(1)(A) and (B), below, RCSI agrees to indemnify and hold harmless First Data and its Affiliates, and their respective officers, directors, employees, agents, successors and assigns from any Losses and threatened Losses, arising from, in connection with or based on allegations of, any claims of infringement of any patent alleged to have occurred because of First Data’s use of the PayPass Specifications and Related Materials and any other designs, instructions or specifications provided in writing by RCSI to First Data relating to the PayPass Plastics Services.

 

  (1) RCSI shall not be obligated to defend or hold harmless or otherwise be liable under this Section 1.2(a)(ii) to the extent such infringement would not have occurred but for either: (A) First Data’s failure to comply with the PayPass Specifications and Related Materials, or the instructions, designs or other specifications provided by RCSI in connection with First Data’s performance of the PayPass Plastics Services; or (B) First Data’s deviation from systems, processes or components approved by RCSI for performance of the PayPass Plastics Services.

 

  (2) RCSI shall have no obligations under this Section (ii) unless First Data (A) promptly notifies RCSI at such time as it is apprised of any third-party claim, (B) agrees to give full and complete authority, information and assistance for the defense and disposition of such claim.

 

Exhibit X-2    X-2 - 1    RCSI / First Data Confidential


Final Execution Version

 

 

  (3) If a Loss or threatened Loss under this Section 1.2(a)(ii) occurs, or in RCSI’s reasonable opinion is likely to occur, RCSI, in addition to indemnifying First Data, shall be entitled to but not obligated, at its own expense and at its option, to (A) procure the rights necessary to allow First Data to continue providing the PayPass Plastics Services, or (B) provide reasonable specifications or instructions to replace, modify, or terminate the PayPass Plastics Services such that they become noninfringing.

 

  (iii) For avoidance of doubt, except as set forth in subsection (iv), below, First Data’s indemnification of RCSI pursuant to Section 15.1 of this Agreement shall in no event be deemed to include any Losses or threatened Losses arising from, in connection with, or based on allegations of, any claims of infringement of any patent, trade secret, copyright or other proprietary rights, alleged to have occurred because of the use of the PayPass Specifications and Related Materials, and any other designs, instructions or specifications provided by RCSI to First Data relating to the PayPass Plastics Services.

 

  (iv) First Data agrees to indemnify, defend and hold harmless RCSI and its Affiliates and their respective officers, directors, employees, agents, successors and assigns from any Losses and threatened Losses, arising from, in connection with or based on allegations of, any claims of infringement of any patent to the extent such claim arises because of:

 

  (1) First Data’s failure to comply with the PayPass Specifications and Related Materials, or the instructions, designs or other specifications provided by RCSI in connection with First Data’s performance of the PayPass Plastics Services; or

 

  (2) First Data’s deviation from systems, processes or components approved by RCSI for performance of the PayPass Plastics Services.

 

  (v) The indemnification obligations set forth in subsections 4(b)(ii) and (iv), above, shall be considered to be additional obligations of the Parties under Sections 15.1(b) and 15.2(b) of this Agreement, as applicable, and, pursuant to Section 16.2(c)(ii) of this Agreement, the limitations set forth in Section 16.2(b) of this Agreement shall not apply to such indemnification obligations.

 

Exhibit X-2    X-2 - 2    RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT X-3

DIGITAL CARD PRINT SERVICES PROVISIONS

 

1.1 General

The provisions set forth in this Exhibit X-3 apply only to Section 4.6 of Schedule A to this Agreement regarding Digital Card Print Services.

 

1.2 Digital Card Print Services Specific Provisions

 

  (a) RCSI understands and agrees that RCSI is solely responsible for, and that First Data assumes no responsibility of any type or kind for, any images or marks submitted to First Data by RCSI, RCSI’s Cardholders, or such third party contracted by RCSI for use in connection with the Digital Card Print Services, including but not limited to (i) reviewing such images and marks for appropriateness of content and (ii) securing and maintaining any required licenses or other usage rights from or with any third parties in any intellectual property incorporated into or related to such images or marks.

 

  (b) RCSI represents and warrants to First Data that RCSI has obtained all necessary rights for First Data to use, reproduce, distribute and prepare derivative works of the images and marks for purposes of performing the Digital Card Print Services. Furthermore, RCSI shall defend, indemnify and hold First Data harmless against any claim or action against First Data arising from or with respect to any breach of the foregoing representation and warranty, including but not limited to any claim or allegation that First Data’s use, reproduction, distribution or preparation of derivative works of the images and marks in connection with the Digital Card Print Services (i) infringes any third party patent, copyright, trade secret, trademark or trade dress; (ii) violate third party rights of privacy, publicity, defamation, confidentiality or moral rights; or (iii) violate any other third party proprietary right; provided, however, that RCSI’s obligations set forth in this sentence shall not apply to the extent that the claim or allegation is caused by (a) the reproduction by First Data of the digital images or marks in a way which varies from the images or marks submitted by RCSI or a third party contracted by RCSI for this purpose or (b) First Data’s use of the software, systems or other resources necessary to implement the Digital Card Print Services or First Data’s deviation from the detailed business or technical specifications required to implement the Digital Card Print Services.

 

  (c) For purposes of the Liability Restrictions set forth in Section 16.2 of this Agreement, RCSI’s indemnification for a breach by RCSI of the foregoing representation and warranty shall be deemed to be included under the terms of Section 15.2(b) of this Agreement. Notwithstanding anything in this paragraph to the contrary, RCSI agrees that First Data shall have the right, upon mutual agreement of the Parties, to reject any images or marks submitted by RCSI, RCSI’s Cardholders, or such third party contracted by RCSI in connection with the Digital Card Print Services which First Data reasonably believes to contain any inappropriate or infringing content.

 

Exhibit X-3    X-3 - 1    RCSI / First Data Confidential


Final Execution Version

 

 

  (d) RCSI and First Data hereby agree that, except as otherwise specified in this Exhibit X-3, the Digital Card Print Services set forth in this Agreement shall not affect First Data’s obligation to meet all Service Levels. In the event that the volume of RCSI’s plastics receiving Digital Card Print Services hereunder should, for any day, exceed eight thousand (8,000), then to the extent that a delay in First Data’s ability to meet any affected Service Level results from such excess in the volume of plastics receiving Digital Card Print Services, such delay shall be deemed excused and no remedy (either monetary or otherwise) shall apply with respect to such delay for only those volumes, greater than 8,000 for any day (e.g., if the volume of plastics receiving Digital Card Print Services in a day is 10,000, First Data’s failure to meet any affected Service Level would be deemed excused only as to the additional 2,000 plastics above the first 5,000). In addition, in the event the average daily volume of RCSI’s plastics receiving Digital Card Print Services hereunder for any two consecutive months exceeds eight thousand (8,000), then First Data and RCSI agree to (a) review and discuss, in good faith, a reduction in the fees for billing elements 7642 and 7797 from the price schedule set forth in Schedule C and (b) negotiate, in good faith, a new threshold, higher than the eight thousand (8,000) cards per day set forth above, for purposes of. determining implications of not meeting applicable Service Levels. Any mutually agreed upon change to the items in (a) and (b) of the preceding sentence will be made in writing by the Parties.

 

Exhibit X-3    X-3 - 2    RCSI / First Data Confidential


Final Execution Version

EXHIBIT X-4

***PLASTICARD EXPEDITED TURNAROUND

 

1.1 General

The provisions set forth in this Exhibit X-4 apply only to the Billing Element number 7640 for PlastiCard expedited turnaround services as set forth in Exhibit C-4 of Schedule C to this Agreement.

 

1.2 PlastiCard Expedited Turnaround Specific Provisions

 

  (a) As of the Effective Date, the PlastiCard expedited service applies only to the *** PLCC and Dual Card portfolios. If RCSI wants other portfolios to receive this service, First Data and RCSI will discuss and agree on terms.

 

  (b) RCSI may discontinue this billing element and service at its discretion, at any time for any or no reason, with thirty (30) days’ written notice to First Data.

 

  (c) This PlastiCard expedited service and the related incremental fee do not apply to mass reissues and natural reissues.

 

  (d) For those *** Transaction Cards and Transaction Card Packages not mailed within one (1) Business Day, First Data will provide an explanation in writing defining why the *** Transaction Card or Transaction Card Package was not produced and mailed in accordance with this Service Level.

 

  (e) Any volume increase of greater than 125% of the rolling three month average of ***‘s daily volume will require a 75 calendar day written notice from RCSI to First Data. If the notice is not provided, the Service Level Credit regarding timeliness for the volume greater than the 25% overage will be waived. By way of example, if the 90-day rolling average daily volume is 2,000 plastics per day and First Data receives embossing files from RCSl calling for 2,700 plastics on a specific day without the 75 calendar day notice, then the first 2,500 plastics are required to be embossed, inserted into complete card packages and mailed the same day that the embossing files were received by First Data. First Data would provide best efforts to emboss and mail the remaining 200 plastics (the overage), however, no Service Level Credit would apply if those 200 plastics were not embossed and mailed same day.

 

  (f) The Plastic Processing Timelines are attached to this Exhibit X-4 as Attachment X-4-1.

 

 

Exhibit X-4   X-4-1   RCSI / First Data Confidential


LOGO

 

Exhibit X-4-1

***– FDR Plastic Processing Timeline

Current process – Replacement Cards (excludes Natural Reissue, MASS & Flips) *

Timeline Example

Window of opportunity Plastic Requested Plastic non mon triggered To reduce to meet Prior to FDR receives file by 2 AM on requirements 6:00 PM EST The 30th

Plastic Trigger Date

Force Emboss Plastic Process Ship Date

10-29-08

10-29-08 Date 10-30-08 W/in 3 days

New process – Replacements Cards (excludes Natural Reissue, MASS & Flips) *

Timeline Example

Plastic Requested Plastic non mon triggered PCF Tape 016 –Prior to FDR receives file by 2 AM on Plastic send day 0 6:00 PM EST The 30th

Force Emboss Plastic Trigger Date Plastic Process Ship Date =

10-29-08 10-29-08 Date 10-30-08 10-30-08

* Notes:

- Saturday is a non-processing day. If day 2 is Saturday, it will move to Sunday.

- Output files received on Sunday or Holidays will be mailed the next business day.

- Process 100% of all *** volume under new tape id 016 – PCF Service subject Section CI FC DO.

- Based on transaction type and tape ID (will exclude natural reissue transaction type) will drive to the 0 day processing for plastic.

Process Controls:

- GE Daily Embossing Pact Brio cycle time report and Month End Plastics Performance Report used to measure performance

- Site visits for process review to be scheduled through RCSI Contract Executive


LOGO

 

Exhibit X-4-1

***– FDR Plastic Processing Timeline

Current process – New Accounts *

Timeline Example

Window of opportunity

Plastic non mon triggered

Application

To reduce to meet

FDR receives file by 2 AM on

Cut-off Time is 2 Day PCF Process requirements

6:00 PM EST

for New Accts The 30th

Plastic Trigger Date

Open Date Plastic Process Ship Date

10-29-08

10-27-08 Date 10-30-08 W/in 3 days

(2 Day PCF)

New process – New Accounts *

Timeline Example

Plastic non mon triggered PCF Tape 016 –Application 2 Day PCF Process FDR receives file by 2 AM on Plastic send day 0 Cut-off Time is for New Accts 6:00 PM EST The 30th

Plastic Trigger Date

Open Date Plastic Process Ship Date =

10-29-08

10-27-08 Date 10-30-08 10-30-08

(2 Day PCF)

* Notes:

- Saturday is a non-processing day. If day 2 is Saturday, it will move to Sunday.

- Output files received on Sunday or Holidays will be mailed the next business day.

- Process 100% of all *** volume under new tape id 016 – PCF Service subject Section CI FC DO.

- Based on transaction type and tape ID (will exclude natural reissue transaction type) will drive to the 0 day processing for plastic.

Process Controls:

- GE Daily Embossing Pact Brio Cycle Time report and Month End Plastics Performance Report used to measure performance

- Site visits for process review to be scheduled through RCSI Contract Executive


Final Execution Version

EXHIBIT X-5

CERTIFIED MAIL PROVISION

Regarding Certified Mail (billing element 7211), the Parties agree that:

 

1. To the extent that RCSI generates a minimum of *** certified collection Letters in any given calendar month, the price of billing element 7211 will be reduced from ***/letter to ***/letter. In the event volumes average less than *** per month, calculated during the entire calendar year, a true-up will be completed at the end of the calendar year by assessing a charge for the difference between *** Letters and the volumes actually billed at the rate of ***/letter. For purposes of example, if RCSI produces *** Letters for the calendar year (***/mo), First Data will assess a charge of *** [(*** – ***) x ***] on the next invoice following year-end.

 

2. At least *** of the daily certified letter volume will be produced and mailed the same day that the certified letter production file is received by First Data; and

 

3. *** of the daily certified letter volume will be produced and mailed within two (2) Business Days of the date the daily certified letter production file is received by First Data.

 

 

Exhibit X-5   X-5-1   RCSI / First Data Confidential


Final Execution Version

EXHIBIT X-6

CANADIAN REGULATORY AND DATA PRIVACY TERMS

The following provisions shall apply only to the extent that Production Services are provided to, or for the benefit of, an Affiliate of RCSI that is regulated by Guideline B-10 (“B-10”) of Canada’s Office of the Superintendent of Financial Institutions (“OSFI”) (each such regulated entity, a “Regulated Affiliate”) and in such case, references to RCSI in the Agreement shall be interpreted to include the Regulated Affiliate.

 

I. Generally

 

  A. The Production Services provided to the Regulated Affiliate are provided as of the Execution Date by First Data primarily from the locations set forth in Schedule F to the Agreement.

 

  B. At any time during the Term, at RCSI’s request, First Data shall provide RCSI with access to any RCSI equipment, furnishings and fixtures, including routers, within First Data’s control, and when such property is no longer required for the performance of the Production Services, at RCSI’s request, First Data shall return such property to RCSI.”

 

  C. First Data shall promptly give RCSI notice of an event affecting First Data or any permitted Subcontractor which First Data reasonably believes may have a material adverse effect on First Data’s ability to comply with any of its obligations under this Agreement.

 

  D. For the purposes of this Section I.D, “Material Subcontractor” means a subcontractor that has been *** in accordance with this Agreement, and that: (i) is not a public company filing publicly available financial statements; (ii) is performing a material part of the Production Services; (iii) is performing such Production Services in respect of a Regulated Affiliate; and (iv) is performing Production Services which, should the Material Subcontractor become unable to perform, First Data would not be able to transfer to another Material Subcontractor *** in accordance with this Agreement, or provide itself, on a reasonably prompt basis and otherwise without a material adverse effect on the continuing operations of the Regulated Affiliate. First Data shall use commercially reasonable efforts to cause any Material Subcontractor, within 120 days of the last day of each financial year end of that Material Subcontractor that occurs during the term of this Agreement, to provide RCSI with (or with access to) audited consolidated financial statements consisting of a balance sheet, a statement of income and a statement of cash flows, prepared in accordance with U.S. GAAP (the “Financial Statements”). RCSI’s use of the Financial Statements shall be strictly limited to the fulfillment by it of its obligations pertaining to the annual monitoring of the Material Subcontractor’s financial strength as required by OSFI or any similar requirements by any other governmental or regulatory authority.

 

  E. The references to “regulators,” in Section 8 of the Agreement shall be deemed to include OSFI.

 

 

Exhibit X-6   X-6-1   RCSI / First Data Confidential


Final Execution Version

 

  F. The following is hereby added to the end of Section 8.2(b) of the Agreement:

“First Data shall permit such auditors, inspectors, regulators (including OSFI) and representatives to access and make copies of any internal audit reports (and associated working papers and recommendations) prepared by or for First Data in respect of the Production Services being performed for RCSI, and to access findings in the external audit of First Data (and associated working papers and recommendations) that address the Production Services being performed for RCSI, all subject to confidentiality documentation being signed that is satisfactory in form and content to First Data, its external auditors, and the receiving party.”

 

  G. The following is hereby added as Section 8.8 of the Agreement:

“RCSI may provide OSFI with access to records under this Agreement, including those records referred to in Sections 243 and 244 of the Trust and Loan Companies Act (Canada), from facilities of RCSI or RCSI Affiliates in Canada.”

 

  H. The following is hereby added as Section 18.8 of the Agreement:

“If OSFI takes control or possession of the Regulated Affiliate, First Data shall continue to provide the Production Services under and in accordance with this Agreement so long as RCSI shall continue to meet its obligations to pay under and in accordance with this Agreement.”

 

  I. At RCSI’s request, First Data, at a reasonable time and in accordance with the disaster recovery plan, shall promptly provide to RCSI access to all records in First Data’s possession or control (or in the possession or control of its subcontractors) relating to this Agreement, including all RCSI Data, RCSI Information and RCSI Customer Information and all other data or records of RCSI or First Data reasonably necessary to allow RCSI to: (i) sustain business operations; or (ii) meet its statutory obligations. In addition, at the request of RCSI or OSFI, First Data shall immediately provide all information required by OSFI in accordance with OSFI’s legislative mandate, if First Data is unable to continue to provide any Service in the manner required pursuant to this Agreement.

 

II. Canadian Privacy Law

If Production Services being provided by First Data are subject to Canada’s Personal Information Protection and Electronic Documents Act or other Canadian federal or provincial legislation deemed to be substantially similar (“Canadian Privacy Law”) applies, then this Section II shall apply in addition to and not in limitation of, First Data’s other obligations of confidentiality and non-disclosure under this Agreement. In the event of a conflict between the other provisions of this Agreement and this Section II, the requirements of this Section II will prevail. Where Section 12.7 of the Agreement is referred to in this Section II, obligations with respect to the GLB Act shall be interpreted as obligations in respect of Canadian Privacy Law.

 

  A. First Data shall collect, use, store, disclose, dispose of and otherwise handle RCSI Customer Information in accordance with all RCSI regulations and policies described in this Section II of this Agreement and other mutually agreed upon information security practices, including those described in Sections 12.7 of this Agreement.

 

 

Exhibit X-6   X-6-2   RCSI / First Data Confidential


Final Execution Version

 

  B. If RCSI is dependent on the performance by First Data of an obligation in order for RCSI to comply with any Canadian Privacy Law, then, at RCSI’s reasonable request, First Data shall perform such obligation in a manner that shall enable RCSI to comply with such Canadian Privacy Law.

 

  C. Without limiting Section 12, except as required by applicable law, First Data shall not disclose, provide access to, or otherwise make available to any person RCSI Customer Information under the care or control of, or accessible by, First Data, without RCSI’s prior consent, except as permitted by Section 12 of this Agreement. If First Data is required to disclose RCSI Customer Information in connection with any judicial proceeding or government investigation, then First Data shall, to the extent permitted by applicable law, advise RCSI promptly and prior to making such disclosure in order that RCSI may interpose an objection to such disclosure, take action to assure confidential handling of the RCSI Customer Information, or take such other action as it deems appropriate to protect the RCSI Confidential Information. First Data shall also comply with the provisions of Section 12 of this Agreement, where applicable. Thereafter, First Data may disclose RCSI Customer Information but only to the extent required by applicable law and subject to any applicable protective order.

 

  D. First Data shall collect, use, store, disclose, dispose of and otherwise handle RCSI Customer Information solely for the purpose of performing the Production Services.

 

  E. First Data shall refer to RCSI all requests for access to RCSI Customer Information and shall respond to any such request only by making reference to such referral. If RCSI is required by any Canadian Privacy Law to provide RCSI Customer Information that is in First Data’s possession or control to an individual, at RCSI’s request, and provided that RCSI has provided First Data with reasonable prior notice, First Data shall provide (or provide a mechanism for RCSI to provide) such RCSI Customer Information and shall meet any reasonable deadlines imposed by RCSI for such provision required to enable RCSI to comply with any deadlines applicable under such Canadian Privacy Law to the provision of such RCSI Customer Information. In addition, at RCSI’s request, First Data shall accept and process updates (including corrections or deletions) to RCSI Customer Information in the ordinary course of providing the Production Services as detailed in this Agreement, including Schedule A (Production Services) hereto, within ten days from the date upon which the request therefor is made by RCSI.

 

 

Exhibit X-6   X-6-3   RCSI / First Data Confidential


Final Execution Version

 

  F. First Data shall store and protect RCSI Customer Information from loss, theft, unauthorized access, copying, modification, use or disclosure during utilization, transmission and storage using technology, physical protection measures, processes and standards of practice that are consistent with industry accepted best practices used or observed by comparable suppliers of similar services for the financial services industry in North America, including those measures, processes or standards set forth in Section 12 of this Agreement. In the event any loss, theft or unauthorized access, copying, modification, use or disclosure occurs, First Data shall promptly notify RCSI of the nature and details of such loss, theft or unauthorized access, copying, modification, use or disclosure, and shall promptly take action and co-operate as set forth in Section 12 of this Agreement.

 

  G. First Data shall reasonably cooperate and comply with any requests or instructions issued by any privacy or data protection authority, including the Canadian Privacy Commissioner and any other governmental or regulatory authority applicable to RCSI or RCSI Customer Information.

 

  H. Upon completion of First Data’s required use of RCSI Customer Information, or upon RCSI’s written request, as further described in Section 12.1(b) and 12.5(d)(ii) of this Agreement, First Data shall return or destroy all RCSI Customer Information in accordance with RCSI’s instructions. If RCSI requests the destruction of any RCSI Customer Information, then First Data shall complete the destruction as requested and provide RCSI with written confirmation of the actions taken within a reasonable period of time from receipt of RCSI’s written instructions.

 

  I. First Data and RCSI shall mutually agree on a designated employee of First Data who shall be responsible for administering and ensuring compliance with all aspects of this Agreement, including compliance by First Data and its subcontractors with Canadian Privacy Law and this Schedule X-6.

 

  J. The definition of Non-Public Personal Information provided in Section 12.7 of the Agreement is hereby amended to add after the definition of GLB Act” the words “or information deemed to be personal information pursuant to Canadian Privacy Law”.

 

 

Exhibit X-6   X-6-4   RCSI / First Data Confidential


Final Execution Version

 

EXHIBIT X-7

OBLIGATION TO MINIMIZE FINANCIAL REWARDS LOSSES

The Parties will work together on process improvements to reduce and mitigate the risk of damages to RCSI’s program clients and First Data from financial rewards including coupons, gift cards and certificates.

 

Exhibit X-7    X-7 - 1    RCSI / First Data Confidential


Final Execution Version

 

SCHEDULE Y

CONCORDANCE

This concordance is provided for the convenience of the Parties and does not form a part of the Agreement.

 

Defined Term

  

Defined

  

Primary Use Location

2 Day SLA

   Section 4.6(b)(i)    Schedule B

ABC/Offline Letter

   Section 2.1(a)    Schedule B

Account

   Section 1.2(a)(i)    Schedule A

Active Collateral

   Section 1.2(a)(ii)    Schedule A

Affiliate

   Section 2.1(a)    PSA

Aggregate RCSI Savings

   Section 9.7(e)(ii)    Schedule C

Agreement

   Preamble    PSA

***

   Section 1.2(c)    Exhibit C-7

***

   Section 1.2(b)    Exhibit C-7

Amount at Risk for Plastics Production Services

   Section 2.1(c)    Schedule B

Amount at Risk for Print Production Services

   Section 2.1(b)    Schedule B

Ancillary Services

   Exhibit C-4    Exhibit C-4

Annual Plan

   Section 7.3(a)(ii)(C)    PSA

Asset Purchase Agreement

   Section 2.1(c)    PSA

Automatic Rush Embossing

   Section 1.2(a)(iii)    Schedule A

B-10

   Introduction    Exhibit X-6

Background Checks

   Section 5.2(b)    PSA

 

 

Schedule Y    Y - 1    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Basic Bundled SCS Statement and Letter Services

   Section 3.2(e)    Schedule A

Basic Bundled SCS Statement Services

   Section 3.2(d)    Schedule A

Basic Production Services for Embossing

   Section 1.2(a)(v)    Schedule A

Basic Production Services for Statements and Letters

   Section 1.2(a)(vi)    Schedule A

Basic Production Services

   Section 1.2(a)(iv)    Schedule A

Best Practices

   Section 7.7(a)    PSA

BRC

   Section 2.1(d)    Schedule B

Business Day(s)

   Section 2.1(e)    Schedule B

Canadian Privacy Law

   Section II    Exhibit X-6

Card Carrier

   Section 1.2(a)(viii)    Schedule A

Card Cycle Time

   Section I(A)(1)    Exhibit B-1

Cardholder

   Section 1.2(a)(ix)    Schedule A

Category Amount

   Section 3.8(d)    Schedule C

Change

   Section 7.5(b)(i)    PSA

Change Control Procedure

   Section 2.1(e) and Section 7.5(b)(ii)    PSA

Change Order

   Section 2.1(f)    PSA

Check

   Section 1.2(a)(x)    Schedule A

Chip Personalization Services

   Section 1.2(a)(xi)    Schedule A

Commingle

   Section 1.2(a)(xii)    Schedule A

 

 

Schedule Y    Y - 2    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Confidential Information

   Section 12.5(a))    PSA

Consumable Category

   Section 9.7(a)    Schedule C

Consumer

   Section 2.1(f)    Schedule B

Control

   Section 2.1(i)    PSA

Control Chart

   Section 2.1(g)    Schedule B

Correspondence Director Services

   Section 1.2(a)(xiii)    Schedule A

Coupons

   Section 2.1(i)    PSA

CPR

   Section 17.2(a)    PSA

CPI-U

   Section 7    Schedule C

CPI-U Increase

   Section 7    Schedule C

Critical Service Level or CSL

   Section 2.1(h)    Schedule B

Critical Service Level Default

   Section 2.1(i)    Schedule B

Critical To Quality or CTQ

   Section 2.1(j)    Schedule B

Cryptography Services

   Section 1.2(a)(xiv)    Schedule A

Customer

   Section 7.9(a)    PSA

Custom Forms

   Section 9.4    Schedule C

Cycle Schedules

   Section 7.5(a)(iv)    PSA

Daily Letters

   Section I(A)(2)    Exhibit B-1

Dashboard

   Section 2.1(k)    Schedule B

 

 

Schedule Y    Y - 3    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Day 0

   Section I(A)(3)    Exhibit B-1

Day 1

   Section I(A)(4)    Exhibit B-1

Day 2

   Section I(A)(5)    Exhibit B-1

Day 3

   Section I(A)(6)    Exhibit B-1

Day 4

   Section I(A)(7)    Exhibit B-1

Day 5

   Section I(A)(8)    Exhibit B-1

Default Rate

   Section 2.1(k)    PSA

Defect

   Section 2.1(l)    Schedule B

Defective

   Section 2.1(m)    Schedule B

Defects per Million Opportunities or DPMO

   Section 2.1(n)    Schedule B

Digital Card Print Services

   Section 4.6(a)    Schedule A

Digital Card

   Section 1.2(a)(xv    Schedule A

Discount Category

   Section 3.8(b)    Schedule C

Direct Sourcing Election

   Section 9.7(c)(ii)    Schedule C

Disputing Party

   Section 17.2    PSA

Effective Date

   Preamble    PSA

 

 

Schedule Y    Y - 4    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Electronic Statement

   Section 1.2(a)(xvi)    Schedule A

eMessenger Services

   Section 1.2(a)(xvii)    Schedule A

Execution Date

   Preamble    PSA

External Defect

   Section 2.1(o)    Schedule B

Financial Statements

   Section I(D)    Exhibit X-6

First Data

   Preamble    PSA

First Data Confidential Information

   Section 12.5(c)    PSA

First Data Contract Administrator

   Section 5.1(a)(ii)    PSA

First Data Current Charge

   Section 9.7(c)(i)    Schedule C

First Data Data

   Section 2.1(o)    PSA

First Data DecisionQuest Services

   Section 1.2(a)(xviii)    Schedule A

First Data Directed

   Section 9.7(c)(ii)(3)    Schedule C

First Data Equipment

   Section 2.1(p)    PSA

First Data Holidays

   Section 2.1(p)    Schedule B

First Data Information

   Section 2.1(q)    PSA

First Data Personnel

   Section 2.1(r)    PSA

First Data Selected

   Section 9.7(c)(ii)(4)    Schedule C

First Data Software

   Section 2.1(s)    PSA

First Data System

   Section 2.1(t)    PSA

Form Type

   Section 1.2(a)(xiv)    Schedule A

 

 

Schedule Y    Y - 5    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

FTE

   Section 7.3(a)(1)(C)    PSA

Furnishing Party

   Section 12.5(a)    PSA

GE Consumer Finance

   Section 2.1(v)    PSA

GECC

   Section 2.1(u)    PSA

GECOM/Prox/CARMS Portfolio and GECOM/Prox

   Section 2.1(w)    PSA

General and Administrative Costs

   Section 1.3(a)    Exhibit C-7

GLB Act

   Section 2.1(z)    PSA

Hand Emboss Services

   Section 1.2(a)(xx)    Schedule A

Hard Bounce

   Section 3.2(i)(ii)(B)    Schedule A

Headroom

   Section 16.2(d)    PSA

Holds

   Section 2.1(q)    Schedule B

Impacted RCSI Customer Accounts

   Section 4.6(b)(iii)(A)(1)    Schedule B

Imputed Cost

   Section 9.7(b)    Schedule C

in writing

   Section 19.17(c)    PSA

Inactive Collateral

   Section 1.2(a)(xxi)    Schedule A

Including, include and includes

   Section 2.1(y) and Section 19.17(c)    PSA

Indirect Sourcing

   Section 9.7(c)(ii)(1)   

Initial Cure Period for 90% or Less Migration

   Section II(B)(2)(b)    Exhibit A-2

 

 

Schedule Y    Y - 6    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Initial Cure Period for More than 90% Migration

   Section II (B)(1)(a)    Exhibit A-2

Initial Term

   Section 4.1    PSA

IntelliColor Services

   Section 1.2(a)(xxii)    Schedule A

Internal Defect

   Section 2.1(r)    Schedule B

Inventory Management

   Section 3.4(a)(i)    Schedule A

***

   Section I(A)(10)    Exhibit B-1

Key First Data Positions

   Section 5.1(a)    PSA

Key Management Services

   Section 4.3(b)(iii)    Schedule A

Legal Requirements

   Section 6.5(b)    PSA

Letter Cycle Time

   Section I(A)(9)    Exhibit B-1

Letter

   Section 1.2(a)(xxiv)    Schedule A

License Agreement

   Section 2.1(bb)    PSA

Losses

   Section 2.1(cc)    PSA

Lost Fees and Interest

   Section 4.6(b)(ii)(A)(2)    Schedule B

Major Competitor

   Section 2.1(dd)    PSA

Major Release

   Section 2.1(s)    Schedule B

Majority Owned Affiliate

   Section 2.1(ee)    PSA

Manual Rush

   Section 1.2(xxv)    Schedule A

Mass Re-Issue

   Section 4.2(e)    Schedule A

 

 

Schedule Y    Y - 7    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

may

   Section 19.17(c)    PSA

may not

   Section 19.17(c)    PSA

Measurement Period

   Section 2.1(t)    Schedule B

***

   Section 1.2(xxvi)    Schedule A

MICR

   Section 1.2(xxvii)    Schedule A

Monthly Performance Report

   Section 7.3(a)(ii)(B)    PSA

New Cycle Schedules

   Section 7.5(a)(iv)    PSA

New Production Service(s)

   Section 3.7(a)    PSA

Non-Public Personal Information

   Section 12.7(c)    PSA

Notice of Election

   Section 15.5(a)    PSA

Original Agreement

   Section 1.1(a)    PSA

Original Effective Date

   Section 2.1(ii)    PSA

OSFI

   Introduction    Exhibit X-6

Other Correspondence

   Section 1.2(xxviii)    Schedule A

Other Non-USPS Mail Vendor Delivery

   Section 2.1(u)    Schedule B

Outage Cure Period

   Section 6.8(b)    Schedule A

Outage

   Section 6.8(b)(ii)(A)    Schedule A

P.O. Returns

   Section 1.2(xxxv)    Schedule A

PayPass Chip

   Section 1.2(xli)    Schedule A

 

 

Schedule Y    Y - 8    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Paper Statement

   Section 1.2(xxix)    Schedule A

Party and Parties

   Section 2.1(jj)    PSA

Pass-Through Expenses

   Section 2.1(kk)    PSA

PayPass Plastics Services

   Section 1.2(xxx)    Schedule A

PayPass Specifications and Related Materials

   Section 1.2(xxxi)    Schedule A

PEP

   Section 1.2(xxxii)    Schedule A

Percentage Discount(s)

   Section 6.3    Schedule C

Permitted Shared Resources

   Section 1.2(a)    Exhibit C-7

Photocard Services

   Section 1.2(xxxiii)    Schedule A

Pilot Program

   Section 3.7(d)    PSA

Plasticard Purging

   Section 1.2(xxxiv)    Schedule A

Plastics Production Services

   Section 2.1(w)    Schedule B

Plastics Service Level(s)

   Section 2.1(v)    Schedule B

Pool Percentage Available for Allocation for Plastics Production Services

   Section 2.1(y)    Schedule B

Pool Percentage Available for Allocation for Print Production Services

   Section 2.1(x)    Schedule B

Pre-bill

   Section 2(a)    Exhibit A-1

Print Production Services

   Section 2.1(z)    Schedule B

Print Service Level(s)

   Section 2.1(aa)    Schedule B

Printing Ratio

   Section 2.2(b)    Schedule C

 

 

Schedule Y    Y - 9    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Priority Daily Letters

   Section I(A)(11)    Exhibit B-1

Problem Management

   Section 6.7(a)    Schedule A

Problem Management Services

   Section 6.7(a)    Schedule A

Procedures Manual

   Section 2.1(ll)    PSA

Proceeding(s)

   Section 10.4(g)    PSA

Process Management Status Call

   Section 3.4(a)    Schedule B

Process Management Status Email

   Section 3.4(b)    Schedule B

Product Category

   Section 2.1(bb)    Schedule B

Product Composition for Statements and Letters

   Section 8.1    Schedule C

Production Day

   Section 2.1(cc)    Schedule B

Production Services

   Section 3.1    PSA

Production Year

   Section 4.1    PSA

Production Year 1

   Section 4.1    PSA

***

   Section 4.1    Schedule C

***

   Section 4.3(a)    Schedule C

***

   Section 4.1    Schedule C

Purchase Specifications

   Section 9.7(c)(i)    Schedule C

Qualifying Percentage

   Section 3.8(b)    Schedule C

Quarterly Plan

   Section 7.3(a)(ii)(C)    PSA

 

 

Schedule Y    Y - 10    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

RCSI

   Preamble    PSA

RCF Portfolio

   Section 1.2(xxxvi)    Schedule A

RCSI Acquires

   Section 9.7(c)(ii)(2)    Schedule C

RCSI Chip Personalization Parameters

   Section 1.2(xxxvii)    Schedule A

RCSI Confidential Information

   Section 12.5(b)    PSA

RCSI Customer Contracts

   Section 2.1(qq)    PSA

RCSI Customer Information

   Section 12.7    PSA

RCSI Customers

   Section 2.1(rr)    PSA

RCSI Data

   Section 2.1(ss)    PSA

RCSI Discount Volume

   Section 3.8(c)    Schedule C

RCSI Information

   Section 2.1(tt)    PSA

RCSI Initiated System Enhancements

   Section 3.8(b)    PSA

RCSI Onsite Employee

   Section 1.2    Exhibit X-1

RCSI Operating Expense Productivity Offset

   Section 4.3(a)    Schedule C

RCSI Relationship Executive

   Section 9.1(a)    PSA

RCSI Requirements for Human Rights

   Section 6.7    PSA

RCSI Rules

   Section 1.2(xxxviii)    Schedule A

RCSI System

   Section 1.2(xxxix)    Schedule A

Receiving Party

   Section 12.5(a)    PSA

 

 

Schedule Y    Y - 11    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Recovery Letter

   Section I(A)(12)    Exhibit B-1

Regulated Affiliate

   Introduction    Exhibit X-6

Release into the USPS Mailstream

   Section 2.1(dd)    Schedule B

Renewal Term

   Section 4.2    PSA

Replacement Statement

   Section 1.2(xlii)    Schedule A

Reprint

   Section 1.2(xliii)    Schedule A

Rerun

   Section 1.2(xliv)    Schedule A

Response Required Deadline Determined (R2D2) Letters

   Section I(A)(13)    Exhibit B-1

RFID Card

   Section 1.2(xli)    Schedule A

RFID

   Section 1.2(xl)    Schedule A

Root Cause Analysis

   Section 4.4(a)    Schedule B

Same-Day Plastics

   Section 1.2(xlv)    Schedule A

SCS Services

   Section 1.2(xlvi)    Schedule A

Service Level Credit

   Section 4.4(b)    Schedule B

Service Level Default

   Section 2.1(gg)    Schedule B

Service Level Plan

   Section 4.4(a)    Schedule B

Service Levels

   Section 2.1(ee)    Schedule B

Service Recipient

   Section 3.3    PSA

 

 

Schedule Y    Y - 12    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Service Review Call

   Section 7.3(b)(viii)    PSA

Set-up

   Section 1.2(xlvii)    Schedule A

SF Portfolio

   Section 1.2(xlviii)    Schedule A

Six Sigma

   Section 2.1(xx)    PSA

Soft Bounce

   Section 3.2(i)(ii)(A)    Schedule A

Special Letters

   Section I(A)(14)    Exhibit B-1

Special Service Level Credit

   Section 2.1(ii)    Schedule B

Special Service Level Default

   Section 2.1(jj)    Schedule B

Special Service Level

   Section 2.1(hh)    Schedule B

Statement Cycle Time

   Section I(A)(15)    Exhibit B-1

Statement Package

   Section 1.2(xlix)    Schedule A

Statement Production

   Section 1.2(l)    Schedule A

Statements

   Section 1.2(li)    Schedule A

Steering Committee

   Section 7.2    PSA

Strategic Account Meeting

   Section 7.3(b)(vii)    PSA

***

   Section 2.1(kk)    Schedule B

Subcontracting

   Section 7.6    PSA

Subcontractor

   Section 7.6    PSA

 

 

Schedule Y    Y - 13    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Successor

   Section 18.6(a)    PSA

Support Services

   Section 1.2(lii)    Schedule A

System Enhancement

   Section 2.1(zz)    PSA

Tap Test

   Section 1.2(liii)    Schedule A

Technology

   Section II(A)(1)    Exhibit A-2

Term

   Section 4.1    PSA

Terminated Services

   Section 18.6(a)    PSA

Termination for Cause

   Section 10.1    Schedule C

Termination for Convenience

   Section 10.2    Schedule C

Termination/Expiration Assistance Plan

   Section 18.6(b)(i)    PSA

Termination/Expiration Assistance

   Section 18.6(a)    PSA

the Dispute Notice

   Section 17.2(a)    PSA

Tier 1 Postage Rate

   Section 3.3(a)(i)    Schedule C

Tier 2 Postage Rate

   Section 3.3(a)(ii)    Schedule C

Tracking Service Level

   Section 2.1(ll)    Schedule B

Transaction Card

   Section 1.2(liv)    Schedule A

Transaction Card Package

   Section 1.2(lv)    Schedule A

 

 

Schedule Y    Y - 14    RCSI / First Data Confidential


Final Execution Version

 

Defined Term

  

Defined

  

Primary Use Location

Transaction Card Production

   Section 1.2(lvi)    Schedule A

Trigger Event

   Section 4.6(b)(i)(A)(2)    Schedule B

TSA Services

   Section 2.1(ccc)    PSA

TSA

   Section 1.1(b)    PSA

Unit Cost Increase

   Section 7    Schedule C

Unit

   Section 2.1(mm)    Schedule B

USPS

   Section 2.1(nn)    Schedule B

Virus

   Section 2.1(ddd)    PSA

Volume Discount Level(s)

   Section 6.3    Schedule C

Weighting Factor for Plastics Production Services

   Section 2.1(oo)    Schedule B

Weighting Factor for Print Production Services

   Section 2.1(pp)    Schedule B

will

   Section 19.17(c)    PSA

WMS and Warehouse Management System

   Section 1.2(lvii)    Schedule A

Working Day

   Section 2.1(rr)    Schedule B

written

   Section 19.17(c)    PSA

Wrong Material

   Section 2.1(qq)    Schedule B

Wrong Materials SLA

   Section 4.6(c)(i)    Schedule B

 

 

Schedule Y    Y - 15    RCSI / First Data Confidential


1st AMENDMENT TO FIRST AMENDED AND RESTATED PRODUCTION SERVICES AGREEMENT

This 1st Amendment (this “Amendment”) to the First Amended and Restated Production Services Agreement dated as of December 1, 2009, as amended (the “Agreement”) is made and entered into this 1 day of December, 2009 by and between Retailer Credit Services, Inc. (“Customer’’) and First Data Resources, LLC (“FDR”). For good and valuable consideration, the receipt and sufficiency of which is hereby acknowledged, Customer and FDR agree as follows:

1. All terms set forth in this Amendment are effective as of December 1, 2009.

2. Exhibit “B-4” of the Agreement is hereby amended by the replacement of Exhibit B-4, Customer Billing Groupings, with the following:

EXHIBIT B-4

CUSTOMER BILLING GROUPINGS

RCSI Customer / Product Category Listing - For PSA Penalty Calculations - ***

 

RCSI Customer

 

Client ID /

System ID

 

Product

Category

 

Portfolio Description

 

Billing PSA

Party #

***  

5006 / 3941

5006 / 9369

 

Consumer

Consumer

 

Visa Dual Card

US PLCC

 

24021

23223

***  

5302 / 9079

Multi systems

  Consumer  

Sales Finance - Multi

Portfolios

  20811
***  

5404 / 6210

5404 / 9112

5404 / 9273

 

Consumer

Consumer

BRC

 

Discover Dual Card

US PLCC

US BRC and

Community

 

22481

20297

22341

***  

5433 / 1246

5433 / 9119

5433 / 9344

 

Consumer

Consumer

Consumer

 

MC Dual Card

US PLCC

Puerto Rico PLCC

 

22502

20704

23098

***   5484 / 9140   Consumer   US PLCC   20898
***   5484 / 9221   Consumer   US PLCC   20975
***  

5484 / 9222

8640 / 1320

 

Consumer

Consumer

 

US PLCC

Dual Card

 

21358

22446

***  

5484 / 9249

5956 / 7591

 

Consumer

GECOM/PROX

 

US PLCC

Commercial

 

22016

24019

***  

5484 / 9254

5957 / 7595

 

Consumer

GECOMIPROX

 

US PLCC

Commercial

 

21970

24824


***   5484 / 9255   Consumer   US PLCC   21972
***  

5484 / 9263

8640 / 1192

 

Consumer

Consumer

 

US PLCC

Dual Card

 

22390

22498

***   5484 / 9266   Consumer   US PLCC   22369
***   5484 / 9267   Consumer   US PLCC   22515
***   5484 / 9270   Consumer  

US PLCC and BRC

mixed

  22581
***  

5484 / 9275

8640 / 5160

 

Consumer

Consumer

 

US PLCC

Dual Card

 

22336

24051

***  

5484 / 9218

8640 / 1310

 

Consumer

Consumer

 

US PLCC

Dual Card

 

22313

21869

***   5484 / 9279   Consumer   US PLCC   22326
***   5484 / 9285   Consumer   US PLCC   22334
***   5484 / 9286   Consumer   US PLCC   22317
***   5484 / 9339   Consumer   US PLCC   22504
***  

5484 / 9341

8640 / 1313

 

Consumer

Consumer

 

US PLCC

Dual Card

 

22493

23314

***  

5484 / 9342

7828 / 7692

 

Consumer

GECOMIPROX

 

US PLCC

Commercial

 

22495

24061

***  

5484 / 9343

8640 / 1199

 

Consumer

Consumer

 

US PLCC

Dual Card

 

22501

22500

***  

5651 / 6330

5651 / 9336

5651 / 1182

 

Consumer

Consumer

Consumer

 

AMEX Dual Card

US PLCC Platinum

 

23145

22519

22519

***   6128 / 9356   Consumer   US PLCC   23067
***   6128 / 9357   Consumer   US PLCC   23639

GE Money

 

6496 / 1298

 

6496 / 1411

6496 / 1431

6496 / 3935

6496 / 9252

 

Consumer

 

Consumer

Consumer

Consumer

Consumer

 

Dual Card - Multi

Portfolios

Elfun

Pacific Capital

Hancock Bank

F1ex

 

23189

 

22463

23189

23189

21994

 

2


***  

6544 / 3179

6544 / 9143

 

Consumer

Consumer

 

Dual Card

USPLCC

 

23516

21949

***  

6544 / 3179

6544 / 9143

 

Consumer

Consumer

 

Dual Card

US PLCC

 

23516

21949

***  

6544 / 3179

6544 / 9143

 

Consumer

Consumer

 

Dual Card

US PLCC

 

23516

21949

***  

6709 / 6212

6709 / 9277

6709 / 6213

6709 / 9280

5966 / 7601

 

Consumer

Consumer

BRC

BRC

GECOMIPROX

 

Discover Dual Card

US PLCC

Discover Dual Card

US PLCC

Commercial

 

22542

22345

23446

22343

22525

***  

7009 / 4543

7009 / 9294

7009 / 9286

5879 / 7950

 

Consumer

Consumer

BRC

GECOMIPROX

 

Dual Card

US PLCC

US PLCC

Commercial

 

23623

22366

22366

24822

***   8640 / 1190   Consumer   Dual Card   22487
***   8640 / 1312   Consumer   Dual Card   23581
***   5958 / 7597   GECOM / PROX   Commercial   22546

Inactive

7001 / 9612

  ***   Consumer   US PLCC   22473

 

3


Inactive

7001 / 9332

  ***   Consumer   US PLCC   22473

Inactive

7001 / 9147

7001 / 9142

7001 / 9616

7001 / 9144

7001 / 9141

 

 

***

  Consumer   US PLCC   22473

3. As hereby amended and supplemented, the Agreement shall remain in full force and effect.

IN WITNESS WHEREOF, the parties hereto have executed this Amendment to First Amended and Restated Production Services Agreement the day and year first above written.

 

FIRST DATA RESOURCES, LLC     RETAILER CREDIT SERVICES, INC.
By:   /s/ Karol Svoboda     By:   /s/ Carol Juel
 

 

     

 

Title:  

Client Services

    Title:  

VP IT Services-Security 12/21/10

  Vice President 10/18/2010          

 

4


AMENDMENT NUMBER 2 TO

FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

This Amendment Number 2 (this “Amendment”) to the First Amended and Restated Production Services Agreement, dated as of December 1, 2009 (the “FAAR PSA”) is made and entered into this 12th day of October, 2010 (the “Amendment      Execution Date”), and, except as otherwise specified in this Amendment, effective as of March 1, 2010 (the “Amendment      Effective Date”) by and between RETAILER CREDIT SERVICES, INC. (“RCSI”) and FIRST DATA RESOURCES, LLC (“First Data”). For good and valuable consideration, the receipt and sufficiency of which is hereby acknowledged by the Parties, RCSI and First Data agree as follows:

1. Additional Postage Related Services. Section 6.5 of Schedule A (Services) to the FAAR PSA is hereby amended by adding the following subsections (h), (i) and (j):

(h) Subject to the conditions set forth in Section 6.5(i) below, commencing on May 5, 2010, First Data may perform co-mingling across virtual form types (hereinafter referred to as “Virtual Sorting”) at the client number level for RCSI’s Sales Finance Portfolio. Also commencing on May 5, 2010, First Data may, for any RCSI portfolios, optimize postage by sorting at or within the virtual form level through the use of MailStream Plus, or alternative software that performs the same functionality, provided that such alternative software has no material negative impact to existing RCSI processes, performance, expenses and efficiency.

(i) Notwithstanding Section 6.5(h) above, First Data will not, for any RCSI portfolio, perform Virtual Sorting during the Friday cycle following a major First Data System release, nor will First Data perform Virtual Sorting during the Wednesday cycle following a minor First Data System release. In addition, First Data agrees to not perform Virtual Sorting for any RCSI portfolio during the first cycle following a scheduled First Data statement code release. Further, First Data will provide reasonable advance notification to RCSI of any instance in which statement code for a specific RCSI portfolio or portfolios is being modified or implemented as a result of a request by RCSI in connection with an IR or exception request, and RCSI may, at its discretion by giving reasonable advance notice to First Data, elect not to have First Data perform Virtual Sorting with respect to such portfolio or portfolios. In order to invoke such an election, RCSI must notify First Data in writing prior to 12:00 noon Central Time for the particular night’s cycle; provided, that for a Sunday night cycle, such request must be received prior to 12:00 noon Central Time the Friday before the particular cycle.

The process set forth in this Section 6.5(i) will be reviewed not later than six (6) months following First Data’s installation of the Divert Management Process described in Section 6.50) below, and every six (6)


months thereafter until RCSI, in its sole discretion, decides such process is no longer necessary. No changes to the terms set forth in the FAAR PSA (as amended herein) will be made based upon any such review without the mutual written agreement of RCSI and First Data.

(j) Upon the implementation by First Data of the Divert Management Process functionality, First Data may use Virtual Sorting for all RCSI portfolios serviced by First Data under the FAAR PSA RCSI, in its sole discretion, either remotely or on- site at the applicable First Data facility, will have the right to view a test or multiple tests of the Divert Management Process functionality and approve that the functionality works as described in the definition of the Divert Management Process prior to such roll out process. For purposes of this Section 6.5(j), the “Divert Management Process” means the ability to divert selected accounts that share the same virtual form type, within client numbers and across client numbers, from the print job prior to or during the inserting process, preventing the selected accounts that share the same virtual form type from entering the mail stream while allowing all non-selected accounts to process and mail normally.

2. Changes to Postage Charges. The following changes are made to Schedule C (Charges) to the FAAR PSA:

 

  (a) Section 3.3(a)(i) is hereby deleted and replaced with the following:

“(i) ***, (A) for the period commencing on March 1, 2010 and ending on March 31, 2010, *** based upon First Data’s average daily mail volumes during such month (i.e., the total number of RCSI and non-RCSI mail pieces produced by or on behalf of First Data in the United States divided by the number of mailing days)(hereinafter referred to as ‘First Data’s Average Daily Mail Volume”), (B) for the period commencing on April 1, 2010 and ending on August 31, 2010, *** based upon First Data’s Average Daily Mail Volume during such month, ***, and (C) commencing on September 1, 2010 and thereafter, *** based upon First Data’s Average Daily Mail Volume:

 

First Data’s Average Daily  
Mail Volume During the Month   ***
***   ***
***   ***
***   ***
***   ***

As reflected in Sections 3.3(a)(ii) and 3.5 of Schedule C to the FAAR PSA, a First Data’s Average Daily Mail Volume during the month of ***, assuming RCSI’s average daily mail volumes (i.e. - the total number of mail pieces divided by the number of mailing days) during such month are at least *** pieces of mail.


Each of the fees in this Section 3.3(a)(i) are subject to Postage Rate Adjustment; and”

 

  (b) Section 3.5(c) is hereby deleted and replaced with the following:

“First Data’s Average Daily Mail Volume during such month is at least *** pieces of mail.”

3. Remaining Terms. As hereby amended and supplemented, the FAAR PSA shall remain in full force and effect. In the event of any conflict between the terms and conditions of this Amendment and the terms and conditions of the FAAR PSA, the terms and conditions of this Amendment shall prevail.

IN WITNESS WHEREOF, the Parties hereto have executed this Amendment to the First Amended and Restated Production Services Agreement the day and year first above written.

 

FIRST DATA RESOURCES, LLC     RETAILER CREDIT SERVICES, INC.
By:   /s/ Karol Svoboda     By:   /s/ Carol Juel
 

 

     

 

Title:  

Vice President 10/15/2010

    Title:  

VP IT Services-Security 12/21/10


AMENDMENT NUMBER FOUR TO FIRST AMENDED AND RESTATED

PRODUCTION SERVICES AGREEMENT

This Amendment Number Four (this “Amendment”) to the First Amended and Restated Production Services Agreement dated as of December 1, 2009 (the “FAAR PSA”) is made and entered into this 25th day of June, 2012 by and between Retailer Credit Services, Inc. (“RCSI”) and First Data Resources, LLC (“First Data”). For good and valuable consideration, the receipt and sufficiency of which is hereby acknowledged by the Parties, RCSI and First Data agree as follows:

 

  1. As of this 15th day of September, 2012 (the “Amendment Effective Date”), Subsections (v) and (vi) of subsection (a) (General) of Section 6.8 (Disaster and Business Recovery) of Schedule A (Services) to the FAAR PSA are hereby amended to state as follows:

“(v) In the event of a disaster event or Outage ***:

 

  (A) Within the Start-Up Time Period following a disaster declaration, First Data will begin to produce RCSI statements and Adverse Action Letters at an alternate First Data location ***. First Data will use commercially reasonable efforts to begin to produce statements and Adverse Action Letters at an alternate First Data location *** sooner than the Start-Up Period following a disaster declaration. These BCP support services are described in more detail on Exhibit A (attached hereto). ***. “Start-Up Time Period” means *** following a disaster declaration, “Adverse Action Letters” means that list of letters contained on Attachment B hereto, as such list may be modified or supplemented from time to time.

 

  (B) ***

 

  (C) Depending on the ***, it will take First Data up to the following number of additional days following the beginning of production of RCSI statements *** to begin ***:

 

***

   ***

***

   ***

***

   ***

***

   ***


***

   ***

***

   ***

***

   ***

***

   ***

“Backlog” means (a) the work in process at First Data’s impacted facility at the time of the issue that caused the disaster declaration, (b) any additional work generated between the time of the issue that caused the disaster declaration and the beginning of production of RCSI statements *** and (c) any additional work generated after the beginning of production at the alternate location until the time when First Data is back to *** at the alternate location. RCSI may prioritize the order in which First Data performs RCSI’s work and First Data will work with RCSI to accommodate such prioritization (i.e. First-in-first-out, client considerations, etc.). First Data will advise RCSI of its available capacity at First Data’s alternate facility as it relates to RCSI work and RCSI may prioritize which work its wants performed at such facility based on this information.

 

  (D) While First Data is acting in accordance with its disaster recovery plan, First Data will ***.

 

  (E) While First Data is acting in accordance with its disaster recovery plan, First Data will ***. Thereafter, while First Data is acting in accordance with its disaster recovery plan, ***. This commitment regarding plastics is contingent on (a) *** (b) RCSI ensuring periodically refreshed plastics and other applicable materials are available at First Data BCP facilities in accordance with mutually agreed processes. “New Account Plastics” means plastics for new cardholders of RCSI and excludes reissues, replacements and masses.

 

  (F) The timing commitments described in (A), (B), (C), (D) and (E) above apply notwithstanding *** shall in no way supersede such timing commitments.

 

  (G) First Data will redirect the necessary print files to the alternate First Data location ***.


  (H) First Data will substitute with generic materials if an adequate supply of custom stock is not immediately available at the alternate site from off-site storage, except that First Data will utilize envelopes with appropriate window placements for cardholder addresses specific to the applicable RCSI client.

 

  (I) First Data will include regulatory inserts if they are available at the time of the insertion process.

 

  (J) The commitments in this Section (v) are contingent on the Host System being able to produce print files or receipt of the print file from any other applicable systems (e.g. RCSI’s Genesis system). “Host System” means the system of record on which the applicable card accounts are maintained and which generates the print files.

 

  (K) *** will be solely responsible for *** of meeting First Data’s BCP requirements under this Section (v) including ***. First Data will use its best efforts to *** allow for the inclusion of the *** processes as part of the comprehensive First Data disaster recovery test scheduled for September 2012. In the event First Data is unable to *** to meet First Data’s BCP requirements under this Section (v), *** the applicable amounts provided for in (i) and (ii) above within ninety (90) days after *** receipt of formal request for said reimbursement by ***. In addition to the foregoing costs and expenses, *** will bear the costs of providing the *** to allow for the provision of the services covered by this Amendment.

 

  (L) First Data will keep RCSI informed of conditions that may necessitate a disaster declaration and will promptly consult with RCSI on when a disaster may be declared. The ultimate decision on when to declare a disaster will remain with First Data. First Data’s decision about whether to declare a disaster will be made as quickly as possible after an event that may necessitate a disaster declaration, but in no event longer than *** hours after such event. First Data will use the following criteria, among others, in making the disaster declaration decision: (1) whether the issue will prevent First Data from performing the applicable Production Services, and (2) whether First Data can reasonably expect to remedy the issue more quickly at the primary site or whether production could be ramped up more quickly at the alternate site.


(vi) Reserved.”

 

  2. As of the Amendment Effective Date, Section 5.1 of Schedule C (Pricing) to the FAAR PSA is hereby amended to state as follows:

“5.1. RCSI agrees to purchase minimum Production Services from First Data during the Term as Follows:

 

  (a) During Production Years 3 and 4, *** for the Production Services applicable to those RCSI client portfolios included as part of General Electric Capital Corporation’s *** business unit as of the Amendment Effective Date.

 

  (b) During Production Year 5, *** of the volume of Production Services purchased from First Data in the prior Production Year (measured by charges, normalized for ***.

 

  (c) Thereafter, there shall be *** minimum commitment.

 

  3. As of the Amendment Effective Date, *** (Pricing) is hereby amended by the addition of the following new subsections at the end of the current text:

(d) ***;

[The following page was omitted pursuant to the confidential treatment request.]

 

  4. Unless otherwise specified in this Amendment, any capitalized term used in this Amendment shall have the meaning set forth in the FAAR PSA.

 

  5. Except as otherwise specified in this Amendment, the terms and conditions of the FAAR PSA shall remain in full force and effect. In the event of any conflict between the terms and conditions of this Amendment and the terms and conditions of the FAAR PSA, the terms and conditions of this Amendment shall prevail.

IN WITNESS WHEREOF, the Parties hereto have executed this Amendment to the FAAR PSA the day and year first above written.


FIRST DATA RESOURCES, LLC     RETAILER CREDIT SERVICES, INC
By:   /s/ W. Gay Rich     By:   /s/ Margaret M. Keane
Title:   Senior Vice President     Title:   Attorney In Fact


Attachment A

Section 1: BCP Volume Characteristics and Printing Specifics

 

    The *** is able to support up to *** RCSI statements (or *** pages) per month.

 

    RCSI statements, or letters *** will be handled by First Data at an alternate First Data print location in accordance with Section 6.8(v) (A), (B) and (C) of Schedule A, ***.

 

    On an annual basis, First Data and RCSI will meet to review prior year’s volumes, on-going volume estimates and necessary changes to BCP *** requirements. RCSI will provide First Data with the estimated future volumes. First Data will determine and communicate to RCSI what it considers to be the appropriate plan to support the *** in its good faith judgment, and thereafter will implement such plan. First Data will handle the expected RCSI volumes at *** an alternate First Data location.

 

    Includes Special Handling. “Special Handling” means statements greater than 4 pages or statements that require a special distribution (e.g. bulk packaging, Fed Ex, foreign mail).

 

    Does not include plastics other than New Account Plastics or inactive statements.

 

    Paper stock will be white in

 

    Monochrome (Toner- non color)

 

    Duplex

 

    300 • 600 DPI

 

    Selective inserting

 

    1 return envelope

 

    5 selective mandatory only inserts

 

    Statements or letters printed *** will be processed through ***.

 

    Following the beginning of production at the *** facility, *** will facilitate pickup of mail by the USPS *** days per week, except *** will not have *** pickup until *** days following a disaster declaration.


Section II: Other Terms and Provisions

 

    Inventory delivery and schedules will be worked out between ***.

 

    Materials used will be *** forms and *** envelopes, and such envelopes will contain the appropriate window placements for cardholder addresses specific to the applicable RCSI client.

 

    First Data will have *** and use of *** for the *** described in Section I.

 

    On an annual basis, *** will provide *** with a SSAE No. 16, SOC 2, Type II audit prepared by a third party auditor.

 

    During the period in which the ***, RCSI will have the right to perform quarterly operational audits and one additional annual audit of the *** in accordance with Section 8.1 of the FAAR PSA (none of which will not count toward the 2 audits described in Section 8.1(b) of the FAAR PSA). RCSI may participate in quarterly on-site testing at the *** location.

 

    The *** processes and preparedness will be included as part of the annual First Data disaster recovery test to ensure the soundness of First Data’s comprehensive disaster recovery plan.

 

    RCSI will pay First Data for postage at the rates described in Section 3 of Schedule C to this Agreement for all items mailed ***. RCSI will receive the IMB discount as required by the FAAR PSA for volume mailed ***. Section 13.2 (b) of Schedule C will not apply to volume mailed ***.

 

    ***.


Attachment B

LISTING OF ADVERSE ACTION LETTERS AS DEFINED BY GE – UPDATE 5/31/12

 

Letter
ID/PROC
  ***   ***   ***   Multi-
Client
Private
Label
  ***   Multi-
Client
Private
Label
  ***   ***   ***   ***   ***   Multi-
Client
Dual
Card
  Payment
Solutions
  Off-Line

7333

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

7340

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

1C20

                          Yes  

1C21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

1C22

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

1C24

                          Yes  

1C28

                          Yes  

1N06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

1W11

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    
                          Yes  

8D08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

8D3A

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

8D4A

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA11

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AA13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA13

                          Yes  

AA14

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA16

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA17

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA18

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA20

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA23

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA24

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA25

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA26

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA29

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA29

                          Yes  

AA30

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA30

                          Yes  

AA31

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA32

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA33

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA34

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA35

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA36

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA37

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA38

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA39

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA40

                          Yes  

AA40

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA41

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA42

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA43

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AA44

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA45

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA46

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA47

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA48

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA61

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA63

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA64

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA65

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA66

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA68

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA69

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA70

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA71

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA72

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA73

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA74

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA75

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA76

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA77

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA78

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA79

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA80

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA81

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA82

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA83

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA84

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA85

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA87

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA89

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AA90

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA91

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA92

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA93

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA94

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA95

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA96

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA97

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA98

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AA99

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB20

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB30

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB32

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB33

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB34

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB35

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB36

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB37

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB50

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AB55

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB56

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB61

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB62

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB63

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB64

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB65

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB66

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB70

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB71

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB72

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB73

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB74

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB75

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB76

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB77

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB78

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB79

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB80

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB81

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB82

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB83

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB84

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB85

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB86

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB87

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AB88

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AC04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC11

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC14

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC16

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC17

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC18

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC19

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC20

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC22

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC23

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC24

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC25

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC26

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC27

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC28

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC29

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC30

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC31

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC32

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC33

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC35

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC36

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AC37

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC40

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC41

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC42

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC44

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC45

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC46

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC47

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC50

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC51

                          Yes  

AC52

                          Yes  

AC53

                          Yes  

AC54

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC55

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC56

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC57

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC58

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC59

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC61

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC62

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC63

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC64

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC65

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC66

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC67

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC69

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC70

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC71

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC72

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC73

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AC74

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC75

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC77

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC78

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC79

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC80

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC81

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC82

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC83

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC84

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC85

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC86

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC87

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC88

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC89

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC90

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC91

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC97

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC98

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AC99

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD11

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AD12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD14

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD16

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD17

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD18

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD19

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD1A

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD20

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD22

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD23

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD24

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD25

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD26

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD27

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD28

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD29

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD2A

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD30

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD31

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD32

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD33

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD34

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD35

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD36

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD37

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD38

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD39

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD3A

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AD40

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD41

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD42

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD43

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD44

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD45

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD46

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD47

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD48

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD49

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD4A

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD50

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD51

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD52

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD53

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD54

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD55

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD56

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD57

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD58

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD59

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD61

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD62

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD63

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD64

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD65

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD66

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD67

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD68

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD69

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AD70

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD71

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD72

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD73

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD74

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD75

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD76

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD77

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD78

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD79

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD80

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD81

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD82

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD83

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD84

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD85

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD86

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD87

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD88

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD89

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD90

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD91

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD92

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD93

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD94

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD95

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD96

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD97

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD98

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AD99

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AE01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AE02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AF01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AF02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AF03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AF04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG61

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG70

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG71

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AG90

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AH01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AL09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM02

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM11

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AM13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM14

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM19

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM20

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM22

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM23

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM24

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM25

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM26

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM27

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM28

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM29

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM30

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM31

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM32

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM33

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM34

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM35

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM36

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM37

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM38

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM39

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM40

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM41

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM42

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM43

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM44

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM45

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM46

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AM47

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM48

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM49

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM50

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM51

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM52

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM53

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM54

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM61

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM62

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM63

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM64

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM65

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM69

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM70

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM71

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM73

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM74

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM75

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM76

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM77

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM82

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM83

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM84

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM85

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM87

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM88

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM89

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM90

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM91

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AM92

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM93

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM94

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM95

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM96

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM97

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM98

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AM99

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AO01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AO10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AO11

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AO12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AO13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP14

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP16

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP17

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP22

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP23

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP24

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP25

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP26

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP27

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP28

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP29

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AP30

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP59

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP60

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP94

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP95

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP97

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP98

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AP99

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR01

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR12

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR14

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR15

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR16

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR17

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR18

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR19

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR20

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR21

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR22

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR23

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR24

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR25

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


AR26

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR27

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AR28

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX03

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX04

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX06

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX07

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX08

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX09

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AX10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AZ98

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

AZ99

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

CCOF

                          Yes  

FD45

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

FD46

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

R002

                          Yes  

R003

                          Yes  

R004

                          Yes  

R005

                          Yes  

R006

                          Yes  

R007

                          Yes  

R014

                          Yes  

R015

                          Yes  

R030

                          Yes  

S101

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S102

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S103

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S104

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S105

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S106

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S107

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S108

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S109

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S110

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S111

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S112

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S113

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S114

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S115

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S116

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S117

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S120

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S121

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S123

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S124

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S126

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S129

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S129

                          Yes  

S130

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S131

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S133

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S134

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S135

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S136

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S138

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S139

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S140

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S142

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S145

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S148

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S160

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S161

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S163

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S164

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S168

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S170

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S171

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S172

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S173

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S174

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S175

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S176

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S177

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S178

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S179

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S180

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S181

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S182

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S183

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S184

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S185

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S187

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S188

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S189

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S190

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S191

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S192

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S193

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S194

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S195

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S197

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S198

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S199

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S200

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S201

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S202

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S203

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S204

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S205

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S206

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S207

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S208

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S210

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S220

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S221

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S232

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S233

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S234

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S235

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S236

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S237

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S250

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S255

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S256

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S260

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S261

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S262

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S263

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S264

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S265

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S266

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S270

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S271

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S272

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S273

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S274

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S275

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S276

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S277

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S278

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S279

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S280

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S281

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S282

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S283

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S284

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S301

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S302

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S303

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S304

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S305

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S306

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S307

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S309

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S310

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S311

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S312

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S315

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S316

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S317

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S318

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S319

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S320

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S323

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S324

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S325

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S326

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S327

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S328

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S329

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S331

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S332

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S333

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S335

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S336

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S337

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S340

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S344

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S345

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S346

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S347

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S350

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S354

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S355

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S356

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S357

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S358

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S359

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S360

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S361

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S362

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S363

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S364

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S365

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S366

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S367

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S369

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S370

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S371

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S372

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S373

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S374

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S375

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S377

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S378

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S379

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S380

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S381

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S382

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S383

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S384

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S385

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S386

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S387

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S388

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S389

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S390

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S391

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S397

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S398

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S401

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S460

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S461

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S470

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S471

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S490

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S501

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S502

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S503

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S510

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S519

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S520

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S521

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S522

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S523

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S524

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S525

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S526

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S527

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S528

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S529

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S530

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S531

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S532

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S533

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S534

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S535

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S536

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S537

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S538

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S539

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S540

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S541

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S545

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S546

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S547

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S548

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S549

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S550

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S551

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S552

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S553

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S554

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S560

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S561

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S562

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S563

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S564

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S565

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S566

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S567

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S568

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S569

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S570

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S571

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S573

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S574

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S575

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S576

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S577

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S582

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S583

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S584

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S585

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S587

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S588

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S589

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S590

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S591

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S592

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S593

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S594

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S595

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S596

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S597

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S598

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S599

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S601

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S610

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S611

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S612

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S613

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S705

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S706

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S708

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S709

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S712

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S713

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S714

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S715

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S716

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S717

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S724

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S725

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S759

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S760

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S794

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S795

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S797

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S798

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S799

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S801

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S803

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S804

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S805

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S806

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S807

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S808

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S809

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S810

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S812

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S813

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S814

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S815

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S816

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S817

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S818

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S819

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S820

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S821

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S822

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S823

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S824

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S825

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S826

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S901

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S902

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S903

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S904

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S905

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    


S906

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S907

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S908

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

S909

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

SA13

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes   Yes  

SD00

                          Yes  

SD45

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

SD46

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

SM87

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

SX05

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

SX10

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

X010

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

XF38

                          Yes  

Y010

  Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes   Yes     Yes   Yes    

COLR0861

                            Yes

COLR9613

                          Yes  

COLR9646

                            Yes